main
History Download
Ray Publish 0.1.0 be18f17

LT3029IDE#PBF

Analog Devices · Linear Voltage Regulators (LDO) · DFN-16-EP(3x4)

LT3029IDE#PBF from Analog Devices, in a DFN-16-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BYP1 passive Bypass pin for channel 1 reference, clamped to ±0.6V from ground, with a maximum of 10nF to OUT1 for low noise, and must be left unconnected if unused.
2 NC unconnected No connect pin, not tied to any internal circuitry, and may be floated, tied to VIN or tied to GND.
3 OUT1 power_out Channel 1 regulator output requiring a minimum 3.3µF output capacitor to prevent oscillations.
4 OUT1 power_out Channel 1 regulator output requiring a minimum 3.3µF output capacitor to prevent oscillations.
5 GND power_in Ground pin that must be tied directly to the exposed pad (pin 17) and used as the bottom reference for the output voltage setting divider.
6 OUT2 power_out Channel 2 regulator output requiring a minimum 3.3µF output capacitor to prevent oscillations.
7 OUT2 power_out Channel 2 regulator output requiring a minimum 3.3µF output capacitor to prevent oscillations.
8 BYP2 passive Bypass pin for channel 2 reference, clamped to ±0.6V from ground, with a maximum of 10nF to OUT2 for low noise, and must be left unconnected if unused.
9 ADJ2 input Channel 2 error amplifier input regulating ADJ2 to 1.215V referenced to ground, clamped to ±9V, with output range 1.215V to 19.5V.
10 SHDN2 input Channel 2 shutdown pin that turns the channel 2 output off when pulled low, and the channel is off if this pin is left unconnected.
11 IN2 power_in Channel 2 input supply pin, requiring a 1µF to 10µF bypass capacitor if located more than six inches from the main input filter capacitor.
12 IN2 power_in Channel 2 input supply pin, requiring a 1µF to 10µF bypass capacitor if located more than six inches from the main input filter capacitor.
13 IN1 power_in Channel 1 input supply pin, requiring a 1µF to 10µF bypass capacitor if located more than six inches from the main input filter capacitor.
14 IN1 power_in Channel 1 input supply pin, requiring a 1µF to 10µF bypass capacitor if located more than six inches from the main input filter capacitor.
15 SHDN1 input Channel 1 shutdown pin that turns the channel 1 output off when pulled low, and the channel is off if this pin is left unconnected.
16 ADJ1 input Channel 1 error amplifier input regulating ADJ1 to 1.215V referenced to ground, clamped to ±9V, with output range 1.215V to 19.5V.
17 GND power_in Exposed pad that is the GND electrical and thermal connection and must be soldered to the PCB ground and tied to pin 5.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-16-EP(3x4)
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
ADJ1, ADJ2 Pin Voltage VADJ 1.191 1.215 1.239 V 2.3V < VIN < 20V, 1mA < ILOAD < 500mA (E, I, MP) 3
ADJ1, ADJ2 Pin Voltage VADJ 1.203 1.215 1.227 V VIN = 2V, ILOAD = 1mA 3
Line Regulation 0.5 5 mV ΔVIN = 2V to 20V, ILOAD = 1mA 3
Load Regulation 15 mV VIN = 2.3V, ΔILOAD = 1mA to 500mA (E, I, MP) 3
Dropout Voltage 0.11 0.18 V VIN = VOUT(NOMINAL), ILOAD = 10mA 3
Dropout Voltage 0.25 V VIN = VOUT(NOMINAL), ILOAD = 10mA (l: full operating temperature range) 3
Dropout Voltage 0.16 0.22 V VIN = VOUT(NOMINAL), ILOAD = 50mA 3
Dropout Voltage 0.31 V VIN = VOUT(NOMINAL), ILOAD = 50mA (l: full operating temperature range) 3
Dropout Voltage 0.2 0.25 V VIN = VOUT(NOMINAL), ILOAD = 100mA 3
Dropout Voltage 0.34 V VIN = VOUT(NOMINAL), ILOAD = 100mA (l: full operating temperature range) 3
Dropout Voltage 0.3 0.36 V VIN = VOUT(NOMINAL), ILOAD = 500mA 3
Dropout Voltage 0.46 V VIN = VOUT(NOMINAL), ILOAD = 500mA (l: full operating temperature range) 3
GND Pin Current (per Channel) 55 150 µA VIN = VOUT(NOMINAL), ILOAD = 0mA 3
GND Pin Current (per Channel) 90 250 µA VIN = VOUT(NOMINAL), ILOAD = 1mA 3
GND Pin Current (per Channel) 1.1 2 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 3
GND Pin Current (per Channel) 2 3.5 mA VIN = VOUT(NOMINAL), ILOAD = 100mA 3
GND Pin Current (per Channel) 4.3 8 mA VIN = VOUT(NOMINAL), ILOAD = 250mA 3
GND Pin Current (per Channel) 10 16 mA VIN = VOUT(NOMINAL), ILOAD = 500mA 3
Output Voltage Noise 20 µVRMS COUT = 10µF, CBYP = 10nF, ILOAD = 500mA, BW = 10Hz to 100kHz 3
ADJ1/ADJ2 Pin Bias Current 30 100 nA ADJ1, ADJ2 3
Shutdown Threshold (Off to On) 0.45 1.1 V VOUT = Off to On 3
Shutdown Threshold (On to Off) 0.2 0.4 V VOUT = On to Off 3
SHDN1/SHDN2 Pin Current 0 0.5 µA VSHDN1, VSHDN2 = 0V 3
SHDN1/SHDN2 Pin Current 0.6 3 µA VSHDN1, VSHDN2 = 20V 3
Quiescent Current in Shutdown (per Channel) 0.01 0.1 µA VIN = 6V, VSHDN1 = 0V, VSHDN2 = 0V 3
Ripple Rejection 55 67 dB VIN = 2.715V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 500mA 3
Current Limit 1.5 A VIN = 7V, VOUT = 0V 3
Current Limit 520 mA VIN = 2.3V, ΔVOUT = -0.1V (l) 3
Input Reverse Leakage Current 1 mA VIN = -20V, VOUT = 0V (l) 3
Reverse Output Current 0.5 10 µA VOUT = 1.215V, VIN = 0V 3
Minimum Input Voltage 1.8 2.3 V ILOAD = 500mA (l) 3
IN1, IN2 Pin Voltage -22 22 V Absolute maximum rating 2
OUT1, OUT2 Pin Voltage -22 22 V Absolute maximum rating 2
Input-to-Output Differential Voltage -22 22 V Absolute maximum rating 2
ADJ1, ADJ2 Pin Voltage -9 9 V Absolute maximum rating 2
BYP1, BYP2 Pin Voltage -0.6 0.6 V Absolute maximum rating 2
SHDN1, SHDN2 Pin Voltage -22 22 V Absolute maximum rating 2
Operating Junction Temperature (LT3029I) TJ -40 125 °C LT3029I 2
Storage Temperature Range -65 150 °C 2
Junction-to-Ambient Thermal Resistance (DE package) θJA 38 °C/W DE package, 16-lead DFN 2
Junction-to-Case Thermal Resistance (DE package) θJC 4.3 °C/W DE package, exposed pad 14
Junction-to-Ambient Thermal Resistance vs Copper Area θJA 36 °C/W Topside 2500mm2, backside 2500mm2, board area 2500mm2 15
Junction-to-Ambient Thermal Resistance vs Copper Area θJA 37 °C/W Topside 1000mm2, backside 2500mm2, board area 2500mm2 15
Junction-to-Ambient Thermal Resistance vs Copper Area θJA 38 °C/W Topside 225mm2, backside 2500mm2, board area 2500mm2 15
Junction-to-Ambient Thermal Resistance vs Copper Area θJA 40 °C/W Topside 100mm2, backside 2500mm2, board area 2500mm2 15
Minimum Output Capacitor COUT 3.3 µF Required for stability 11
Output Capacitor ESR ESR 3 Ω Minimum output capacitor of 3.3µF with ESR of 3Ω or less 13

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts COPPER Table 2. DE Package, 16-Lead DFN COPPER AREA THERMAL RESISTANCE 15

CAD (KiCad official)

  • Symbol: LT3029IDE#PBF
  • Footprint: Package_DFN_QFN:DFN-16-1EP_3x4mm_P0.45mm_EP1.7x3.3mm
  • 3D model: DFN-16-EP(3x4) (KiCad packages3D, STEP)
  • 3D model files: lt3029ide-pbf-etched.step / lt3029ide-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3029ide-pbf.step / lt3029ide-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 08d182f1012f90a4, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF