main
Ray Publish 0.1.0 f30ef95

LT1762EMS8-5#TRPBF

Analog Devices · Linear Voltage Regulators (LDO) · MSOP-8

LT1762EMS8-5#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT power_out Regulated output that supplies the load and requires a minimum 2.2µF output capacitor to prevent oscillations.
2 SENSE input Output sense input to the error amplifier on the fixed-voltage LT1762-5, connected to OUT (or to the load for Kelvin sensing), with 10µA bias current at the nominal output voltage.
3 BYP passive Reference bypass pin, clamped internally to ±0.6V, where a capacitor of up to 0.01µF from OUT lowers noise to 20µVRMS typical; leave unconnected if not used.
4 GND power_in Ground.
5 SHDN input Shutdown input that turns the output off when pulled low; connect to VIN if unused, since the device is in shutdown if the pin is left unconnected.
6 NC unconnected No connect pin.
7 NC unconnected No connect pin.
8 IN power_in Input supply pin, rated ±20V maximum, that tolerates reverse voltage and may need a 1µF to 10µF bypass capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Regulated Output Voltage VOUT 4.95 5 5.05 V LT1762-5, VIN = 5.5V, ILOAD = 1mA 3
Regulated Output Voltage (full temp) VOUT 4.875 5 5.125 V LT1762-5, 6V < VIN < 20V, 1mA < ILOAD < 150mA, over temperature 3
Line Regulation 1 5 mV LT1762-5, ΔVIN = 5.5V to 20V, ILOAD = 1mA, over temperature 3
Load Regulation 9 25 mV LT1762-5, VIN = 6V, ΔILOAD = 1mA to 150mA 3
Load Regulation (full temp) 50 mV LT1762-5, VIN = 6V, ΔILOAD = 1mA to 150mA, over temperature 3
Minimum Operating Voltage 1.8 2.3 V ILOAD = 150mA, over temperature 3
Dropout Voltage 0.09 0.15 V ILOAD = 1mA, VIN = VOUT(NOMINAL) 3
Dropout Voltage (full temp) 0.19 V ILOAD = 1mA, over temperature 3
Dropout Voltage 0.15 0.21 V ILOAD = 10mA, VIN = VOUT(NOMINAL) 3
Dropout Voltage (full temp) 0.25 V ILOAD = 10mA, over temperature 3
Dropout Voltage 0.21 0.27 V ILOAD = 50mA, VIN = VOUT(NOMINAL) 3
Dropout Voltage (full temp) 0.31 V ILOAD = 50mA, over temperature 3
Dropout Voltage 0.27 0.33 V ILOAD = 150mA, VIN = VOUT(NOMINAL) 3
Dropout Voltage (full temp) 0.4 V ILOAD = 150mA, over temperature 3
GND Pin Current 25 65 µA ILOAD = 0mA, VIN = VOUT(NOMINAL), over temperature 3
GND Pin Current 70 120 µA ILOAD = 1mA, VIN = VOUT(NOMINAL), over temperature 3
GND Pin Current 350 500 µA ILOAD = 10mA, VIN = VOUT(NOMINAL), over temperature 3
GND Pin Current 1.3 1.8 mA ILOAD = 50mA, VIN = VOUT(NOMINAL), over temperature 3
GND Pin Current 4 7 mA ILOAD = 150mA, VIN = VOUT(NOMINAL), over temperature 3
Shutdown Threshold (Off to On) 0.8 2 V VOUT = Off to On, over temperature 4
Shutdown Threshold (On to Off) 0.25 0.65 V VOUT = On to Off, over temperature 4
SHDN Pin Current 1 µA VSHDN = 20V 4
Quiescent Current in Shutdown 0.1 1 µA VIN = 6V, VSHDN = 0V 4
Ripple Rejection 50 65 dB VIN, VOUT = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 150mA 4
Current Limit 160 mA VIN = VOUT(NOMINAL) + 1V, ΔVOUT = -0.1V, over temperature 4
Input Reverse Leakage Current 1 mA VIN = -20V, VOUT = 0V, over temperature 4
Reverse Output Current 10 20 µA LT1762-5, VOUT = 5V, VIN < 5V 4
Current Limit (short circuit) 400 mA VIN = 7V, VOUT = 0V 4
Output Voltage Noise 20 µVRMS COUT = 10µF, CBYP = 0.01µF, ILOAD = 150mA, BW = 10Hz to 100kHz 4
IN Pin Voltage -20 20 V 2
OUT Pin Voltage -20 20 V 2
Input to Output Differential Voltage -20 20 V 2
SENSE Pin Voltage -20 20 V 2
BYP Pin Voltage -0.6 0.6 V 2
SHDN Pin Voltage -20 20 V 2
Operating Junction Temperature Range -40 125 °C Note 2 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 150 °C MS8 package 2
Thermal Resistance Junction-to-Ambient θJA 125 °C/W MS8 package 2

CAD (KiCad official)

  • Symbol: LT1762EMS8-5#TRPBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lt1762ems8-5-trpbf-etched.step / lt1762ems8-5-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1762ems8-5-trpbf.step / lt1762ems8-5-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 74e2ca01c993d790, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF