component
LT1715CMS#TRPBF
Public Made by Adomby adom
Analog Devices Comparators, MSOP-10. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT1715CMS#TRPBF
Analog Devices · Comparators · MSOP-10
LT1715CMS#TRPBF from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN A | input | Noninverting input of comparator A. |
| 2 | -IN A | input | Inverting input of comparator A. |
| 3 | -IN B | input | Inverting input of comparator B. |
| 4 | +IN B | input | Noninverting input of comparator B. |
| 5 | VEE | power_in | Negative supply voltage for the input stage and substrate; VEE must be equal to or less than ground. |
| 6 | GND | power_in | Ground for the output stage. |
| 7 | OUT B | output | Output of comparator B. |
| 8 | OUT A | output | Output of comparator A. |
| 9 | +VS | power_in | Positive supply voltage for the output stage, specified at 2.7V to 6V above GND. |
| 10 | VCC | power_in | Positive supply voltage for the input stage, specified at 2.7V to 12V above VEE. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-10 |
| Category | Operational Amplifier/Comparator |
| Pins | 10 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Trip Points VTRIP+ (LT1715C, LT1715I) | VTRIP+ | -1.5 | 5.5 | mV | 2 | ||
| Input Trip Points VTRIP- (LT1715C, LT1715I) | VTRIP- | -5.5 | 1.5 | mV | 2 | ||
| Input Offset Voltage (LT1715C, LT1715I) | VOS | 0.4 | 2.5 | mV | 3 | ||
| Input Hysteresis Voltage (LT1715C, LT1715I) | VHYST | 2 | 3.5 | 6 | mV | 3 | |
| Input Bias Current (LT1715C, LT1715I) | IB | -6 | -2.5 | 0 | μA | 3 | |
| Input Offset Current (LT1715C, LT1715I) | IOS | 0.2 | 0.6 | μA | 3 | ||
| Common Mode Rejection Ratio (LT1715C, LT1715I) | CMRR | 60 | 70 | dB | Note 7 | 3 | |
| Power Supply Rejection Ratio | PSRR | 65 | 80 | dB | Note 8 | 3 | |
| Output Low Voltage | VOL | 0.4 | V | ISINK = 10mA, VIN = VTRIP- - 20mV | 3 | ||
| Propagation Delay (VCC=5V, VEE=-5V, LT1715C, LT1715I) | tPD20 | 2.8 | 4 | 6 | ns | VOVERDRIVE = 20mV (Note 11), VCC = 5V, VEE = -5V | 3 |
| Propagation Delay (VCC=3V, VEE=0V, LT1715C, LT1715I) | tPD20 | 3 | 4.8 | 6.5 | ns | VOVERDRIVE = 20mV, VCC = 3V, VEE = 0V | 3 |
| Propagation Delay skew | tSKEW | 0.5 | 1.5 | ns | Between tPD+/tPD-, VEE = 0V (Note 13) | 3 | |
| Differential Propagation Delay between channels | ΔtPD | 0.3 | 1 | ns | Between channels (Note 14) | 3 | |
| Propagation Delay at 5mV overdrive | tPD5 | 6 | 9 | ns | VOVERDRIVE = 5mV, VEE = 0V (Notes 11, 12) | 3 | |
| Positive Input Stage Supply Current per comparator (5V, LT1715C, LT1715I) | ICC | 12 | mA | +VS = VCC = 5V, VEE = -5V | 3 | ||
| Positive Input Stage Supply Current per comparator (3V, LT1715C, LT1715I) | ICC | 0.9 | 1.6 | mA | +VS = VCC = 3V, VEE = 0V | 3 | |
| Negative Input Stage Supply Current per comparator (5V, LT1715C, LT1715I) | IEE | -4.8 | -2.9 | mA | +VS = VCC = 5V, VEE = -5V | 3 | |
| Negative Input Stage Supply Current per comparator (3V, LT1715C, LT1715I) | IEE | -3.8 | -2.4 | mA | +VS = VCC = 3V, VEE = 0V | 3 | |
| Positive Output Stage Supply Current per comparator (5V, LT1715C, LT1715I) | IS | 4.6 | 7.5 | mA | +VS = VCC = 5V, VEE = -5V | 3 | |
| Positive Output Stage Supply Current per comparator (3V, LT1715C, LT1715I) | IS | 3.7 | 6 | mA | VS = VCC = 3V, VEE = 0V | 3 | |
| Supply Voltage VCC - VEE | VCC - VEE | 2.7 | 12 | V | Input Supply Voltage | 2 | |
| Output Supply Voltage +VS | +VS | 2.7 | 6 | V | Output Supply Voltage | 2 | |
| Absolute Maximum Supply Voltage +VS to GND | +VS | 7 | V | +VS to GND | 2 | ||
| Absolute Maximum Supply Voltage VCC to VEE | VCC-VEE | 13.2 | V | VCC to VEE | 2 | ||
| Absolute Maximum Supply Voltage +VS to VEE | +VS-VEE | 13.2 | V | +VS to VEE | 2 | ||
| Absolute Maximum VEE to GND | VEE | -13.2 | 0.3 | V | VEE to GND | 2 | |
| Input Current | IIN | -10 | 10 | mA | +IN, -IN | 2 | |
| Output Current (Continuous) | IOUT | -20 | 20 | mA | Continuous | 2 | |
| Operating Temperature Range LT1715C | TA | -40 | 85 | °C | LT1715C | 2 | |
| Specified Temperature Range LT1715C | TA | 0 | 70 | °C | LT1715C (Note 3) | 2 | |
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature | TLEAD | 300 | °C | Soldering, 10 sec | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 120 | °C/W | Note 4 | 2 | ||
| Voltage Offset Drift | VOS/ΔT | 10 | μV/°C | Over full operating temperature range (l) | 3 | ||
| Maximum Toggle Frequency | fMAX | 150 | MHz | Note 10 | 3 | ||
| Output Rise Time | tr | 2 | ns | 10% to 90% | 3 | ||
| Output Fall Time | tf | 2 | ns | 90% to 10% | 3 | ||
| Output Timing Jitter tPD+ | tJITTER | 15 | psRMS | VIN = 1.2VP-P (6dBm), ZIN = 50, f = 20MHz (Note 15) | 3 | ||
| Output Timing Jitter tPD- | tJITTER | 11 | psRMS | VIN = 1.2VP-P (6dBm), ZIN = 50, f = 20MHz (Note 15) | 3 | ||
| Propagation Delay at 20mV overdrive, VEE=0V | tPD20 | 4.4 | ns | VOVERDRIVE = 20mV, VCC = 5V, VEE = 0V | 3 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | metal attached to Pin 5 of the device. θJA is specifi ed for a 2500mm2 3/32" FR-4 board covered with 2oz copper on both sides and with 100mm2 of | 4 |
CAD (KiCad official)
- Symbol:
LT1715CMS#TRPBF - Footprint:
Package_SO:MSOP-10_3x3mm_P0.5mm - 3D model: MSOP-10 (KiCad packages3D, STEP)
- 3D model files:
lt1715cms-trpbf-etched.step/lt1715cms-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1715cms-trpbf.step/lt1715cms-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
c95c7bfdbafe25d0, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).