main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3024ede-pbf: viewers · Ray
lt3024ede-pbf-etched.glb Publish 0.1.0 · Ray
lt3024ede-pbf-etched.step lt3024ede-pbf: factory component page (tier=mfr) · Ray
lt3024ede-pbf-hero.glb lt3024ede-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3024ede-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt3024ede-pbf.glb Publish 0.1.0 · Ray
lt3024ede-pbf.kicad_mod Publish 0.1.0 · Ray
lt3024ede-pbf.kicad_sym Publish 0.1.0 · Ray
lt3024ede-pbf.lbr Publish 0.1.0 · Ray
lt3024ede-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 13 pins · Ray

LT3024EDE#PBF

Analog Devices · Linear Voltage Regulators (LDO) · DFN-12-EP(3x4)

LT3024EDE#PBF from Analog Devices, in a DFN-12-EP(3x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 BYP1 passive Bypass pin for Output 1 reference, clamped internally to ±0.6V from ground; a capacitor of up to 0.01μF from OUT1 lowers noise to a typical 20μVRMS, and it must be left unconnected if unused.
2 OUT1 power_out Output 1 supplying up to 500mA to the load, requiring a minimum output capacitor of 3.3μF.
3 OUT1 power_out Output 1 supplying up to 500mA to the load, requiring a minimum output capacitor of 3.3μF (second OUT1 pin).
4 GND power_in Ground pin.
5 OUT2 power_out Output 2 supplying up to 100mA to the load, requiring a minimum output capacitor of 1μF to prevent oscillations.
6 BYP2 passive Bypass pin for Output 2 reference, clamped internally to ±0.6V from ground; a capacitor of up to 0.01μF from OUT2 lowers noise to a typical 20μVRMS, and it must be left unconnected if unused.
7 ADJ2 input Error amplifier input for Output 2, internally clamped to ±7V, regulated to 1.22V with about 30nA bias current flowing into the pin; output range is 1.22V to 20V.
8 SHDN2 input Shutdown control for Output 2, where output is off when the pin is pulled low; it must be connected to VIN if unused and the device will not function if left unconnected.
9 IN power_in Input supply pin common to both regulators, with 1.8V to 20V operating range and reverse-voltage protection, and a 1μF to 10μF bypass capacitor is sufficient when needed.
10 IN power_in Input supply pin common to both regulators, with 1.8V to 20V operating range and reverse-voltage protection (second IN pin).
11 SHDN1 input Shutdown control for Output 1, where output is off when the pin is pulled low; it must be connected to VIN if unused and the device will not function if left unconnected.
12 ADJ1 input Error amplifier input for Output 1, internally clamped to ±7V, regulated to 1.22V with about 30nA bias current flowing into the pin; output range is 1.22V to 20V.
13 GND power_in Exposed pad is ground and must be soldered to PCB ground for optimum thermal performance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-12-EP(3x4)
Category Power Supply Chip
Pins 13

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage (Output 2) VIN(MIN) 1.8 2.3 V Output 2, ILOAD = 100mA, full temp range 3
Minimum Input Voltage (Output 1) VIN(MIN) 1.8 2.3 V Output 1, ILOAD = 500mA, full temp range 3
ADJ Pin Voltage VADJ 1.205 1.22 1.235 V VIN = 2V, ILOAD = 1mA 3
ADJ Pin Voltage (Output 2) VADJ 1.19 1.22 1.25 V Output 2, 2.3V < VIN < 20V, 1mA < ILOAD < 100mA 3
ADJ Pin Voltage (Output 1) VADJ 1.19 1.22 1.25 V Output 1, 2.3V < VIN < 20V, 1mA < ILOAD < 500mA 3
Line Regulation 1 10 mV ΔVIN = 2V to 20V, ILOAD = 1mA 3
Load Regulation (Output 2) 1 12 mV Output 2, VIN = 2.3V, ΔILOAD = 1mA to 100mA 3
Load Regulation (Output 2, full temp) 25 mV VIN = 2.3V, ΔILOAD = 1mA to 100mA, full temp range 3
Load Regulation (Output 1) 1 12 mV Output 1, VIN = 2.3V, ΔILOAD = 1mA to 500mA 3
Load Regulation (Output 1, full temp) 25 mV VIN = 2.3V, ΔILOAD = 1mA to 500mA, full temp range 3
Dropout Voltage Output 2 0.1 0.15 V VIN = VOUT(NOMINAL), ILOAD = 1mA 3
Dropout Voltage Output 2 (full temp) 0.19 V ILOAD = 1mA, full temp range 3
Dropout Voltage Output 2 0.17 0.22 V VIN = VOUT(NOMINAL), ILOAD = 10mA 3
Dropout Voltage Output 2 (full temp) 0.29 V ILOAD = 10mA, full temp range 3
Dropout Voltage Output 2 0.24 0.31 V VIN = VOUT(NOMINAL), ILOAD = 50mA 3
Dropout Voltage Output 2 (full temp) 0.4 V ILOAD = 50mA, full temp range 3
Dropout Voltage Output 2 0.3 0.35 V VIN = VOUT(NOMINAL), ILOAD = 100mA 3
Dropout Voltage Output 2 (full temp) 0.45 V ILOAD = 100mA, full temp range 3
Dropout Voltage Output 1 0.13 0.19 V VIN = VOUT(NOMINAL), ILOAD = 10mA 3
Dropout Voltage Output 1 (full temp) 0.25 V ILOAD = 10mA, full temp range 3
Dropout Voltage Output 1 0.17 0.22 V VIN = VOUT(NOMINAL), ILOAD = 50mA 3
Dropout Voltage Output 1 (full temp) 0.32 V ILOAD = 50mA, full temp range 3
Dropout Voltage Output 1 0.2 0.34 V VIN = VOUT(NOMINAL), ILOAD = 100mA 3
Dropout Voltage Output 1 (full temp) 0.44 V ILOAD = 100mA, full temp range 3
Dropout Voltage Output 1 0.3 0.35 V VIN = VOUT(NOMINAL), ILOAD = 500mA 3
Dropout Voltage Output 1 (full temp) 0.45 V ILOAD = 500mA, full temp range 3
GND Pin Current Output 2 20 45 μA VIN = VOUT(NOMINAL), ILOAD = 0mA 3
GND Pin Current Output 2 55 90 μA VIN = VOUT(NOMINAL), ILOAD = 1mA 3
GND Pin Current Output 2 230 400 μA VIN = VOUT(NOMINAL), ILOAD = 10mA 3
GND Pin Current Output 2 1 2 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 3
GND Pin Current Output 2 2.2 4 mA VIN = VOUT(NOMINAL), ILOAD = 100mA 3
GND Pin Current Output 1 30 75 μA VIN = VOUT(NOMINAL), ILOAD = 0mA 3
GND Pin Current Output 1 65 120 μA VIN = VOUT(NOMINAL), ILOAD = 1mA 3
GND Pin Current Output 1 1.1 1.6 mA VIN = VOUT(NOMINAL), ILOAD = 50mA 3
GND Pin Current Output 1 2 3 mA VIN = VOUT(NOMINAL), ILOAD = 100mA 3
GND Pin Current Output 1 5 8 mA VIN = VOUT(NOMINAL), ILOAD = 250mA 3
GND Pin Current Output 1 11 16 mA VIN = VOUT(NOMINAL), ILOAD = 500mA 3
ADJ Pin Bias Current 30 100 nA ADJ1, ADJ2 3
Shutdown Threshold (Off to On) 0.25 0.65 V VOUT = Off to On 3
Shutdown Threshold (On to Off) 0.25 0.8 V VOUT = On to Off 3
SHDN Pin Current 0 0.5 μA VSHDN1, VSHDN2 = 0V 3
SHDN Pin Current 1 3 μA VSHDN1, VSHDN2 = 20V 3
Quiescent Current in Shutdown 0.01 0.1 μA VIN = 6V, VSHDN1 = 0V, VSHDN2 = 0V 3
Ripple Rejection 55 65 dB VIN = 2.72V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = Full Current 3
Current Limit Output 2 200 mA Output 2, VIN = 7V, VOUT = 0V 4
Current Limit Output 2 110 mA VIN = 2.3V, ΔVOUT = -0.1V, full temp range 4
Current Limit Output 1 700 mA Output 1, VIN = 7V, VOUT = 0V 4
Current Limit Output 1 520 mA VIN = 2.3V, ΔVOUT = -0.1V, full temp range 4
Input Reverse Leakage Current 1 mA VIN = -20V, VOUT = 0V, full temp range 4
Reverse Output Current 5 10 μA VOUT = 1.22V, VIN < 1.22V 4
Output Voltage Noise 20 μVRMS COUT = 10μF, CBYP = 0.01μF, ILOAD = Full Current, BW = 10Hz to 100kHz 3
IN Pin Voltage -20 20 V 2
OUT1, OUT2 Pin Voltage -20 20 V 2
Input-to-Output Differential Voltage -20 20 V 2
ADJ1, ADJ2 Pin Voltage -7 7 V 2
BYP1, BYP2 Pin Voltage -0.6 0.6 V 2
SHDN1, SHDN2 Pin Voltage -20 20 V 2
Operating Junction Temperature Range TJ -40 125 °C 2
Storage Temperature Range (DE Package) -65 125 °C DE Package 2
Maximum Junction Temperature TJMAX 150 °C DE12 package 2
Thermal Resistance Junction-to-Ambient θJA 40 °C/W DE12 package 2
Thermal Resistance Junction-to-Case θJC 10 °C/W DE12 package, at Exposed Pad 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts COPPER Table 1. FE Package, 16-Lead TSSOP COPPER AREA 16

CAD (KiCad official)

  • Symbol: LT3024EDE#PBF
  • Footprint: Package_DFN_QFN:DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm
  • 3D model: DFN-12-EP(3x4) (KiCad packages3D, STEP)
  • 3D model files: lt3024ede-pbf-etched.step / lt3024ede-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3024ede-pbf.step / lt3024ede-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 855a50cedf0b42bf, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF