LT1964ES5-BYP#TRPBF

{
  "slug": "lt1964es5-byp-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt1964es5-byp#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1964es5-byp-trpbf.kicad_sym",
    "lt1964es5-byp-trpbf.kicad_mod",
    "lt1964es5-byp-trpbf.glb",
    "lt1964es5-byp-trpbf.step",
    "lt1964es5-byp-trpbf.lbr",
    "docs/hero.png",
    "docs/lt1964es5-byp-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1964es5-byp-trpbf-hero.glb",
    "lt1964es5-byp-trpbf-hero.overlay.json",
    "lt1964es5-byp-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT1964ES5-BYP#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "SOT-23-5",
    "pin_count": 5,
    "category": "Power Management (PMIC)",
    "subcategory": "Voltage Regulators - Linear, Low Drop Out (LDO) Regulators",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884518858473472",
    "parts": {
      "symbol": "lt1964es5-byp-trpbf.kicad_sym",
      "footprint": "lt1964es5-byp-trpbf.kicad_mod",
      "model_3d": "lt1964es5-byp-trpbf-hero.glb",
      "model_3d_plain": "lt1964es5-byp-trpbf-etched.glb",
      "model_3d_step": "lt1964es5-byp-trpbf-etched.step",
      "model_3d_step_plain": "lt1964es5-byp-trpbf.step",
      "lbr": "lt1964es5-byp-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C107776",
      "digikey": "505-LT1964ES5-BYP#TRPBFTR-ND",
      "mouser": "584-1964ES5-BYPTRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-19T05:16:07Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT1964ES5-BYP#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-1964ES5-BYPTRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference pin for the regulator; the datasheet gives no further limit for this pin."
      },
      {
        "number": "2",
        "name": "IN",
        "type": "power_in",
        "description": "Supplies power to the device; a bypass capacitor of 1µF to 10µF is sufficient and is required if the device is more than six inches from the main input filter capacitor, and the input supply is specified from -2.8V to -20V for the 200mA minimum-input condition, with the output maximum of -20V."
      },
      {
        "number": "3",
        "name": "BYP",
        "type": "passive",
        "description": "Bypasses the internal reference to lower output voltage noise; a maximum of 0.01µF is recommended (typically 30µVRMS over 10Hz to 100kHz), and the pin must be left unconnected if not used."
      },
      {
        "number": "4",
        "name": "ADJ",
        "type": "input",
        "description": "Input to the error amplifier with a 30nA bias current flowing out of the pin; ADJ is regulated to -1.22V referenced to ground, the output range is -1.22V to -20V, and the pin must not be pulled more negative than IN in normal operation or more than 0.5V more negative than IN during a fault."
      },
      {
        "number": "5",
        "name": "OUT",
        "type": "power_out",
        "description": "Supplies power to the load and requires a minimum 1µF output capacitor (ESR of 3Ω or less recommended) to prevent oscillation; it must not be pulled more negative than IN in normal operation or more than 0.5V below IN during a fault."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin assignment for the BYP variant was taken from the page 2 pin-configuration blocks, whose headers; The LT1964-BYP has no SHDN pin on the package: the datasheet states SHDN is internally tied to VIN f; The datasheet lists TJMAX=150°C in the pin block but the thermal and electrical text uses 125°C for "
        ],
        "pages_sent": 16,
        "cost_usd": 0.1065,
        "at": "2026-10-19T05:11:21"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588884518858473472",
        "pages": 16,
        "sha256": "59b030ab3c07c90b",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 5,
        "described": 5,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1964es5-byp-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "720a6eab0024069bbee68e7cb4c3ff1149468a34611225cdc852662c5d0ec2b7",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1964es5-byp-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.8,
          2.9,
          1.55
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "96f6b0e66319a48efba348103cafdcaf4f705f1b1c838d0a0b019b4cadc0aabe",
        "checked": "2026-10-19",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}