main
Ray
Publish 0.1.0
5143112
LT3014BMPS5#TRMPBF
Analog Devices · Pre-ordered Chips · TSOT-23-5
LT3014BMPS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, rated for ±80V operating with a 3V to 80V input range, and a 0.1µF to 10µF bypass capacitor is recommended when the device is more than six inches from the input filter. |
| 2 | GND | power_in | Ground reference pin; the GND pin current is the worst-case quiescent current path, reaching 650µA at 20mA load in dropout. |
| 3 | NC | unconnected | No connect pin that may be floated, tied to IN or tied to GND. |
| 4 | ADJ | input | Error amplifier input that servos to 1.22V referenced to ground, is internally clamped to ±7V, and has a 4nA bias current flowing into the pin. |
| 5 | OUT | power_out | Regulated output that requires a minimum 0.47µF output capacitor to prevent oscillations, with the OUT pin rated for ±60V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | 3 | 3.3 | V | ILOAD = 20mA | 4 | ||
| ADJ Pin Voltage | VADJ | 1.2 | 1.22 | 1.24 | V | VIN = 3.3V, ILOAD = 100µA | 4 |
| ADJ Pin Voltage | VADJ | 1.18 | 1.22 | 1.26 | V | 3.3V < VIN < 80V, 100µA < ILOAD < 20mA | 4 |
| Current Limit | 25 | mA | VIN = 3.3V, DVOUT = -0.1V (Note 2) | 4 | |||
| Input Reverse Leakage Current | 6 | mA | VIN = -80V, VOUT = 0V | 4 | |||
| Ripple Rejection | 60 | 70 | dB | VIN = 7V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 20mA | 4 | ||
| Line Regulation | 1 | 10 | mV | DVIN = 3.3V to 80V, ILOAD = 100µA (Note 2) | 4 | ||
| Load Regulation | 13 | 25 | mV | VIN = 3.3V, DILOAD = 100µA to 20mA (Note 2) | 4 | ||
| Load Regulation | 40 | mV | VIN = 3.3V, DILOAD = 100µA to 20mA | 4 | |||
| Dropout Voltage | 120 | 180 | mV | VIN = VOUT(NOMINAL), ILOAD = 100µA (Notes 4, 5) | 4 | ||
| Dropout Voltage | 250 | mV | VIN = VOUT(NOMINAL), ILOAD = 100µA | 4 | |||
| Dropout Voltage | 200 | 270 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA (Notes 4, 5) | 4 | ||
| Dropout Voltage | 360 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA | 4 | |||
| Dropout Voltage | 300 | 350 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA (Notes 4, 5) | 4 | ||
| Dropout Voltage | 450 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA | 4 | |||
| Dropout Voltage | 350 | 410 | mV | VIN = VOUT(NOMINAL), ILOAD = 20mA (Notes 4, 5) | 4 | ||
| Dropout Voltage | 570 | mV | VIN = VOUT(NOMINAL), ILOAD = 20mA | 4 | |||
| GND Pin Current | 7 | 20 | µA | VIN = VOUT(NOMINAL), ILOAD = 0mA (Notes 4, 6) | 4 | ||
| GND Pin Current | 12 | 30 | µA | VIN = VOUT(NOMINAL), ILOAD = 100µA (Notes 4, 6) | 4 | ||
| GND Pin Current | 40 | 100 | µA | VIN = VOUT(NOMINAL), ILOAD = 1mA (Notes 4, 6) | 4 | ||
| GND Pin Current | 250 | 450 | µA | VIN = VOUT(NOMINAL), ILOAD = 10mA (Notes 4, 6) | 4 | ||
| GND Pin Current | 650 | 1000 | µA | VIN = VOUT(NOMINAL), ILOAD = 20mA (Notes 4, 6) | 4 | ||
| Output Voltage Noise | 115 | µVRMS | COUT = 0.47µF, ILOAD = 20mA, BW = 10Hz to 100kHz | 4 | |||
| ADJ Pin Bias Current | 4 | 10 | nA | (Note 7) | 4 | ||
| Current Limit | 70 | mA | VIN = 7V, VOUT = 0V | 4 | |||
| Reverse Output Current | 2 | 4 | µA | VOUT = 1.22V, VIN < 1.22V (Note 2) | 4 | ||
| IN Pin Voltage, Operating | -80 | 80 | V | 2 | |||
| OUT Pin Voltage | -60 | 60 | V | 2 | |||
| IN to OUT Differential Voltage | -80 | 80 | V | 2 | |||
| ADJ Pin Voltage | -7 | 7 | V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | ThinSOT package | 2 | ||
| Operating Junction Temperature Range | -55 | 125 | °C | MP-Grade | 2 | ||
| Thermal Resistance Junction-to-Ambient (θJA) | θJA | 150 | °C/W | SOT-23 package, TJMAX = 125°C | 2 | ||
| Thermal Resistance Junction-to-Case (θJC) | θJC | 25 | °C/W | SOT-23 package, measured at pin 2 | 2 | ||
| SOT-23 Measured Thermal Resistance (junction-to-ambient) | θJA | 125 | °C/W | 2500 sq mm topside copper, 2500 sq mm backside copper, 2500 sq mm board area | 9 | ||
| SOT-23 Measured Thermal Resistance (junction-to-ambient) | θJA | 150 | °C/W | 50 sq mm topside copper, 2500 sq mm backside copper, 2500 sq mm board area | 9 |
CAD (KiCad official)
- Symbol:
LT3014BMPS5#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt3014bmps5-trmpbf-etched.step/lt3014bmps5-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt3014bmps5-trmpbf.step/lt3014bmps5-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
3f214e0c219014d7, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT3014BMPS5#TRMPBF
**Analog Devices** · Pre-ordered Chips · TSOT-23-5
LT3014BMPS5#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Input supply pin, rated for ±80V operating with a 3V to 80V input range, and a 0.1µF to 10µF bypass capacitor is recommended when the device is more than six inches from the input filter. |
| 2 | GND | power_in | Ground reference pin; the GND pin current is the worst-case quiescent current path, reaching 650µA at 20mA load in dropout. |
| 3 | NC | unconnected | No connect pin that may be floated, tied to IN or tied to GND. |
| 4 | ADJ | input | Error amplifier input that servos to 1.22V referenced to ground, is internally clamped to ±7V, and has a 4nA bias current flowing into the pin. |
| 5 | OUT | power_out | Regulated output that requires a minimum 0.47µF output capacitor to prevent oscillations, with the OUT pin rated for ±60V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | | 3 | 3.3 | | V | ILOAD = 20mA | 4 |
| ADJ Pin Voltage | VADJ | 1.2 | 1.22 | 1.24 | V | VIN = 3.3V, ILOAD = 100µA | 4 |
| ADJ Pin Voltage | VADJ | 1.18 | 1.22 | 1.26 | V | 3.3V < VIN < 80V, 100µA < ILOAD < 20mA | 4 |
| Current Limit | | 25 | | | mA | VIN = 3.3V, DVOUT = -0.1V (Note 2) | 4 |
| Input Reverse Leakage Current | | | | 6 | mA | VIN = -80V, VOUT = 0V | 4 |
| Ripple Rejection | | 60 | 70 | | dB | VIN = 7V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 20mA | 4 |
| Line Regulation | | | 1 | 10 | mV | DVIN = 3.3V to 80V, ILOAD = 100µA (Note 2) | 4 |
| Load Regulation | | | 13 | 25 | mV | VIN = 3.3V, DILOAD = 100µA to 20mA (Note 2) | 4 |
| Load Regulation | | | | 40 | mV | VIN = 3.3V, DILOAD = 100µA to 20mA | 4 |
| Dropout Voltage | | | 120 | 180 | mV | VIN = VOUT(NOMINAL), ILOAD = 100µA (Notes 4, 5) | 4 |
| Dropout Voltage | | | | 250 | mV | VIN = VOUT(NOMINAL), ILOAD = 100µA | 4 |
| Dropout Voltage | | | 200 | 270 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA (Notes 4, 5) | 4 |
| Dropout Voltage | | | | 360 | mV | VIN = VOUT(NOMINAL), ILOAD = 1mA | 4 |
| Dropout Voltage | | | 300 | 350 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA (Notes 4, 5) | 4 |
| Dropout Voltage | | | | 450 | mV | VIN = VOUT(NOMINAL), ILOAD = 10mA | 4 |
| Dropout Voltage | | | 350 | 410 | mV | VIN = VOUT(NOMINAL), ILOAD = 20mA (Notes 4, 5) | 4 |
| Dropout Voltage | | | | 570 | mV | VIN = VOUT(NOMINAL), ILOAD = 20mA | 4 |
| GND Pin Current | | | 7 | 20 | µA | VIN = VOUT(NOMINAL), ILOAD = 0mA (Notes 4, 6) | 4 |
| GND Pin Current | | | 12 | 30 | µA | VIN = VOUT(NOMINAL), ILOAD = 100µA (Notes 4, 6) | 4 |
| GND Pin Current | | | 40 | 100 | µA | VIN = VOUT(NOMINAL), ILOAD = 1mA (Notes 4, 6) | 4 |
| GND Pin Current | | | 250 | 450 | µA | VIN = VOUT(NOMINAL), ILOAD = 10mA (Notes 4, 6) | 4 |
| GND Pin Current | | | 650 | 1000 | µA | VIN = VOUT(NOMINAL), ILOAD = 20mA (Notes 4, 6) | 4 |
| Output Voltage Noise | | | 115 | | µVRMS | COUT = 0.47µF, ILOAD = 20mA, BW = 10Hz to 100kHz | 4 |
| ADJ Pin Bias Current | | | 4 | 10 | nA | (Note 7) | 4 |
| Current Limit | | | 70 | | mA | VIN = 7V, VOUT = 0V | 4 |
| Reverse Output Current | | | 2 | 4 | µA | VOUT = 1.22V, VIN < 1.22V (Note 2) | 4 |
| IN Pin Voltage, Operating | | -80 | | 80 | V | | 2 |
| OUT Pin Voltage | | -60 | | 60 | V | | 2 |
| IN to OUT Differential Voltage | | -80 | | 80 | V | | 2 |
| ADJ Pin Voltage | | -7 | | 7 | V | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | ThinSOT package | 2 |
| Operating Junction Temperature Range | | -55 | | 125 | °C | MP-Grade | 2 |
| Thermal Resistance Junction-to-Ambient (θJA) | θJA | | 150 | | °C/W | SOT-23 package, TJMAX = 125°C | 2 |
| Thermal Resistance Junction-to-Case (θJC) | θJC | | 25 | | °C/W | SOT-23 package, measured at pin 2 | 2 |
| SOT-23 Measured Thermal Resistance (junction-to-ambient) | θJA | | 125 | | °C/W | 2500 sq mm topside copper, 2500 sq mm backside copper, 2500 sq mm board area | 9 |
| SOT-23 Measured Thermal Resistance (junction-to-ambient) | θJA | | 150 | | °C/W | 50 sq mm topside copper, 2500 sq mm backside copper, 2500 sq mm board area | 9 |
## CAD (KiCad official)
- Symbol: `LT3014BMPS5#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lt3014bmps5-trmpbf-etched.step` / `lt3014bmps5-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt3014bmps5-trmpbf.step` / `lt3014bmps5-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/3014bfb.pdf) (16 pp, sha256 `3f214e0c219014d7`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt3014bmps5-trmpbf-datasheet.pdf)