Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1638IS8#PBF

Analog Devices · Operational Amplifier · SO-8

LT1638IS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUT A output Output of amplifier A, which swings within 20mV of the positive rail and within 3mV of the negative rail with no load and sources or sinks at least 25mA.
2 -IN A input Inverting input of amplifier A, protected by an internal 1k series resistor and diode for excursions up to 2V below V-, with a maximum differential input voltage of 44V.
3 +IN A input Non-inverting input of amplifier A, whose common-mode range includes both supplies and which can operate up to 44V above V- regardless of V+.
4 V- power_in Negative supply pin; total supply voltage (V+ to V-) is specified from 2.5V to 44V, with reverse battery protection up to 18V.
5 +IN B input Non-inverting input of amplifier B, whose common-mode range includes both supplies and which can operate up to 44V above V- regardless of V+.
6 -IN B input Inverting input of amplifier B, protected by an internal 1k series resistor and diode for excursions up to 2V below V-, with a maximum differential input voltage of 44V.
7 OUT B output Output of amplifier B, which swings within 20mV of the positive rail and within 3mV of the negative rail with no load and sources or sinks at least 25mA.
8 V+ power_in Positive supply pin, which should be bypassed with about 0.1µF within an inch of the pin; total supply voltage (V+ to V-) is specified from 2.5V to 44V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage (LT1638 N, S packages), TA = 25°C, 3V/5V VOS 200 600 μV LT1638 N, S Packages; TA = 25°C 4
Input Offset Voltage (LT1638 N, S packages), 3V/5V VOS 950 μV LT1638 N, S Packages; -40°C ≤ TA ≤ 85°C 4
Input Offset Voltage Drift (N, S packages) VOS drift 2 6 μV/°C LT1638/LT1639 N, S Packages; Note 9 (not 100% tested) 4
Input Voltage Range, 3V/5V VCM 0 44 V VS = 3V, 0V; VS = 5V, 0V 4
Common Mode Rejection Ratio CMRR 88 98 dB VCM = 0V to VCC, 1V 4
Common Mode Rejection Ratio CMRR 80 88 dB VCM = 0V to 44V (Note 8); -40°C ≤ TA ≤ 85°C 4
Large-Signal Voltage Gain, VS = 3V, TA = 25°C AVOL 200 1500 V/mV VS = 3V, VO = 500mV to 2.5V, RL = 10k; TA = 25°C 4
Large-Signal Voltage Gain, VS = 3V AVOL 100 V/mV VS = 3V, VO = 500mV to 2.5V, RL = 10k; -40°C ≤ TA ≤ 85°C 4
Large-Signal Voltage Gain, VS = 5V, TA = 25°C AVOL 400 1500 V/mV VS = 5V, VO = 500mV to 4.5V, RL = 10k; TA = 25°C 4
Large-Signal Voltage Gain, VS = 5V AVOL 200 V/mV VS = 5V, VO = 500mV to 4.5V, RL = 10k; -40°C ≤ TA ≤ 85°C 4
Output Voltage Swing Low, 3V No Load VOL 3 8 mV VS = 3V, No Load 4
Output Voltage Swing Low, 3V ISINK 5mA VOL 250 450 mV VS = 3V, ISINK = 5mA 4
Output Voltage Swing Low, 5V No Load VOL 3 8 mV VS = 5V, No Load 4
Output Voltage Swing Low, 5V ISINK 10mA VOL 500 700 mV VS = 5V, ISINK = 10mA 4
Output Voltage Swing High, 3V No Load VOH 2.94 2.98 V VS = 3V, No Load 4
Output Voltage Swing High, 3V ISOURCE 5mA VOH 2.25 2.4 V VS = 3V, ISOURCE = 5mA 4
Output Voltage Swing High, 5V No Load VOH 4.94 4.98 V VS = 5V, No Load 4
Output Voltage Swing High, 5V ISOURCE 10mA VOH 3.8 4 V VS = 5V, ISOURCE = 10mA 4
Short-Circuit Current, 3V short to GND ISC 10 15 mA VS = 3V, Short to GND (Note 2) 4
Short-Circuit Current, 3V short to VCC ISC 15 25 mA VS = 3V, Short to VCC (Note 2) 4
Short-Circuit Current, 5V short to GND ISC 15 20 mA VS = 5V, Short to GND (Note 2) 4
Short-Circuit Current, 5V short to VCC ISC 15 25 mA VS = 5V, Short to VCC (Note 2) 4
Power Supply Rejection Ratio, 3V to 12.5V PSRR 90 100 dB VS = 3V to 12.5V, VCM = VO = 1V 5
Minimum Operating Supply Voltage 2.4 2.7 V 5
Supply Current per Amplifier, 25°C IS 170 230 μA Note 6 5
Supply Current per Amplifier, -40°C to 85°C IS 275 μA Note 6; -40°C ≤ TA ≤ 85°C 5
Gain Bandwidth Product, 3V, TA = 25°C GBW 650 1075 kHz f = 5kHz; TA = 25°C (Note 5) 5
Gain Bandwidth Product, 3V GBW 500 kHz f = 5kHz; -40°C ≤ TA ≤ 85°C (Note 5) 5
Slew Rate, 3V/5V, TA = 25°C SR 0.21 0.38 V/μs AV = -1, RL = ∞; TA = 25°C (Note 7) 5
Slew Rate, 3V/5V SR 0.17 V/μs AV = -1, RL = ∞; -40°C ≤ TA ≤ 85°C (Note 7) 5
Input Offset Voltage (LT1638 N, S packages), TA = 25°C, ±15V VOS 250 800 μV LT1638 N, S Packages; VS = ±15V; TA = 25°C 5
Input Offset Voltage (LT1638 N, S packages), ±15V VOS 1100 μV LT1638 N, S Packages; VS = ±15V; -40°C ≤ TA ≤ 85°C 5
Input Offset Current, ±15V IOS 1 6 nA 6
Input Bias Current, ±15V IB 20 50 nA 5
Input Voltage Range, ±15V VCM -15 29 V VS = ±15V 5
Common Mode Rejection Ratio, ±15V CMRR 80 88 dB VCM = -15V to 29V 5
Large-Signal Voltage Gain, ±15V, TA = 25°C AVOL 200 500 V/mV VS = ±15V, VO = ±14V, RL = 10k; TA = 25°C 5
Large-Signal Voltage Gain, ±15V AVOL 100 V/mV VS = ±15V, VO = ±14V, RL = 10k; -40°C ≤ TA ≤ 85°C 5
Output Voltage Swing, No Load, ±15V VO 14.9 14.95 V VS = ±15V, No Load 5
Output Voltage Swing, IOUT = ±10mA, ±15V VO 13.7 14 V VS = ±15V, IOUT = ±10mA 5
Power Supply Rejection Ratio, ±15V PSRR 90 100 dB VS = ±1.5V to ±22V 6
Supply Current per Amplifier, ±15V, TA = 25°C IS 205 280 μA VS = ±15V; TA = 25°C 6
Supply Current per Amplifier, ±15V IS 350 μA VS = ±15V; -40°C ≤ TA ≤ 85°C 6
Gain Bandwidth Product, ±15V, TA = 25°C GBW 750 1200 kHz f = 5kHz; VS = ±15V; TA = 25°C 6
Gain Bandwidth Product, ±15V GBW 600 kHz f = 5kHz; VS = ±15V; -40°C ≤ TA ≤ 85°C 6
Slew Rate, ±15V, TA = 25°C SR 0.225 0.4 V/μs AV = -1, RL = ∞, VO = ±10V; TA = 25°C 6
Slew Rate, ±15V SR 0.18 V/μs AV = -1, RL = ∞, VO = ±10V; -40°C ≤ TA ≤ 85°C 6
Input Current II -25 25 mA 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (Soldering) TLEAD 300 °C 10 sec 2
Specified / Operating Temperature Range (I grade) TA -40 85 °C LT1638I/LT1639I 2
Thermal Resistance, junction to ambient (S8 package) θJA 190 °C/W S8 package; TJMAX = 150°C 2

CAD (KiCad official)

  • Symbol: LT1638IS8#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1638is8-pbf-etched.step / lt1638is8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1638is8-pbf.step / lt1638is8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 a1ec4ee3eafecefc, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF