component
LT1719IS6#TRPBF
Public Made by Adomby adom
Analog Devices Comparators, TSOT-23-6L. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LT1719IS6#TRPBF
Analog Devices · Comparators · TSOT-23-6L
LT1719IS6#TRPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Inverting input of the comparator. |
| 2 | V- | power_in | Negative supply, usually grounded. |
| 3 | +IN | input | Noninverting input of the comparator. |
| 4 | V+ | power_in | Positive supply voltage. |
| 5 | OUT | output | Output of the comparator, a rail-to-rail TTL/CMOS compatible output. |
| 6 | SHDN | input | Shutdown control; pull to ground to enable the comparator, and a logic high disables it. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+, V- Supply Voltage (LT1719CS6 Only) | 2.7 | 6 | V | 3 | |||
| VCMR Input Voltage Range lower limit (LT1719S6), printed as V-, 0.1 | VCMR | -0.1 | V | Relative to V- (V-, 0.1 V); Note 2 | 3 | ||
| VCMR Input Voltage Range upper limit (LT1719S6), printed as V+, 1.2 | VCMR | 1.2 | V | Relative to V+ (V+, 1.2 V); Note 2 | 3 | ||
| Input Trip Point VTRIP+ | VTRIP+ | -1.5 | 5.5 | mV | Note 3; l | 3 | |
| Input Trip Point VTRIP- | VTRIP- | -5.5 | 1.5 | mV | Note 3; l | 3 | |
| Input Offset Voltage | VOS | 0.4 | 2.5 | mV | 3 | ||
| Input Offset Voltage (over full operating temperature range) | VOS | 3.5 | mV | Over full operating temperature range (l); Note 3 | 3 | ||
| Input Hysteresis Voltage | VHYST | 2 | 3.5 | 7 | mV | Note 3; l | 3 |
| Input Bias Current | IB | -6 | -2.5 | 0 | μA | l | 3 |
| Input Offset Current | IOS | 0.2 | 0.6 | μA | l | 3 | |
| Common Mode Rejection Ratio (LT1719S6) | CMRR | 55 | 65 | dB | Note 5; l | 3 | |
| Power Supply Rejection Ratio (LT1719S6) | PSRR | 65 | 80 | dB | Note 7; l | 3 | |
| Output High Voltage (LT1719S6), printed as V+, 0.4 | VOH | -0.4 | V | Relative to V+ (V+, 0.4 V); ISOURCE = 4mA, VIN = VTRIP+ + 10mV; l | 3 | ||
| Output Low Voltage | VOL | 0.4 | V | ISINK = 10mA, VIN = VTRIP-, 10mV; l | 3 | ||
| Propagation Delay (20mV overdrive, LT1719S6) | tPD20 | 8 | ns | VOVERDRIVE = 20mV (Note 9); V- = 0V; l | 3 | ||
| Propagation Delay (5mV overdrive, LT1719S6) | tPD5 | 13 | ns | VOVERDRIVE = 5mV (Notes 9, 10); V- = 0V; l | 3 | ||
| Propagation Delay Skew | tSKEW | 0.5 | 1.5 | ns | Note 11 | 3 | |
| Positive Supply Current (LT1719S6), V+ = 5V | I+ | 4.6 | 9 | mA | V+ = 5V; l | 4 | |
| Positive Supply Current (LT1719S6), V+ = 3V | I+ | 4.2 | 7 | mA | V+ = 3V; l | 4 | |
| Shutdown Pin Current at 5V | ISHDN5 | -300 | -110 | -30 | μA | +VS or V+ = 5V; l | 4 |
| Shutdown Pin Current at 3V | ISHDN3 | -200 | -80 | -20 | μA | +VS or V+ = 3V; l | 4 |
| Disabled Supply Current (LT1719S6) | I+S | 7 | 80 | μA | V+ = 6V, VSHDN = +VS, 0.5V; l | 4 | |
| Disabled Supply Current (LT1719S6), shutdown pin open | I+O | 0.2 | 40 | μA | V+ = 6V, Shutdown Pin Open; l | 4 | |
| Absolute Maximum V+ to V- | 7 | V | Note 1 (LT1719S6) | 2 | |||
| Input Current (+IN, -IN or SHDN) | -10 | 10 | mA | 2 | |||
| Output Current (Continuous) | -20 | 20 | mA | 2 | |||
| Operating Temperature Range (I-Grade) | -40 | 85 | °C | I-grade (LT1719IS6) | 2 | ||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec soldering | 2 | |||
| Thermal Resistance Junction-to-Ambient (S6 package) | θJA | 230 | °C/W | S6 package (6-lead TSOT-23) | 2 |
CAD (KiCad official)
- Symbol:
LT1719IS6#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files:
lt1719is6-trpbf-etched.step/lt1719is6-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1719is6-trpbf.step/lt1719is6-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
e13453203db96748, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1719IS6#TRPBF
**Analog Devices** · Comparators · TSOT-23-6L
LT1719IS6#TRPBF from Analog Devices, in a TSOT-23-6L. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | -IN | input | Inverting input of the comparator. |
| 2 | V- | power_in | Negative supply, usually grounded. |
| 3 | +IN | input | Noninverting input of the comparator. |
| 4 | V+ | power_in | Positive supply voltage. |
| 5 | OUT | output | Output of the comparator, a rail-to-rail TTL/CMOS compatible output. |
| 6 | SHDN | input | Shutdown control; pull to ground to enable the comparator, and a logic high disables it. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6L |
| Category | Amplifiers/Comparators |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+, V- Supply Voltage (LT1719CS6 Only) | | 2.7 | | 6 | V | | 3 |
| VCMR Input Voltage Range lower limit (LT1719S6), printed as V-, 0.1 | VCMR | -0.1 | | | V | Relative to V- (V-, 0.1 V); Note 2 | 3 |
| VCMR Input Voltage Range upper limit (LT1719S6), printed as V+, 1.2 | VCMR | | | 1.2 | V | Relative to V+ (V+, 1.2 V); Note 2 | 3 |
| Input Trip Point VTRIP+ | VTRIP+ | -1.5 | | 5.5 | mV | Note 3; l | 3 |
| Input Trip Point VTRIP- | VTRIP- | -5.5 | | 1.5 | mV | Note 3; l | 3 |
| Input Offset Voltage | VOS | | 0.4 | 2.5 | mV | | 3 |
| Input Offset Voltage (over full operating temperature range) | VOS | | | 3.5 | mV | Over full operating temperature range (l); Note 3 | 3 |
| Input Hysteresis Voltage | VHYST | 2 | 3.5 | 7 | mV | Note 3; l | 3 |
| Input Bias Current | IB | -6 | -2.5 | 0 | μA | l | 3 |
| Input Offset Current | IOS | | 0.2 | 0.6 | μA | l | 3 |
| Common Mode Rejection Ratio (LT1719S6) | CMRR | 55 | | 65 | dB | Note 5; l | 3 |
| Power Supply Rejection Ratio (LT1719S6) | PSRR | 65 | | 80 | dB | Note 7; l | 3 |
| Output High Voltage (LT1719S6), printed as V+, 0.4 | VOH | -0.4 | | | V | Relative to V+ (V+, 0.4 V); ISOURCE = 4mA, VIN = VTRIP+ + 10mV; l | 3 |
| Output Low Voltage | VOL | | | 0.4 | V | ISINK = 10mA, VIN = VTRIP-, 10mV; l | 3 |
| Propagation Delay (20mV overdrive, LT1719S6) | tPD20 | | | 8 | ns | VOVERDRIVE = 20mV (Note 9); V- = 0V; l | 3 |
| Propagation Delay (5mV overdrive, LT1719S6) | tPD5 | | | 13 | ns | VOVERDRIVE = 5mV (Notes 9, 10); V- = 0V; l | 3 |
| Propagation Delay Skew | tSKEW | | 0.5 | 1.5 | ns | Note 11 | 3 |
| Positive Supply Current (LT1719S6), V+ = 5V | I+ | | 4.6 | 9 | mA | V+ = 5V; l | 4 |
| Positive Supply Current (LT1719S6), V+ = 3V | I+ | | 4.2 | 7 | mA | V+ = 3V; l | 4 |
| Shutdown Pin Current at 5V | ISHDN5 | -300 | -110 | -30 | μA | +VS or V+ = 5V; l | 4 |
| Shutdown Pin Current at 3V | ISHDN3 | -200 | -80 | -20 | μA | +VS or V+ = 3V; l | 4 |
| Disabled Supply Current (LT1719S6) | I+S | | 7 | 80 | μA | V+ = 6V, VSHDN = +VS, 0.5V; l | 4 |
| Disabled Supply Current (LT1719S6), shutdown pin open | I+O | | 0.2 | 40 | μA | V+ = 6V, Shutdown Pin Open; l | 4 |
| Absolute Maximum V+ to V- | | | | 7 | V | Note 1 (LT1719S6) | 2 |
| Input Current (+IN, -IN or SHDN) | | -10 | | 10 | mA | | 2 |
| Output Current (Continuous) | | -20 | | 20 | mA | | 2 |
| Operating Temperature Range (I-Grade) | | -40 | | 85 | °C | I-grade (LT1719IS6) | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | 10 sec soldering | 2 |
| Thermal Resistance Junction-to-Ambient (S6 package) | θJA | | 230 | | °C/W | S6 package (6-lead TSOT-23) | 2 |
## CAD (KiCad official)
- Symbol: `LT1719IS6#TRPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6L (KiCad packages3D, STEP)
- 3D model files: `lt1719is6-trpbf-etched.step` / `lt1719is6-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1719is6-trpbf.step` / `lt1719is6-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589803149142614017) (22 pp, sha256 `e13453203db96748`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1719is6-trpbf-datasheet.pdf)