LT1807CS8#TRPBF from Analog Devices, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT A	output	Channel A rail-to-rail output, swinging within 20mV of either supply rail with 85mA output current and indefinite short-circuit duration.
2	-IN A	input	Channel A inverting input, with input range including both supply rails and input current limited to ±10mA.
3	+IN A	input	Channel A non-inverting input, with input range including both supply rails and input current limited to ±10mA.
4	V-	power_in	Negative supply (or ground in single-supply use); total supply V+ to V- is 2.5V to 12.6V maximum.
5	+IN B	input	Channel B non-inverting input, with input range including both supply rails and input current limited to ±10mA.
6	-IN B	input	Channel B inverting input, with input range including both supply rails and input current limited to ±10mA.
7	OUT B	output	Channel B rail-to-rail output, swinging within 20mV of either supply rail with 85mA output current and indefinite short-circuit duration.
8	V+	power_in	Positive supply; total supply V+ to V- is 2.5V to 12.6V maximum.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SOIC-8
Category	Amplifiers
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Current		-10		10	mA	Note 2	2
Operating Temperature Range		-40		85	°C	Note 4	2
Junction Temperature	TJMAX			150	°C		2
Storage Temperature Range		-65		150	°C		2
Thermal Resistance Junction-to-Ambient, S8 package	θJA			100	°C/W	8-lead plastic SO, Note 9	2
Input Offset Voltage	VOS		100	550	μV	VCM = V+	3
Input Offset Voltage Shift	ΔVOS		50	550	μV	VCM = V- to V+	3
Input Offset Voltage Match (Channel-to-Channel)			200	1000	μV	VCM = V- to V+, Note 10	3
Input Bias Current	IB	-13		-5	μA	VCM = V+	3
Input Bias Current	IB		1	4	μA	VCM = V- + 0.2V	3
Input Offset Current	IOS		0.03	0.6	μA	VCM = V+	3
Input Offset Current	IOS		0.05	1.5	μA	VCM = V- + 0.2V	3
Large-Signal Voltage Gain	AVOL	75	220		V/mV	VS = 5V, VO = 0.5V to 4.5V, RL = 1k to VS/2	3
Large-Signal Voltage Gain	AVOL	9	22		V/mV	VS = 5V, VO = 1V to 4V, RL = 100 to VS/2	3
Large-Signal Voltage Gain	AVOL	60	150		V/mV	VS = 3V, VO = 0.5V to 2.5V, RL = 1k to VS/2	3
Common Mode Rejection Ratio	CMRR	79	100		dB	VS = 5V, VCM = V- to V+	3
Common Mode Rejection Ratio	CMRR	74	95		dB	VS = 3V, VCM = V- to V+	3
Power Supply Rejection Ratio	PSRR	90	105		dB	VS = 2.5V to 10V, VCM = 0V	3
Minimum Supply Voltage			2.3	2.5	V	Note 6	3
Output Voltage Swing Low	VOL		8	50	mV	No Load	3
Output Voltage Swing Low	VOL		50	130	mV	ISINK = 5mA	3
Output Voltage Swing Low	VOL		170	375	mV	ISINK = 25mA	3
Output Voltage Swing High	VOH		15	65	mV	No Load	3
Output Voltage Swing High	VOH		85	180	mV	ISOURCE = 5mA	3
Output Voltage Swing High	VOH		350	650	mV	ISOURCE = 25mA	3
Short-Circuit Current	ISC	35	85		mA	VS = 5V (printed ±)	4
Short-Circuit Current	ISC	30	65		mA	VS = 3V (printed ±)	4
Supply Current per Amplifier	IS		9	13	mA		4
Input Offset Voltage	VOS		200	700	μV	0°C < TA < 70°C, VCM = V+	4
Input Offset Voltage Drift	VOS TC		1.5	5	μV/°C	0°C < TA < 70°C, VCM = V+, Note 8	4
Supply Current per Amplifier	IS		10	14	mA	0°C < TA < 70°C	5
Input Offset Voltage	VOS		100	700	μV	VS = ±5V, VCM = V+	7
Large-Signal Voltage Gain	AVOL	100	300		V/mV	VS = ±5V, VO = -4V to 4V, RL = 1k	7
Large-Signal Voltage Gain	AVOL	10	27		V/mV	VS = ±5V, VO = -2.5V to 2.5V, RL = 100Ω	7
Common Mode Rejection Ratio	CMRR	83	106		dB	VS = ±5V, VCM = V- to V+	8
Power Supply Rejection Ratio	PSRR	90	105		dB	V+ = 2.5V to 10V, V- = 0V	8
Output Voltage Swing Low	VOL		14	60	mV	VS = ±5V, No Load	8
Output Voltage Swing Low	VOL		55	140	mV	VS = ±5V, ISINK = 5mA	8
Output Voltage Swing Low	VOL		180	450	mV	VS = ±5V, ISINK = 25mA	8
Output Voltage Swing High	VOH		20	70	mV	VS = ±5V, No Load	8
Output Voltage Swing High	VOH		90	200	mV	VS = ±5V, ISOURCE = 5mA	8
Output Voltage Swing High	VOH		360	700	mV	VS = ±5V, ISOURCE = 25mA	8
Short-Circuit Current	ISC	40	85		mA	VS = ±5V (printed ±)	8
Supply Current per Amplifier	IS		11	16	mA	VS = ±5V	8
Gain-Bandwidth Product	GBW	170	325		MHz	VS = ±5V, Frequency = 6MHz	8
Slew Rate	SR	70	140		V/μs	VS = ±5V, AV = -1, RL = 1k, VO = ±4V, Measured at VO = ±3V	8
Full-Power Bandwidth	FPBW	5.5			MHz	VS = ±5V, VO = 8VP-P	8
Supply Current per Amplifier	IS		14	20	mA	VS = ±5V, 0°C < TA < 70°C	9

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part	Material	Colour / plating	Datasheet says	Page
contacts	copper		metal attached to the V- pin of the device. θJA is specifi ed for a certain amount of 2oz copper metal trace connecting to the V- pin as described in	11

CAD (KiCad official)

Symbol: LT1807CS8#TRPBF
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SOIC-8 (KiCad packages3D, STEP)
3D model files: lt1807cs8-trpbf-etched.step / lt1807cs8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1807cs8-trpbf.step / lt1807cs8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (28 pp, sha256 469f53cc8ec53d3b, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1807CS8#TRPBF

Verified LT1807CS8#TRPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README