Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
LT1940EFE#PBF
Analog Devices · DC-DC Converters · TSSOP-16-EP
LT1940EFE#PBF from Analog Devices, in a TSSOP-16-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOST1 | input | BOOST pin voltage is rated to 35V for the LT1940 and must stay within 25V above the SW1 pin, with a minimum boost voltage of 2.5V above the switch needed for full saturation. |
| 2 | SW1 | power_out | SW voltage is limited to VIN, and the internal switch has a current limit of 1.8A to 3.2A with a maximum VCESAT of 320mV at 1A. |
| 3 | VIN | power_in | The LT1940 operates from a VIN range of 3.6V to 25V, with an absolute maximum of 25V and a minimum operating voltage of 3.6V. |
| 4 | VIN | power_in | The LT1940 operates from a VIN range of 3.6V to 25V, with an absolute maximum of 25V and a minimum operating voltage of 3.6V. |
| 5 | VIN | power_in | The LT1940 operates from a VIN range of 3.6V to 25V, with an absolute maximum of 25V and a minimum operating voltage of 3.6V. |
| 6 | VIN | power_in | The LT1940 operates from a VIN range of 3.6V to 25V, with an absolute maximum of 25V and a minimum operating voltage of 3.6V. |
| 7 | SW2 | power_out | SW voltage is limited to VIN, and the internal switch has a current limit of 1.8A to 3.2A with a maximum VCESAT of 320mV at 1A. |
| 8 | BOOST2 | input | BOOST pin voltage is rated to 35V for the LT1940 and must stay within 25V above the SW2 pin, with a minimum boost voltage of 2.5V above the switch needed for full saturation. |
| 9 | FB2 | input | The FB pin is rated to 6V absolute maximum, with a feedback voltage of 1.250V typical and an FB pin bias current of 1200nA maximum. |
| 10 | VC2 | passive | The VC pin has a switching threshold of 0.75V and a clamp voltage of 1.8V, with a pin-to-switch-current gain of 2.4A/V. |
| 11 | PG2 | output | The PG pin is rated to 25V for the LT1940, with a power-good output low of 0.4V maximum at 250µA and a leakage of 1µA maximum. |
| 12 | RUN/SS2 | input | The RUN/SS pin is rated to 6V absolute maximum, with a threshold of 0.3V to 0.6V and a source current of 2.3µA. |
| 13 | RUN/SS1 | input | The RUN/SS pin is rated to 6V absolute maximum, with a threshold of 0.3V to 0.6V and a source current of 2.3µA. |
| 14 | PG1 | output | The PG pin is rated to 25V for the LT1940, with a power-good output low of 0.4V maximum at 250µA and a leakage of 1µA maximum. |
| 15 | VC1 | passive | The VC pin has a switching threshold of 0.75V and a clamp voltage of 1.8V, with a pin-to-switch-current gain of 2.4A/V. |
| 16 | FB1 | input | The FB pin is rated to 6V absolute maximum, with a feedback voltage of 1.250V typical and an FB pin bias current of 1200nA maximum. |
| 17 | GND | power_in | The exposed pad is GND and must be soldered to the PCB for thermal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-16-EP |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | 1.23 | 1.25 | 1.27 | V | TA=25C, VIN=5V | 2 | |
| Feedback Voltage | 1.225 | 1.25 | 1.27 | V | 0C to 70C | 2 | |
| Feedback Voltage | 1.215 | 1.25 | 1.27 | V | -40C to 85C | 2 | |
| Minimum Operating Voltage | 3.4 | 3.6 | V | 2 | |||
| Quiescent Current | 3.8 | 4.8 | mA | Not Switching | 2 | ||
| Shutdown Current | 30 | 45 | µA | VRUNSS = 0V | 2 | ||
| FB Pin Bias Current | 240 | 1200 | nA | VFB = 1.25V, VC = 0.4V | 2 | ||
| Reference Line Regulation | 0.005 | %/V | LT1940: VIN 5V to 25V | 2 | |||
| Error Amp GM | 330 | uMhos | 2 | ||||
| Error Amp Voltage Gain | 180 | 2 | |||||
| VC Source Current | 42 | µA | VFB = 1V | 2 | |||
| VC Sink Current | 60 | µA | VFB = 1.5V | 2 | |||
| VC Pin to Switch Current Gain | 2.4 | A/V | 2 | ||||
| VC Switching Threshold | 0.75 | V | 2 | ||||
| VC Clamp Voltage | 1.8 | V | 2 | ||||
| Switching Frequency | 1 | 1.1 | 1.25 | MHz | VFB = 1.1V | 2 | |
| Switching Frequency | 0.95 | 1.1 | 1.35 | MHz | -40C to 85C | 2 | |
| Switching Phase | 150 | 180 | 210 | Deg | 2 | ||
| Maximum Duty Cycle | 78 | 88 | % | Over full operating temperature range | 2 | ||
| Frequency Shift Threshold on FB | 0.5 | V | fSW = 1MHz | 2 | |||
| Foldback Frequency | 150 | kHz | VFB = 0V | 3 | |||
| Switch Current Limit | 1.8 | 2.4 | 3.2 | A | Note 3 | 3 | |
| Switch VCESAT | 210 | 320 | mV | ISW = 1A | 3 | ||
| Switch Leakage Current | 10 | µA | 3 | ||||
| Minimum Boost Voltage Above Switch | 1.8 | 2.5 | V | Note 4, ISW = 1A | 3 | ||
| BOOST Pin Current | 20 | 30 | mA | ISW = 1A | 3 | ||
| RUN/SS Current | 2.3 | µA | 3 | ||||
| RUN/SS Threshold | 0.3 | 0.6 | V | 3 | |||
| PG Threshold Offset | 90 | 125 | 160 | mV | VFB Rising | 3 | |
| PG Voltage Output Low | 0.22 | 0.4 | V | VFB = 1V, IPG = 250µA | 3 | ||
| PG Pin Leakage | 0.1 | 1 | µA | VPG = 2V | 3 | ||
| VIN Voltage | VIN | -0.3 | 25 | V | LT1940 | 2 | |
| BOOST Pin Voltage | 35 | V | LT1940 | 2 | |||
| BOOST Pin Above SW Pin | 25 | V | LT1940 | 2 | |||
| PG Pin Voltage | 25 | V | LT1940 | 2 | |||
| RUN/SS, FB Pins | 6 | V | 2 | ||||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 2 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Junction-to-Ambient Thermal Resistance | θJA | 45 | °C/W | 2 | |||
| Junction-to-Case Thermal Resistance | θJC | 10 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT1940EFE#PBF - Footprint:
Package_SO:TSSOP-16-1EP_4.4x5mm_P0.65mm - 3D model: TSSOP-16-EP (KiCad packages3D, STEP)
- 3D model files:
lt1940efe-pbf-etched.step/lt1940efe-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1940efe-pbf.step/lt1940efe-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
3317ada46f88d605, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).