main
Ray
Publish 0.1.0
e5c2482
LT1932ES6#TRMPBF
Analog Devices · LED Drivers · TSOT-23-6L
LT1932ES6#TRMPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Collector of the internal NPN power switch; minimize the metal trace area connected to this pin to minimize EMI (SW voltage absolute max 36V). |
| 2 | GND | power_in | Ground pin; tie directly to the local ground plane. |
| 3 | LED | passive | Collector of the internal NPN LED switch; connect the cathode of the bottom LED to this pin (absolute max 36V). |
| 4 | RSET | passive | A resistor from this pin to ground programs the LED current (5mA to 40mA); the pin is regulated to 100mV and is also used for LED dimming. |
| 5 | SHDN | input | Shutdown pin; tie higher than 0.85V to turn on the LT1932 and below 0.25V to turn it off. |
| 6 | VIN | power_in | Input supply pin (1V minimum, 10V absolute max); bypass with a capacitor to ground as close to the device as possible. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent Current | IQ | 1.2 | 1.6 | mA | VRSET = 0.2V | 2 | |
| Quiescent Current (shutdown) | IQ | 0.1 | 1 | µA | VSHDN = 0V | 2 | |
| LED Pin Voltage | 120 | 180 | mV | RSET = 1.50k, VIN < VOUT (Figure 1) | 2 | ||
| LED Pin Current | ILED | 33 | 38 | 45 | mA | RSET = 562Ω, VIN = 1.5V | 2 |
| LED Pin Current | ILED | 25 | 30 | 36 | mA | RSET = 750Ω, VIN = 1.2V | 2 |
| LED Pin Current | ILED | 12.5 | 15 | 17.5 | mA | RSET = 1.50k, VIN = 1.2V | 2 |
| Switching Frequency | 0.8 | 1.2 | 1.6 | MHz | VIN = 1V | 2 | |
| Maximum Switch Duty Cycle | 90 | 95 | % | 2 | |||
| Switch Current Limit | 400 | 550 | 780 | mA | 2 | ||
| Switch VCESAT | VCESAT | 150 | 200 | mV | ISW = 300mA | 2 | |
| SHDN Pin Current | 0 | 0.1 | µA | VSHDN = 0V | 2 | ||
| SHDN Pin Current | 15 | 30 | µA | VSHDN = 2V | 2 | ||
| Switch Leakage Current | 0.01 | 5 | µA | Switch Off, VSW = 5V | 2 | ||
| Minimum Input Voltage | 1 | V | 2 | ||||
| RSET Pin Voltage | 100 | mV | RSET = 1.50k | 2 | |||
| LED Pin Current | ILED | 5 | mA | RSET = 4.53k, VIN = 1.2V | 2 | ||
| LED Pin Current Temperature Coefficient | -0.02 | mA/°C | ILED = 15mA | 2 | |||
| Start-Up Threshold (SHDN Pin) | 0.85 | V | 2 | ||||
| Shutdown Threshold (SHDN Pin) | 0.25 | V | 2 | ||||
| VIN Voltage | VIN | 10 | V | 2 | |||
| SHDN Voltage | 10 | V | 2 | ||||
| SW Voltage | 36 | V | 2 | ||||
| LED Voltage | 36 | V | 2 | ||||
| RSET Voltage | 1 | V | 2 | ||||
| Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 2 | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 2 | ||||
| Thermal Resistance Junction to Ambient | θJA | 250 | °C/W | S6 package | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | 6-LEAD PLASTIC SOT-23 Note 1: Absolute Maximum Ratings are those values beyond which the life of | 2 |
CAD (KiCad official)
- Symbol:
LT1932ES6#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
lt1932es6-trmpbf-etched.step/lt1932es6-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1932es6-trmpbf.step/lt1932es6-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
29224ae9f1bb5ee3, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1932ES6#TRMPBF
**Analog Devices** · LED Drivers · TSOT-23-6L
LT1932ES6#TRMPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Collector of the internal NPN power switch; minimize the metal trace area connected to this pin to minimize EMI (SW voltage absolute max 36V). |
| 2 | GND | power_in | Ground pin; tie directly to the local ground plane. |
| 3 | LED | passive | Collector of the internal NPN LED switch; connect the cathode of the bottom LED to this pin (absolute max 36V). |
| 4 | RSET | passive | A resistor from this pin to ground programs the LED current (5mA to 40mA); the pin is regulated to 100mV and is also used for LED dimming. |
| 5 | SHDN | input | Shutdown pin; tie higher than 0.85V to turn on the LT1932 and below 0.25V to turn it off. |
| 6 | VIN | power_in | Input supply pin (1V minimum, 10V absolute max); bypass with a capacitor to ground as close to the device as possible. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Quiescent Current | IQ | | 1.2 | 1.6 | mA | VRSET = 0.2V | 2 |
| Quiescent Current (shutdown) | IQ | | 0.1 | 1 | µA | VSHDN = 0V | 2 |
| LED Pin Voltage | | | 120 | 180 | mV | RSET = 1.50k, VIN < VOUT (Figure 1) | 2 |
| LED Pin Current | ILED | 33 | 38 | 45 | mA | RSET = 562Ω, VIN = 1.5V | 2 |
| LED Pin Current | ILED | 25 | 30 | 36 | mA | RSET = 750Ω, VIN = 1.2V | 2 |
| LED Pin Current | ILED | 12.5 | 15 | 17.5 | mA | RSET = 1.50k, VIN = 1.2V | 2 |
| Switching Frequency | | 0.8 | 1.2 | 1.6 | MHz | VIN = 1V | 2 |
| Maximum Switch Duty Cycle | | 90 | 95 | | % | | 2 |
| Switch Current Limit | | 400 | 550 | 780 | mA | | 2 |
| Switch VCESAT | VCESAT | | 150 | 200 | mV | ISW = 300mA | 2 |
| SHDN Pin Current | | | 0 | 0.1 | µA | VSHDN = 0V | 2 |
| SHDN Pin Current | | | 15 | 30 | µA | VSHDN = 2V | 2 |
| Switch Leakage Current | | | 0.01 | 5 | µA | Switch Off, VSW = 5V | 2 |
| Minimum Input Voltage | | | 1 | | V | | 2 |
| RSET Pin Voltage | | | 100 | | mV | RSET = 1.50k | 2 |
| LED Pin Current | ILED | | 5 | | mA | RSET = 4.53k, VIN = 1.2V | 2 |
| LED Pin Current Temperature Coefficient | | | -0.02 | | mA/°C | ILED = 15mA | 2 |
| Start-Up Threshold (SHDN Pin) | | | 0.85 | | V | | 2 |
| Shutdown Threshold (SHDN Pin) | | | 0.25 | | V | | 2 |
| VIN Voltage | VIN | | | 10 | V | | 2 |
| SHDN Voltage | | | | 10 | V | | 2 |
| SW Voltage | | | | 36 | V | | 2 |
| LED Voltage | | | | 36 | V | | 2 |
| RSET Voltage | | | | 1 | V | | 2 |
| Junction Temperature | TJMAX | | | 125 | °C | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | Note 2 | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 250 | | °C/W | S6 package | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | Abs | | 6-LEAD PLASTIC SOT-23 Note 1: Absolute Maximum Ratings are those values beyond which the life of | 2 |
## CAD (KiCad official)
- Symbol: `LT1932ES6#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files: `lt1932es6-trmpbf-etched.step` / `lt1932es6-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1932es6-trmpbf.step` / `lt1932es6-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/1932f.pdf) (16 pp, sha256 `29224ae9f1bb5ee3`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1932es6-trmpbf-datasheet.pdf)