component
LT1804IS8#PBF
Public Made by Adomby adom
Analog Devices Operational Amplifier, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1804IS8#PBF
Analog Devices · Operational Amplifier · SO-8
LT1804IS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Amplifier A output, which swings rail-to-rail (within 20mV of either supply rail) with 42mA typical short-circuit current at VS = 5V. |
| 2 | -IN A | input | Inverting input of amplifier A; the input range includes both supply rails and can be driven beyond the supplies without damage or phase reversal. |
| 3 | +IN A | input | Non-inverting input of amplifier A; the input range includes both supply rails and can be driven beyond the supplies without damage or phase reversal. |
| 4 | V- | power_in | Negative supply (ground in single-supply use); total supply voltage V+ to V- is limited to 12.6V maximum. |
| 5 | +IN B | input | Non-inverting input of amplifier B; the input range includes both supply rails and can be driven beyond the supplies without damage or phase reversal. |
| 6 | -IN B | input | Inverting input of amplifier B; the input range includes both supply rails and can be driven beyond the supplies without damage or phase reversal. |
| 7 | OUT B | output | Amplifier B output, which swings rail-to-rail (within 20mV of either supply rail) with 42mA typical short-circuit current at VS = 5V. |
| 8 | V+ | power_in | Positive supply; total supply voltage V+ to V- is limited to 12.6V maximum, with minimum operating supply of 2.3V typical. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Amplifiers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 0.35 | 2 | mV | TA=25°C, VS=5V,0V, VCM=0V | 3 | |
| Input Offset Voltage | VOS | 1.5 | 8 | mV | TA=25°C, VS=5V,0V, VCM=VS | 3 | |
| Input Offset Shift | ΔVOS | 0.125 | 0.5 | mV | TA=25°C, VCM=0V to VS-2V | 3 | |
| Input Offset Voltage Match (Channel-to-Channel) | 0.5 | 3.5 | mV | TA=25°C, VCM=0V | 3 | ||
| Input Bias Current | IB | 125 | 750 | nA | TA=25°C, VS=5V,0V, VCM=1V | 3 | |
| Input Bias Current | IB | 3 | 5.5 | µA | TA=25°C, VS=5V,0V, VCM=VS | 3 | |
| Input Bias Current Match (Channel-to-Channel) | 100 | 1250 | nA | TA=25°C, VCM=1V | 3 | ||
| Input Offset Current | IOS | 100 | 1000 | nA | TA=25°C, VCM=1V | 3 | |
| Input Offset Current | IOS | 50 | 1000 | nA | TA=25°C, VCM=VS | 3 | |
| Large-Signal Voltage Gain | AVOL | 20 | 60 | V/mV | VS=5V, VO=0.5V to 4.5V, RL=1k to VS/2 | 3 | |
| Large-Signal Voltage Gain | AVOL | 2 | 4.5 | V/mV | VS=5V, VO=1V to 4V, RL=100Ω to VS/2 | 3 | |
| Large-Signal Voltage Gain | AVOL | 15 | 45 | V/mV | VS=3V, VO=0.5V to 2.5V, RL=1k to VS/2 | 3 | |
| Common Mode Rejection Ratio | CMRR | 75 | 96 | dB | VS=5V, VCM=0V to 3V | 3 | |
| Common Mode Rejection Ratio | CMRR | 66 | 90 | dB | VS=3V, VCM=0V to 1V | 3 | |
| Power Supply Rejection Ratio | PSRR | 68 | 90 | dB | VS=2.5V to 10V, VCM=0V | 3 | |
| Minimum Supply Voltage | 2.3 | 2.5 | V | Note 6 | 3 | ||
| Output Voltage Swing Low | VOL | 17 | 60 | mV | No Load | 3 | |
| Output Voltage Swing Low | VOL | 80 | 150 | mV | ISINK=5mA | 3 | |
| Output Voltage Swing Low | VOL | 180 | 300 | mV | ISINK=15mA | 3 | |
| Output Voltage Swing High | VOH | 17 | 60 | mV | No Load | 3 | |
| Output Voltage Swing High | VOH | 125 | 250 | mV | ISOURCE=5mA | 3 | |
| Output Voltage Swing High | VOH | 350 | 600 | mV | ISOURCE=15mA | 3 | |
| Short-Circuit Current | ISC | 20 | 42 | mA | VS=5V | 3 | |
| Short-Circuit Current | ISC | 18 | 34 | mA | VS=3V | 3 | |
| Supply Current per Amplifier | IS | 2.7 | 3 | mA | TA=25°C, VS=5V,0V | 3 | |
| Gain Bandwidth Product | GBW | 50 | 85 | MHz | VS=5V, Frequency=2MHz, RL=1k to 2.5V | 3 | |
| Slew Rate | SR | 65 | 100 | V/µs | VS=5V, AV=-1, RL=1k to VS/2, VO=0.5V to 4.5V, measured at VO=1.5V, 3.5V | 3 | |
| Input Offset Voltage | VOS | 0.35 | 2.5 | mV | TA=25°C, VS=±5V, VCM=-5V | 6 | |
| Input Offset Voltage | VOS | 1.5 | 8 | mV | TA=25°C, VS=±5V, VCM=5V | 6 | |
| Input Bias Current | IB | 125 | 750 | nA | TA=25°C, VS=±5V, VCM=-4V | 6 | |
| Input Bias Current | IB | 2.5 | 5.5 | µA | TA=25°C, VS=±5V, VCM=5V | 6 | |
| Input Offset Current | IOS | 100 | 1000 | nA | TA=25°C, VS=±5V, VCM=-4V | 6 | |
| Large-Signal Voltage Gain | AVOL | 20 | 55 | V/mV | VS=±5V, VO=-4V to 4V, RL=1k | 6 | |
| Common Mode Rejection Ratio | CMRR | 78 | 96 | dB | VS=±5V, VCM=-5V to 3V | 6 | |
| Power Supply Rejection Ratio | PSRR | 68 | 90 | dB | VS+=2.5V to 10V, VS-=0V, VOUT=VS+/2 | 6 | |
| Output Voltage Swing Low | VOL | 17 | 60 | mV | VS=±5V, No Load | 6 | |
| Output Voltage Swing High | VOH | 17 | 60 | mV | VS=±5V, No Load | 6 | |
| Short-Circuit Current | ISC | 25 | 50 | mA | TA=25°C, VS=±5V | 6 | |
| Supply Current per Amplifier | IS | 2.5 | 3 | mA | TA=25°C, VS=±5V | 6 | |
| Input Offset Voltage | VOS | 0.7 | 4 | mV | -40°C≤TA≤85°C, VS=5V,0V, VCM=0V | 5 | |
| Input Bias Current | IB | 200 | 1500 | nA | -40°C≤TA≤85°C, VS=5V,0V, VCM=1V | 5 | |
| Common Mode Rejection Ratio | CMRR | 69 | 95 | dB | -40°C≤TA≤85°C, VS=5V, VCM=0V to 3V | 5 | |
| Power Supply Rejection Ratio | PSRR | 64 | 86 | dB | -40°C≤TA≤85°C, VS=2.5V to 10V, VCM=0V | 5 | |
| Supply Current per Amplifier | IS | 3.1 | 4.25 | mA | -40°C≤TA≤85°C, VS=5V,0V | 5 | |
| Input Offset Voltage | VOS | 1 | 4 | mV | -40°C≤TA≤85°C, VS=±5V, VCM=-5V | 8 | |
| Input Offset Voltage Drift | VOS TC | 10 | 35 | µV/°C | -40°C≤TA≤85°C, VS=±5V (Note 8) | 8 | |
| Input Bias Current | IB | 250 | 1200 | nA | -40°C≤TA≤85°C, VS=±5V, VCM=-4V | 8 | |
| Input Offset Current | IOS | 100 | 1600 | nA | -40°C≤TA≤85°C, VS=±5V, VCM=-4V | 8 | |
| Common Mode Rejection Ratio | CMRR | 73 | 95 | dB | -40°C≤TA≤85°C, VS=±5V, VCM=-5V to 3V | 8 | |
| Power Supply Rejection Ratio | PSRR | 64 | 86 | dB | -40°C≤TA≤85°C, VS+=2.5V to 10V, VS-=0V, VOUT=VS+/2 | 8 | |
| Short-Circuit Current | ISC | 12.5 | 34 | mA | -40°C≤TA≤85°C, VS=±5V | 8 | |
| Supply Current per Amplifier | IS | 2.9 | 4.25 | mA | -40°C≤TA≤85°C, VS=±5V | 8 | |
| Gain Bandwidth Product | GBW | 75 | MHz | -40°C≤TA≤85°C, VS=±5V, Frequency=2MHz, RL=1k | 8 | ||
| Slew Rate | SR | 65 | V/µs | -40°C≤TA≤85°C, VS=±5V, AV=-1, RL=1k, VO=±4V, measured at VO=±2V | 8 | ||
| Total Supply Voltage (V+ to V-) | 12.6 | V | 2 | ||||
| Input Current | -10 | 10 | mA | Note 2 | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 4 | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | S8 package | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 2 | ||||
| Thermal Resistance, Junction to Ambient | θJA | 190 | °C/W | S8 package, 8-lead plastic SO (LT1804) | 2 |
CAD (KiCad official)
- Symbol:
LT1804IS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1804is8-pbf-etched.step/lt1804is8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1804is8-pbf.step/lt1804is8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
13bb514fb73418d9, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).