LT1965IMS8E#PBF

{
  "slug": "lt1965ims8e-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Linear Voltage Regulators (LDO), MSOP-8-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management ics",
    "lt1965ims8e#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1965ims8e-pbf.kicad_sym",
    "lt1965ims8e-pbf.kicad_mod",
    "lt1965ims8e-pbf.glb",
    "lt1965ims8e-pbf.step",
    "lt1965ims8e-pbf.lbr",
    "docs/hero.png",
    "docs/lt1965ims8e-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1965ims8e-pbf-hero.glb",
    "lt1965ims8e-pbf-hero.overlay.json",
    "lt1965ims8e-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT1965IMS8E#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-8-EP",
    "pin_count": 9,
    "category": "Power Management ICs",
    "subcategory": "Linear Voltage Regulators (LDO)",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/1965fb.pdf",
    "parts": {
      "symbol": "lt1965ims8e-pbf.kicad_sym",
      "footprint": "lt1965ims8e-pbf.kicad_mod",
      "model_3d": "lt1965ims8e-pbf-hero.glb",
      "model_3d_plain": "lt1965ims8e-pbf-etched.glb",
      "model_3d_step": "lt1965ims8e-pbf-etched.step",
      "model_3d_step_plain": "lt1965ims8e-pbf.step",
      "lbr": "lt1965ims8e-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C459893",
      "digikey": "LT1965IMS8E#PBF-ND",
      "mouser": "584-LT1965IMS8E#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-31T03:26:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT1965IMS8E#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT1965IMS8E#PBF",
        "status": "found",
        "lifecycle": "Restricted Availability"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "OUT",
        "type": "power_out",
        "description": "Output pin that supplies power to the load; a minimum output capacitor of 10µF is required to prevent oscillations."
      },
      {
        "number": "2",
        "name": "OUT",
        "type": "power_out",
        "description": "Output pin that supplies power to the load; a minimum output capacitor of 10µF is required to prevent oscillations."
      },
      {
        "number": "3",
        "name": "SENSE/ADJ",
        "type": "input",
        "description": "On the adjustable LT1965 this is the ADJ error-amplifier input with a 1.20V reference to ground and a typical 1.3µA bias current; on fixed versions (LT1965-1.5/-1.8/-2.5/-3.3) it is the SENSE input, optimally connected to OUT."
      },
      {
        "number": "4",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin; on the adjustable LT1965 the bottom of the output-setting resistor divider connects directly to this pin for optimum regulation."
      },
      {
        "number": "5",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin, tied internally to pin 4 and to the exposed pad and PCB ground."
      },
      {
        "number": "6",
        "name": "SHDN",
        "type": "input",
        "description": "Shutdown pin: pulling it low puts the device into a low-power state and turns the output off, it cannot be driven below GND unless tied to IN, and it should be connected to VIN if unused."
      },
      {
        "number": "7",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that supplies power to the device; a 1µF to 10µF bypass capacitor is required if it is located more than six inches from the main input filter capacitor."
      },
      {
        "number": "8",
        "name": "IN",
        "type": "power_in",
        "description": "Input pin that supplies power to the device; a 1µF to 10µF bypass capacitor is required if it is located more than six inches from the main input filter capacitor."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that must be tied directly to pins 4 and 5 and the PCB ground to provide enhanced thermal performance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pinout taken from the MS8E 8-lead MSOP top-view diagram in the text layer (page 2), which is the pac; The MPN LT1965IMS8E#PBF is the adjustable LT1965 (marking LTCXX, not a -1.5/-1.8/-2.5/-3.3 suffix), ; Pin 9 is the exposed pad, listed by the datasheet as Pin 9 and as ground; it is included as a ninth "
        ],
        "pages_sent": 7,
        "cost_usd": 0.0629,
        "at": "2026-10-31T03:26:28"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/1965fb.pdf",
        "pages": 22,
        "sha256": "070eb5a9c32d091a",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1965ims8e-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "43252be3beac8fd30ca9bfeb82a613fa01d5dffff9b22810c13a4655daafb5ee",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1965ims8e-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          3.0,
          0.96
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4e70485707e66ef47030d9a431936169e0118cb8f103165093989aff05c9acc2",
        "checked": "2026-10-31",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "MS8E",
      "source_page": 18,
      "D": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E1": {
        "nom_mm": 3.0,
        "range_mm": [
          null,
          null
        ]
      },
      "E": {
        "nom_mm": 4.9,
        "range_mm": [
          null,
          null
        ]
      },
      "e": {
        "nom_mm": 0.65,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt1965ims8e-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}