main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt1965ems8e-pbf: viewers · Ray
lt1965ems8e-pbf-etched.glb Publish 0.1.0 · Ray
lt1965ems8e-pbf-etched.step lt1965ems8e-pbf: factory component page (tier=mfr) · Ray
lt1965ems8e-pbf-hero.glb lt1965ems8e-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt1965ems8e-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt1965ems8e-pbf.glb Publish 0.1.0 · Ray
lt1965ems8e-pbf.kicad_mod Publish 0.1.0 · Ray
lt1965ems8e-pbf.kicad_sym Publish 0.1.0 · Ray
lt1965ems8e-pbf.lbr Publish 0.1.0 · Ray
lt1965ems8e-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

LT1965EMS8E#PBF

Analog Devices · Linear Voltage Regulators (LDO) · MSOP-8-EP

LT1965EMS8E#PBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Output pin supplying power to the load; requires a minimum 10µF output capacitor to prevent oscillations.
2 OUT power_out Output pin supplying power to the load; requires a minimum 10µF output capacitor to prevent oscillations (tied internally with pin 1).
3 ADJ input Adjust pin (LT1965 adjustable version) is the error amplifier input, held at 1.20V referenced to ground with typical 1.3µA bias current flowing into the pin.
4 GND power_in Ground; for the adjustable LT1965 connect the bottom of the output-setting resistor divider directly to GND.
5 GND power_in Ground; tie directly to pin 4, the exposed pad and PCB ground.
6 SHDN input Shutdown; pulling low turns the output off (<1µA quiescent), pin current typically less than 5.5µA, connect to VIN if unused, and do not drive below GND unless tied to IN.
7 IN power_in Input supply pin (1.8V to 20V range, ±22V abs max) that needs a 1µF to 10µF bypass capacitor if more than six inches from the main input filter capacitor; withstands reverse voltage.
8 IN power_in Input supply pin (tied internally with pin 7) that needs a 1µF to 10µF bypass capacitor if located far from the main input filter capacitor.
9 EP power_in Exposed pad is ground, must be soldered to the PCB and tied directly to pins 4 and 5 for enhanced thermal performance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8-EP
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
ADJ Pin Voltage VADJ 1.182 1.2 1.218 V VIN = 2.1V, ILOAD = 1mA 4
ADJ Pin Voltage VADJ 1.164 1.2 1.236 V 2.3V < VIN < 20V, 1mA < ILOAD < 1.1A (TJ < 125°C) 4
Line Regulation 3 8 mV LT1965, ΔVIN = 2.1V to 20V, ILOAD = 1mA (E-, I-Grades) 4
Load Regulation 4.25 8 mV LT1965, VIN = 2.3V, ΔILOAD = 1mA to 1.1A 4
Load Regulation 16 mV LT1965, VIN = 2.3V, ΔILOAD = 1mA to 1.1A (TJ < 125°C) 4
Dropout Voltage 0.055 0.08 V ILOAD = 1mA 4
Dropout Voltage 0.14 V ILOAD = 1mA, full temperature range 4
Dropout Voltage 0.12 0.175 V ILOAD = 100mA 4
Dropout Voltage 0.28 V ILOAD = 100mA, full temperature range 4
Dropout Voltage 0.21 0.25 V ILOAD = 500mA 4
Dropout Voltage 0.36 V ILOAD = 500mA, full temperature range 4
Dropout Voltage 0.31 0.36 V ILOAD = 1.1A 4
Dropout Voltage 0.49 V ILOAD = 1.1A (TJ < 125°C) 4
GND Pin Current 0.5 1.1 mA VIN = VOUT(NOMINAL) + 1V, ILOAD = 0mA 4
GND Pin Current 0.6 1.5 mA VIN = VOUT(NOMINAL) + 1V, ILOAD = 1mA 4
GND Pin Current 2.2 5.5 mA VIN = VOUT(NOMINAL) + 1V, ILOAD = 100mA 4
GND Pin Current 8.2 20 mA VIN = VOUT(NOMINAL) + 1V, ILOAD = 500mA 4
GND Pin Current 21 40 mA VIN = VOUT(NOMINAL) + 1V, ILOAD = 1.1A (TJ < 125°C) 4
ADJ Pin Bias Current 1.3 4.5 µA Notes 4, 9 4
Shutdown Threshold (On to Off) 0.2 0.45 V VOUT = On to Off 4
Shutdown Threshold (Off to On) 0.85 2 V VOUT = Off to On 4
SHDN Pin Current 0.01 1 µA VSHDN = 0V 5
SHDN Pin Current 5.5 10 µA VSHDN = 20V 5
Quiescent Current in Shutdown 0.01 1 µA VIN = 6V, VSHDN = 0V 5
Ripple Rejection 57 75 dB VIN, VOUT = 1.5V (AVG), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 0.75A 5
Current Limit 1.2 A VIN = VOUT(NOMINAL) + 1V, ΔVOUT = -0.1V (TJ < 125°C) (Note 6) 5
Current Limit 2.4 A VIN = 7V, VOUT = 0 5
Input Reverse-Leakage Current 1 mA VIN = -20V, VOUT = 0 5
Reverse-Output Current 175 400 µA LT1965 (Note 4), VOUT = 1.2V, VIN = 0 5
Minimum Input Voltage 1.65 V ILOAD = 0.5A 4
Minimum Input Voltage 1.8 2.3 V ILOAD = 1.1A (TJ < 125°C) 4
Output Voltage Noise 40 µVRMS COUT = 10µF, ILOAD = 1.1A, BW = 10Hz to 100kHz 4
IN Pin Voltage -22 22 V 2
OUT Pin Voltage -22 22 V 2
Input to Output Differential Voltage -22 22 V Note 2 2
SENSE Pin Voltage -22 22 V 2
ADJ Pin Voltage -9 9 V 2
SHDN Pin Voltage -22 22 V 2
Operating Junction Temperature Range TJ -40 125 °C E-, I-Grades (Notes 3, 5, 13) 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 125 °C MS8E package 2
Thermal Resistance Junction-to-Ambient θJA 60 °C/W MS8E package 2
Thermal Resistance Junction-to-Case θJC 10 °C/W MS8E package 2

CAD (KiCad official)

  • Symbol: LT1965EMS8E#PBF
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lt1965ems8e-pbf-etched.step / lt1965ems8e-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1965ems8e-pbf.step / lt1965ems8e-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 070eb5a9c32d091a, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF