LT1716HS5#TRPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT	output	Output swings to within 35mV of V- and 55mV of V+ and can be pulled up to 44V above V- regardless of V+, driving loads connected to a higher supply like an open collector stage.
2	V-	power_in	Negative supply pin; the inputs can be taken 44V above V- and internal resistors protect the inputs for faults up to 5V below V-.
3	+IN	input	Non-inverting input with a common mode range of 0.5V to 44V and the ability to withstand 44V differential and common mode, with protection for faults up to 5V below V-.
4	-IN	input	Inverting input with a common mode range of 0.5V to 44V and the ability to withstand 44V differential and common mode, with protection for faults up to 5V below V-.
5	V+	power_in	Positive supply pin; the part operates from a total supply of 2.7V to 44V and can be shut down by removing V+.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	TSOT-23-5
Category	Operational Amplifier/Comparator
Pins	5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS		300	1600	µV	0.5V < VCM < (VCC, 1V)	5
Input Offset Voltage	VOS			2900	µV	0.5V < VCM < (VCC, 1V), full temperature range	5
Input Offset Voltage Drift				2	µV/°C		5
Input Offset Current	IOS		3	220	nA	VCM = V+/2	5
Input Offset Current	IOS			1.3	µA	VCM = 0V	5
Input Offset Current	IOS			0.9	µA	VCM = 44V	5
Input Bias Current	IB		20	50	nA	VCM = V+/2	5
Input Bias Current	IB			900	nA	VCM = V+/2, full temperature range	5
Input Bias Current	IB		2	25	nA	V+ = 0V, VCM = 44V	5
Input Bias Current	IB		3	14	µA	VCM = 0V	5
Input Bias Current	IB		6		µA	VCM = 44V	5
Input Bias Current	IB		1	1.4	mA	VCM = -5V	5
Input Voltage Range		0.5		44	V		5
Common Mode Rejection Ratio	CMRR	75		110	dB	0.5V < VCM < (V+, 1V)	5
Common Mode Rejection Ratio	CMRR	72		110	dB	0.5V < VCM < 44V (Note 6)	5
Power Supply Rejection Ratio	PSRR	85		110	dB	V- = 0V, VCM = 1.5V, 2.7V < V+ < 36V	5
Minimum Operating Supply Voltage		2.4		2.7	V		5
Large-Signal Voltage Gain	AVOL	200		500	V/mV	RL = 1k, 1V < VOUT < 4V	5
Large-Signal Voltage Gain	AVOL	20			V/mV	RL = 6k	5
Supply Current per Amplifier	IS		35	50	µA	V+ = 3V, RL = Open, VO = High	5
Supply Current per Amplifier	IS			70	µA	V+ = 3V, RL = Open, VO = High, full temperature range	5
Supply Current per Amplifier	IS		35	55	µA	V+ = 5V, RL = Open, VO = High	5
Supply Current per Amplifier	IS			75	µA	V+ = 5V, RL = Open, VO = High, full temperature range	5
Supply Current per Amplifier	IS		40	60	µA	V+ = 12V, RL = Open, VO = High	5
Supply Current per Amplifier	IS			85	µA	V+ = 12V, RL = Open, VO = High, full temperature range	5
Output Sink Current	ISC-	5		10	mA	VOVERDRIVE > 30mV	5
Output Source Current	ISC+	60		110	µA	VOVERDRIVE = 5mV, VOUT = 1V	5
Output Voltage Swing Low (Referred to V-)	VOL	20		60	mV	ISINK = 0mA, VOVERDRIVE = -10mV	5
Output Voltage Swing Low (Referred to V-)	VOL	75		170	mV	ISINK = 0.1mA	5
Output Voltage Swing Low (Referred to V-)	VOL	200		480	mV	ISINK = 1mA	5
Output Voltage Swing Low (Referred to V-)	VOL	550		1200	mV	ISINK = 5mA	5
Output Voltage Swing High (Referred to V+)	VOH	50		110	mV	ISOURCE = 0µA, VOVERDRIVE = -10mV	5
Output Voltage Swing High (Referred to V+)	VOH	130		220	mV	ISOURCE = 10µA	5
Leakage Current			1.7	5	µA	VOUT = 40V, VOVERDRIVE > 100mV	5
Propagation Delay			6	9	µs	VOVERDRIVE > 100mV, RLOAD = 10k	5
Input Voltage Range		-14.5		14	V	Split supply, VS = ±15V, VCM = 0V	6
Supply Current	IS		40	95	µA	VS = ±15V, RL = Open, VO = High	6
Output Sink Current	ISC-	5		10	mA	VOVERDRIVE > 30mV, split supply	6
Absolute Maximum Supply Voltage	V+ to V-			44	V	Supply Voltage (V+ to V-)	2
Absolute Maximum Differential Input Voltage				44	V	Differential Input Voltage	2
Absolute Maximum Input Voltage		-5		44	V	Input Voltage	2
Operating Temperature Range (LT1716H)		-40		125	°C	Operating Temperature Range (Note 3), LT1716H	2
Specified Temperature Range (LT1716H)		-40		125	°C	Specified Temperature Range (Note 4), LT1716H	2
Maximum Junction Temperature	TJMAX			150	°C		2
Storage Temperature Range		-65		150	°C		2
Lead Temperature (Soldering, 10 sec)				300	°C	Soldering, 10 sec	2
Thermal Resistance, Junction to Ambient	θJA		250		°C/W		2

CAD (KiCad official)

Symbol: LT1716HS5#TRPBF
Footprint: Package_TO_SOT_SMD:TSOT-23-5
3D model: TSOT-23-5 (KiCad packages3D, STEP)
3D model files: lt1716hs5-trpbf-etched.step / lt1716hs5-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1716hs5-trpbf.step / lt1716hs5-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (14 pp, sha256 96e2b6f12109bcbb, retrieved 2026-11-02, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1716HS5#TRPBF

Verified LT1716HS5#TRPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README