Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1801CMS8#PBF

Analog Devices · Operational Amplifier · MSOP-8

LT1801CMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, which swings within 20mV of either supply rail with the datasheet's typical loading.
2 -IN A input Inverting input of amplifier A; the inputs can be driven beyond the supplies without damage or phase reversal of the output.
3 +IN A input Non-inverting input of amplifier A; the input common mode range includes both supply rails (0 to VS).
4 V- power_in Negative supply rail; the part operates from 2.3V to 12.6V total supply (single or split supplies), with V- as the lower rail.
5 +IN B input Non-inverting input of amplifier B; the input common mode range includes both supply rails (0 to VS).
6 -IN B input Inverting input of amplifier B; the inputs can be driven beyond the supplies without damage or phase reversal of the output.
7 OUT B output Output of amplifier B, which swings within 20mV of either supply rail with the datasheet's typical loading.
8 V+ power_in Positive supply rail; the total supply voltage (V- to V+) must not exceed 12.6V per the absolute maximum ratings.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Current -10 10 mA Note 2: differential input voltage above 1.4V; input current must be limited 2
Storage Temperature Range -65 150 °C 2
Junction Temperature 150 °C 2
Operating Temperature Range -40 85 °C Note 4 2
Supply voltage (single or split) 2.3 12.6 V Features: low voltage operation 1
Input Offset Voltage (MS8) VOS 140 500 μV VCM = 0V (MS8), TA = 25°C 3
Input Offset Voltage VOS 0.5 3 mV VCM = VS, TA = 25°C 3
Input Offset Shift ΔVOS 20 185 μV VCM = 0V to VS, 1.5V, TA = 25°C 3
Input Bias Current IB 25 250 nA VCM = 1V, TA = 25°C 3
Input Bias Current IB 500 1500 nA VCM = VS, TA = 25°C 3
Input Offset Current IOS 25 200 nA VCM = 1V, TA = 25°C 3
Large-Signal Voltage Gain AVOL 35 85 V/mV VS = 5V, VO = 0.5V to 4.5V, RL = 1k at VS/2, TA = 25°C 3
Large-Signal Voltage Gain AVOL 3.5 8 V/mV VS = 5V, VO = 1V to 4V, RL = 100Ω at VS/2, TA = 25°C 3
Large-Signal Voltage Gain AVOL 30 85 V/mV VS = 3V, VO = 0.5V to 2.5V, RL = 1k at VS/2, TA = 25°C 3
Common Mode Rejection Ratio CMRR 85 105 dB VS = 5V, VCM = 0V to 3.5V, TA = 25°C 3
Common Mode Rejection Ratio CMRR 78 97 dB VS = 3V, VCM = 0V to 1.5V, TA = 25°C 3
Input Common Mode Range 0 V Upper limit printed as VS; TA = 25°C 3
Power Supply Rejection Ratio PSRR 78 97 dB VS = 2.5V to 10V, VCM = 0V, TA = 25°C 3
Minimum Supply Voltage 2.3 2.5 V TA = 25°C 3
Output Voltage Swing Low VOL 16 60 mV No load, TA = 25°C 3
Output Voltage Swing Low VOL 85 200 mV ISINK = 5mA, TA = 25°C 3
Output Voltage Swing Low VOL 225 500 mV ISINK = 20mA, TA = 25°C 3
Output Voltage Swing High VOH 18 60 mV No load, TA = 25°C 3
Output Voltage Swing High VOH 120 250 mV ISOURCE = 5mA, TA = 25°C 3
Output Voltage Swing High VOH 450 800 mV ISOURCE = 20mA, TA = 25°C 3
Short-Circuit Current ISC 20 45 mA VS = 5V, TA = 25°C 3
Short-Circuit Current ISC 20 40 mA VS = 3V, TA = 25°C 3
Supply Current per Amplifier IS 1.6 2 mA TA = 25°C 3
Gain Bandwidth Product GBW 40 80 MHz Frequency = 2MHz, TA = 25°C 3
Slew Rate SR 12.5 25 V/μs VS = 5V, AV = -1, RL = 1k, VO = 1V to 4V, TA = 25°C 3
Input Offset Voltage (MS8) VOS 140 650 μV VCM = 0V (MS8), 0°C to 70°C 4
Input Offset Voltage VOS 0.6 3.5 mV VCM = VS, 0°C to 70°C 4
Input Offset Shift ΔVOS 30 275 μV VCM = 0V to VS, 1.5V, 0°C to 70°C 4
Input Offset Voltage Drift VOS TC 1.5 5 μV/°C 0°C to 70°C; not 100% tested (Note 8) 4
Input Bias Current IB 50 300 nA VCM = 1V, 0°C to 70°C 4
Input Bias Current IB 550 2000 nA VCM = VS, 0.2V, 0°C to 70°C 4
Input Offset Current IOS 25 300 nA VCM = 1V, 0°C to 70°C 4
Large-Signal Voltage Gain AVOL 25 75 V/mV VS = 5V, VO = 0.5V to 4.5V, RL = 1k at VS/2, 0°C to 70°C 4
Large-Signal Voltage Gain AVOL 2.5 6 V/mV VS = 5V, VO = 1V to 4V, RL = 100Ω at VS/2, 0°C to 70°C 4
Large-Signal Voltage Gain AVOL 20 75 V/mV VS = 3V, VO = 0.5V to 2.5V, RL = 1k at VS/2, 0°C to 70°C 4
Common Mode Rejection Ratio CMRR 82 101 dB VS = 5V, VCM = 0V to 3.5V, 0°C to 70°C 4
Common Mode Rejection Ratio CMRR 74 93 dB VS = 3V, VCM = 0V to 1.5V, 0°C to 70°C 4
Power Supply Rejection Ratio PSRR 74 91 dB VS = 2.5V to 10V, VCM = 0V, 0°C to 70°C 4
Minimum Supply Voltage 2.3 2.5 V 0°C to 70°C 4
Output Voltage Swing Low VOL 18 80 mV No load, 0°C to 70°C 4
Output Voltage Swing Low VOL 100 225 mV ISINK = 5mA, 0°C to 70°C 4
Output Voltage Swing Low VOL 300 600 mV ISINK = 20mA, 0°C to 70°C 4
Output Voltage Swing High VOH 25 80 mV No load, 0°C to 70°C 4
Output Voltage Swing High VOH 150 300 mV ISOURCE = 5mA, 0°C to 70°C 4
Output Voltage Swing High VOH 600 950 mV ISOURCE = 20mA, 0°C to 70°C 4
Short-Circuit Current ISC 20 40 mA VS = 5V, 0°C to 70°C 4
Short-Circuit Current ISC 15 30 mA VS = 3V, 0°C to 70°C 4
Supply Current per Amplifier IS 2 2.8 mA 0°C to 70°C 4
Gain Bandwidth Product GBW 35 75 MHz Frequency = 2MHz, 0°C to 70°C 4
Slew Rate SR 11 22 V/μs VS = 5V, AV = -1, RL = 1k, VO = 1V to 4V, 0°C to 70°C 4
Thermal Resistance, Junction-to-Ambient (MS8) θJA 250 °C/W MS8 package, short traces to leads (Note 10) 2

CAD (KiCad official)

  • Symbol: LT1801CMS8#PBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lt1801cms8-pbf-etched.step / lt1801cms8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1801cms8-pbf.step / lt1801cms8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 345100da70f845e5, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF