main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt3008ets8-3-3-trmpbf: viewers · Ray
lt3008ets8-3-3-trmpbf-etched.glb Publish 0.1.0 · Ray
lt3008ets8-3-3-trmpbf-etched.step lt3008ets8-3-3-trmpbf: factory component page (tier=mfr) · Ray
lt3008ets8-3-3-trmpbf-hero.glb lt3008ets8-3-3-trmpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt3008ets8-3-3-trmpbf-hero.overlay.json Publish 0.1.0 · Ray
lt3008ets8-3-3-trmpbf.glb Publish 0.1.0 · Ray
lt3008ets8-3-3-trmpbf.kicad_mod Publish 0.1.0 · Ray
lt3008ets8-3-3-trmpbf.kicad_sym Publish 0.1.0 · Ray
lt3008ets8-3-3-trmpbf.lbr Publish 0.1.0 · Ray
lt3008ets8-3-3-trmpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LT3008ETS8-3.3#TRMPBF

Analog Devices · Linear Voltage Regulators (LDO) · TSOT-23-8

LT3008ETS8-3.3#TRMPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown input: pulling it low puts the LT3008 into a low-power state and turns the output off, and it must be tied to VIN if unused; it cannot be driven below GND unless tied to IN and does not function if left unconnected.
2 GND power_in Ground; connect the bottom of the output-setting resistor divider directly to GND for the best regulation.
3 GND power_in Ground; connect the bottom of the output-setting resistor divider directly to GND for the best regulation.
4 GND power_in Ground; connect the bottom of the output-setting resistor divider directly to GND for the best regulation.
5 IN power_in Input supply pin; a bypass capacitor in the range of 0.1µF to 10µF is advised when the device is more than six inches from the main input filter capacitor, and the pin withstands reverse voltage without reverse current flow.
6 OUT power_out Regulated output that supplies the load; a minimum output capacitor of 2.2µF is required to prevent oscillations.
7 ADJ/SENSE input For the fixed 3.3V version this is the SENSE input to the error amplifier, best connected to OUT (or to the load for Kelvin sensing) with 1µA typical bias current, and it can be pulled below ground in dual-supply systems.
8 NC unconnected No connect in the TSOT-23 package; not tied to internal circuitry, so it may be floated, tied to VIN, or tied to GND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage 2 45 V 4
Regulated Output Voltage (LT3008-3.3) 3.267 3.3 3.333 V LT3008-3.3: VIN = 3.85V, ILOAD = 100μA 4
Regulated Output Voltage (LT3008-3.3, full operating temperature range) 3.234 3.3 3.366 V 3.85V < VIN < 45V, 1μA < ILOAD < 20mA; l = full operating temperature range 4
Line Regulation (LT3008-3.3) 3.3 16.5 mV ΔVIN = 3.85V to 45V, ILOAD = 1mA; max over l range 4
Load Regulation (LT3008-3.3) 2.2 11 mV VIN = 3.85V, ILOAD = 1μA to 10mA; max over l range 5
Load Regulation (LT3008-3.3) 2.8 28 mV VIN = 3.85V, ILOAD = 1μA to 20mA; max over l range 5
Dropout Voltage 115 180 mV VIN = VOUT(NOMINAL), ILOAD = 100μA 5
Dropout Voltage 250 mV VIN = VOUT(NOMINAL), ILOAD = 100μA; l = full operating temperature range 5
Dropout Voltage 170 250 mV VIN = VOUT(NOMINAL), ILOAD = 1mA 5
Dropout Voltage 350 mV VIN = VOUT(NOMINAL), ILOAD = 1mA; l = full operating temperature range 5
Dropout Voltage 270 340 mV VIN = VOUT(NOMINAL), ILOAD = 10mA 5
Dropout Voltage 470 mV VIN = VOUT(NOMINAL), ILOAD = 10mA; l = full operating temperature range 5
Dropout Voltage 300 365 mV VIN = VOUT(NOMINAL), ILOAD = 20mA 5
Dropout Voltage 500 mV VIN = VOUT(NOMINAL), ILOAD = 20mA; l = full operating temperature range 5
Quiescent Current 3 μA ILOAD = 0μA 5
Quiescent Current 6 μA ILOAD = 0μA; l = full operating temperature range 5
GND Pin Current 3 6 μA VIN = VOUT(NOMINAL) + 0.5V, ILOAD = 0μA; max over l range 5
GND Pin Current 6 12 μA VIN = VOUT(NOMINAL) + 0.5V, ILOAD = 100μA; max over l range 5
GND Pin Current 21 50 μA VIN = VOUT(NOMINAL) + 0.5V, ILOAD = 1mA; max over l range 5
GND Pin Current 160 500 μA VIN = VOUT(NOMINAL) + 0.5V, ILOAD = 10mA; max over l range 5
GND Pin Current 350 1200 μA VIN = VOUT(NOMINAL) + 0.5V, ILOAD = 20mA; max over l range 5
Output Voltage Noise 92 μVRMS COUT = 2.2μF, ILOAD = 20mA, BW = 10Hz to 100kHz 5
Shutdown Threshold (VOUT Off to On) 0.67 1.5 V VOUT = Off to On; l = full operating temperature range 5
Shutdown Threshold (VOUT On to Off) 0.25 0.61 V VOUT = On to Off; l = full operating temperature range 5
SHDN Pin Current 0.65 2 μA VSHDN = 0V, VIN = 45V 5
SHDN Pin Current -1 1 μA VSHDN = 45V, VIN = 45V; l = full operating temperature range 5
Quiescent Current in Shutdown 1 μA VIN = 6V, VSHDN = 0V; l = full operating temperature range 5
Ripple Rejection (LT3008-3.3) 49 61 dB VIN, VOUT = 2V, VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 20mA 5
Current Limit 75 mA VIN = 45V, VOUT = 0 6
Current Limit 22 mA VIN = VOUT(NOMINAL) + 1V, ΔVOUT = -5%; l = full operating temperature range 6
Input Reverse-Leakage Current 1 30 μA VIN = -45V, VOUT = 0; max over l range 6
Reverse-Output Current 0.6 10 μA VOUT = 1.2V, VIN = 0 6
SENSE Pin Bias Current (fixed output versions) 1 μA at the nominal rated output voltage 11
IN Pin Voltage -50 50 V 2
OUT Pin Voltage -50 50 V 2
Input-to-Output Differential Voltage -50 50 V 2
ADJ Pin Voltage -50 50 V 2
SENSE Pin Voltage -50 50 V 2
SHDN Pin Voltage -50 50 V Note 8 2
Operating Junction Temperature Range (E grade) -40 125 °C E grade 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C TS8 package only 2
Thermal Resistance, Junction-to-Ambient (TSOT-23 package) θJA 65 85 °C/W TS8 package; depends on copper area, 2-layer 1 oz FR-4 board (Table 3: 65°C/W at 2500mm² to 85°C/W at 50mm²) 2
Thermal Resistance, Junction-to-Ambient (TSOT-23, 4-layer board with thermal vias) θJA 45 °C/W 4-layer, 1 oz copper PCB, 3 fused TSOT-23 GND pins to inner GND planes 15
Thermal Shutdown Threshold 160 °C 15

CAD (KiCad official)

  • Symbol: LT3008ETS8-3.3#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: lt3008ets8-3-3-trmpbf-etched.step / lt3008ets8-3-3-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt3008ets8-3-3-trmpbf.step / lt3008ets8-3-3-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 1def3249b43dc637, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF