component
LT1964ES5-SD#TRPBF
Public Made by Adomby adom
Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LT1964ES5-SD#TRPBF
Analog Devices · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LT1964ES5-SD#TRPBF from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator; the SHDN pin thresholds are referenced to this pin. |
| 2 | IN | power_in | Supply input; a 1µF to 10µF bypass capacitor is sufficient and is required if the device is more than six inches from the main input filter capacitor, and the input must stay more positive than OUT, ADJ and SHDN during normal operation. |
| 3 | SHDN | input | Shutdown control referenced to GND: the output is off when pulled within ±0.8V of GND and on when pulled beyond -1.9V or +1.6V, must not be pulled more than 0.5V below IN during a fault, and must be connected to IN if unused. |
| 4 | ADJ | input | Input to the error amplifier, regulated to -1.22V referenced to ground, with a 30nA bias current flowing out of the pin, and it cannot be pulled more negative than IN in normal operation or more than 0.5V more negative than IN during a fault. |
| 5 | OUT | power_out | Regulated output that requires a minimum 1µF output capacitor with ESR of 3Ω or less to prevent oscillation, and it cannot be pulled more negative than IN in normal operation or more than 0.5V below IN during a fault. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Regulated Output Voltage (ADJ Pin Voltage), 25°C | VADJ | -1.202 | -1.22 | -1.238 | V | VIN = -2V, ILOAD = -1mA | 3 |
| ADJ Pin Voltage, full operating temperature range | VADJ | -1.184 | -1.22 | -1.256 | V | -20V < VIN < -2.8V, -200mA < ILOAD < -1mA; full temperature range (l) | 3 |
| Load Regulation, 25°C | 2 | 7 | mV | VIN = -2.8V, ΔILOAD = -1mA to -200mA | 3 | ||
| Load Regulation, full temperature range | 15 | mV | VIN = -2.8V, ΔILOAD = -1mA to -200mA; full temperature range (l) | 3 | |||
| Line Regulation, full temperature range | 12 | mV | ΔVIN = -2.8V to -20V, ILOAD = -1mA (Note 2); full temperature range (l) | 3 | |||
| Dropout Voltage, ILOAD = -1mA, 25°C | 0.1 | 0.15 | V | VIN = VOUT(NOMINAL), ILOAD = -1mA | 3 | ||
| Dropout Voltage, ILOAD = -1mA, full temperature range | 0.19 | V | VIN = VOUT(NOMINAL), ILOAD = -1mA; full temperature range (l) | 3 | |||
| Dropout Voltage, ILOAD = -10mA, 25°C | 0.15 | 0.2 | V | VIN = VOUT(NOMINAL), ILOAD = -10mA | 3 | ||
| Dropout Voltage, ILOAD = -10mA, full temperature range | 0.25 | V | VIN = VOUT(NOMINAL), ILOAD = -10mA; full temperature range (l) | 3 | |||
| Dropout Voltage, ILOAD = -100mA, 25°C | 0.26 | 0.33 | V | VIN = VOUT(NOMINAL), ILOAD = -100mA | 3 | ||
| Dropout Voltage, ILOAD = -100mA, full temperature range | 0.39 | V | VIN = VOUT(NOMINAL), ILOAD = -100mA; full temperature range (l) | 3 | |||
| Dropout Voltage, ILOAD = -200mA, 25°C | 0.34 | 0.42 | V | VIN = VOUT(NOMINAL), ILOAD = -200mA | 3 | ||
| Dropout Voltage, ILOAD = -200mA, full temperature range | 0.49 | V | VIN = VOUT(NOMINAL), ILOAD = -200mA; full temperature range (l) | 3 | |||
| GND Pin Current, ILOAD = 0mA | 30 | 70 | μA | VIN = VOUT(NOMINAL), ILOAD = 0mA (Notes 4, 6) | 3 | ||
| GND Pin Current, ILOAD = -1mA | 85 | 180 | μA | VIN = VOUT(NOMINAL), ILOAD = -1mA (Notes 4, 6) | 3 | ||
| GND Pin Current, ILOAD = -10mA | 300 | 600 | μA | VIN = VOUT(NOMINAL), ILOAD = -10mA (Notes 4, 6) | 3 | ||
| GND Pin Current, ILOAD = -100mA | 1.3 | 3 | mA | VIN = VOUT(NOMINAL), ILOAD = -100mA (Notes 4, 6) | 3 | ||
| GND Pin Current, ILOAD = -200mA | 2.5 | 6 | mA | VIN = VOUT(NOMINAL), ILOAD = -200mA (Notes 4, 6) | 3 | ||
| ADJ Pin Bias Current | 30 | 100 | nA | 4 | |||
| Minimum Input Voltage, LT1964-SD | -1.6 | -2.2 | V | ILOAD = -200mA (Note 12); full temperature range (l) | 4 | ||
| Shutdown Threshold, VOUT = Off to On (Positive) | 0.25 | 0.8 | V | VOUT = Off to On (Positive); full temperature range (l) | 4 | ||
| Shutdown Threshold, VOUT = Off to On (Negative) | -0.25 | -0.8 | V | VOUT = Off to On (Negative); full temperature range (l) | 4 | ||
| Shutdown Threshold, VOUT = On to Off (Positive) | 1.6 | 2.1 | V | VOUT = On to Off (Positive); full temperature range (l) | 4 | ||
| Shutdown Threshold, VOUT = On to Off (Negative) | -1.9 | -2.8 | V | VOUT = On to Off (Negative); full temperature range (l) | 4 | ||
| SHDN Pin Current, VSHDN = 0V | -0.1 | -1 | 0.1 | μA | VSHDN = 0V (Note 8) | 4 | |
| SHDN Pin Current, VSHDN = 15V | 1 | 6 | 15 | μA | VSHDN = 15V (Note 8) | 4 | |
| SHDN Pin Current, VSHDN = -15V | -3 | -9 | μA | VSHDN = -15V (Note 8) | 4 | ||
| Quiescent Current in Shutdown | 3 | 10 | μA | VIN = -6V, VSHDN = 0V; full temperature range (l) | 4 | ||
| Ripple Rejection | 46 | 54 | dB | VIN, VOUT = -1.5V(Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = -200mA | 4 | ||
| Current Limit, full temperature range | 220 | mA | VIN = VOUT(NOMINAL) -1.5V, ΔVOUT = 0.1V; full temperature range (l) | 4 | |||
| Current Limit, 25°C | 350 | mA | VIN = -6V, VOUT = 0V | 4 | |||
| Input Reverse Leakage Current | 1 | mA | VIN = 20V, VOUT, VADJ, VSHDN = Open Circuit; full temperature range (l) | 4 | |||
| Line Regulation, 25°C | 1 | mV | ΔVIN = -2.8V to -20V, ILOAD = -1mA (Note 2) | 3 | |||
| IN Pin Voltage | -20 | 20 | V | 2 | |||
| OUT Pin Voltage | -20 | 20 | V | Note 11 | 2 | ||
| OUT to IN Differential Voltage | -0.5 | 20 | V | Note 11 | 2 | ||
| ADJ Pin Voltage (with respect to IN Pin) | -0.5 | 20 | V | Note 11 | 2 | ||
| SHDN Pin Voltage (with respect to IN Pin) | -0.5 | 35 | V | Note 11 | 2 | ||
| SHDN Pin Voltage (with respect to GND Pin) | -20 | 15 | V | 2 | |||
| Operating Junction Temperature Range (E Grade) | TJ | -40 | 125 | °C | E grade (Note 10) | 2 | |
| Maximum Junction Temperature (SOT-23 S5 package) | TJMAX | 150 | °C | S5 SOT-23 package | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec), SOT-23 Package | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance Junction-to-Ambient, SOT-23 | θJA | 125 | 250 | °C/W | S5 SOT-23 package; depends on board layout (Note 13) | 2 | |
| Thermal Resistance Junction-to-Ambient, SOT-23, Table 1 | θJA | 125 | 150 | °C/W | Still air, 3/32" FR-4, 1 oz copper; device on topside; copper area 50 mm² to 2500 mm² | 13 | |
| Thermal Resistance Junction-to-Case, SOT-23 (Pin 2) | θJC | 60 | °C/W | Measured at Pin 2 | 13 |
CAD (KiCad official)
- Symbol:
LT1964ES5-SD#TRPBF - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
lt1964es5-sd-trpbf-etched.step/lt1964es5-sd-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1964es5-sd-trpbf.step/lt1964es5-sd-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
59b030ab3c07c90b, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1964ES5-SD#TRPBF
**Analog Devices** · Voltage Regulators - Linear, Low Drop Out (LDO) Regulators · SOT-23-5
LT1964ES5-SD#TRPBF from Analog Devices, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground reference for the regulator; the SHDN pin thresholds are referenced to this pin. |
| 2 | IN | power_in | Supply input; a 1µF to 10µF bypass capacitor is sufficient and is required if the device is more than six inches from the main input filter capacitor, and the input must stay more positive than OUT, ADJ and SHDN during normal operation. |
| 3 | SHDN | input | Shutdown control referenced to GND: the output is off when pulled within ±0.8V of GND and on when pulled beyond -1.9V or +1.6V, must not be pulled more than 0.5V below IN during a fault, and must be connected to IN if unused. |
| 4 | ADJ | input | Input to the error amplifier, regulated to -1.22V referenced to ground, with a 30nA bias current flowing out of the pin, and it cannot be pulled more negative than IN in normal operation or more than 0.5V more negative than IN during a fault. |
| 5 | OUT | power_out | Regulated output that requires a minimum 1µF output capacitor with ESR of 3Ω or less to prevent oscillation, and it cannot be pulled more negative than IN in normal operation or more than 0.5V below IN during a fault. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-5 |
| Category | Power Management (PMIC) |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Regulated Output Voltage (ADJ Pin Voltage), 25°C | VADJ | -1.202 | -1.22 | -1.238 | V | VIN = -2V, ILOAD = -1mA | 3 |
| ADJ Pin Voltage, full operating temperature range | VADJ | -1.184 | -1.22 | -1.256 | V | -20V < VIN < -2.8V, -200mA < ILOAD < -1mA; full temperature range (l) | 3 |
| Load Regulation, 25°C | | | 2 | 7 | mV | VIN = -2.8V, ΔILOAD = -1mA to -200mA | 3 |
| Load Regulation, full temperature range | | | | 15 | mV | VIN = -2.8V, ΔILOAD = -1mA to -200mA; full temperature range (l) | 3 |
| Line Regulation, full temperature range | | | | 12 | mV | ΔVIN = -2.8V to -20V, ILOAD = -1mA (Note 2); full temperature range (l) | 3 |
| Dropout Voltage, ILOAD = -1mA, 25°C | | | 0.1 | 0.15 | V | VIN = VOUT(NOMINAL), ILOAD = -1mA | 3 |
| Dropout Voltage, ILOAD = -1mA, full temperature range | | | | 0.19 | V | VIN = VOUT(NOMINAL), ILOAD = -1mA; full temperature range (l) | 3 |
| Dropout Voltage, ILOAD = -10mA, 25°C | | | 0.15 | 0.2 | V | VIN = VOUT(NOMINAL), ILOAD = -10mA | 3 |
| Dropout Voltage, ILOAD = -10mA, full temperature range | | | | 0.25 | V | VIN = VOUT(NOMINAL), ILOAD = -10mA; full temperature range (l) | 3 |
| Dropout Voltage, ILOAD = -100mA, 25°C | | | 0.26 | 0.33 | V | VIN = VOUT(NOMINAL), ILOAD = -100mA | 3 |
| Dropout Voltage, ILOAD = -100mA, full temperature range | | | | 0.39 | V | VIN = VOUT(NOMINAL), ILOAD = -100mA; full temperature range (l) | 3 |
| Dropout Voltage, ILOAD = -200mA, 25°C | | | 0.34 | 0.42 | V | VIN = VOUT(NOMINAL), ILOAD = -200mA | 3 |
| Dropout Voltage, ILOAD = -200mA, full temperature range | | | | 0.49 | V | VIN = VOUT(NOMINAL), ILOAD = -200mA; full temperature range (l) | 3 |
| GND Pin Current, ILOAD = 0mA | | | 30 | 70 | μA | VIN = VOUT(NOMINAL), ILOAD = 0mA (Notes 4, 6) | 3 |
| GND Pin Current, ILOAD = -1mA | | | 85 | 180 | μA | VIN = VOUT(NOMINAL), ILOAD = -1mA (Notes 4, 6) | 3 |
| GND Pin Current, ILOAD = -10mA | | | 300 | 600 | μA | VIN = VOUT(NOMINAL), ILOAD = -10mA (Notes 4, 6) | 3 |
| GND Pin Current, ILOAD = -100mA | | | 1.3 | 3 | mA | VIN = VOUT(NOMINAL), ILOAD = -100mA (Notes 4, 6) | 3 |
| GND Pin Current, ILOAD = -200mA | | | 2.5 | 6 | mA | VIN = VOUT(NOMINAL), ILOAD = -200mA (Notes 4, 6) | 3 |
| ADJ Pin Bias Current | | | 30 | 100 | nA | | 4 |
| Minimum Input Voltage, LT1964-SD | | -1.6 | | -2.2 | V | ILOAD = -200mA (Note 12); full temperature range (l) | 4 |
| Shutdown Threshold, VOUT = Off to On (Positive) | | 0.25 | | 0.8 | V | VOUT = Off to On (Positive); full temperature range (l) | 4 |
| Shutdown Threshold, VOUT = Off to On (Negative) | | -0.25 | | -0.8 | V | VOUT = Off to On (Negative); full temperature range (l) | 4 |
| Shutdown Threshold, VOUT = On to Off (Positive) | | 1.6 | | 2.1 | V | VOUT = On to Off (Positive); full temperature range (l) | 4 |
| Shutdown Threshold, VOUT = On to Off (Negative) | | -1.9 | | -2.8 | V | VOUT = On to Off (Negative); full temperature range (l) | 4 |
| SHDN Pin Current, VSHDN = 0V | | -0.1 | -1 | 0.1 | μA | VSHDN = 0V (Note 8) | 4 |
| SHDN Pin Current, VSHDN = 15V | | 1 | 6 | 15 | μA | VSHDN = 15V (Note 8) | 4 |
| SHDN Pin Current, VSHDN = -15V | | -3 | | -9 | μA | VSHDN = -15V (Note 8) | 4 |
| Quiescent Current in Shutdown | | | 3 | 10 | μA | VIN = -6V, VSHDN = 0V; full temperature range (l) | 4 |
| Ripple Rejection | | 46 | 54 | | dB | VIN, VOUT = -1.5V(Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = -200mA | 4 |
| Current Limit, full temperature range | | 220 | | | mA | VIN = VOUT(NOMINAL) -1.5V, ΔVOUT = 0.1V; full temperature range (l) | 4 |
| Current Limit, 25°C | | | 350 | | mA | VIN = -6V, VOUT = 0V | 4 |
| Input Reverse Leakage Current | | | | 1 | mA | VIN = 20V, VOUT, VADJ, VSHDN = Open Circuit; full temperature range (l) | 4 |
| Line Regulation, 25°C | | | 1 | | mV | ΔVIN = -2.8V to -20V, ILOAD = -1mA (Note 2) | 3 |
| IN Pin Voltage | | -20 | | 20 | V | | 2 |
| OUT Pin Voltage | | -20 | | 20 | V | Note 11 | 2 |
| OUT to IN Differential Voltage | | -0.5 | | 20 | V | Note 11 | 2 |
| ADJ Pin Voltage (with respect to IN Pin) | | -0.5 | | 20 | V | Note 11 | 2 |
| SHDN Pin Voltage (with respect to IN Pin) | | -0.5 | | 35 | V | Note 11 | 2 |
| SHDN Pin Voltage (with respect to GND Pin) | | -20 | | 15 | V | | 2 |
| Operating Junction Temperature Range (E Grade) | TJ | -40 | | 125 | °C | E grade (Note 10) | 2 |
| Maximum Junction Temperature (SOT-23 S5 package) | TJMAX | | | 150 | °C | S5 SOT-23 package | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec), SOT-23 Package | | | | 300 | °C | Soldering, 10 sec | 2 |
| Thermal Resistance Junction-to-Ambient, SOT-23 | θJA | 125 | | 250 | °C/W | S5 SOT-23 package; depends on board layout (Note 13) | 2 |
| Thermal Resistance Junction-to-Ambient, SOT-23, Table 1 | θJA | 125 | | 150 | °C/W | Still air, 3/32" FR-4, 1 oz copper; device on topside; copper area 50 mm² to 2500 mm² | 13 |
| Thermal Resistance Junction-to-Case, SOT-23 (Pin 2) | θJC | | 60 | | °C/W | Measured at Pin 2 | 13 |
## CAD (KiCad official)
- Symbol: `LT1964ES5-SD#TRPBF`
- Footprint: `Package_TO_SOT_SMD:SOT-23-5`
- 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `lt1964es5-sd-trpbf-etched.step` / `lt1964es5-sd-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1964es5-sd-trpbf.step` / `lt1964es5-sd-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588936421667586048) (16 pp, sha256 `59b030ab3c07c90b`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1964es5-sd-trpbf-datasheet.pdf)