LT1636HS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	NULL	passive	Input offset null pin; a 10k potentiometer between pins 1 and 8 with its wiper to V- nulls the offset by at least ±1mV.
2	-IN	input	Inverting input; accepts 44V differential and common mode, operates up to 44V above V- regardless of V+, and is protected by an internal 1k series resistor to 22V below V-.
3	+IN	input	Non-inverting input; accepts 44V differential and common mode, operates up to 44V above V- regardless of V+, and is protected by an internal 1k series resistor to 22V below V-.
4	V-	power_in	Negative supply (ground in single-supply use); total supply V+ to V- is 2.7V to 44V, and it should be bypassed with about 0.01µF when using split supplies.
5	SHDN	input	Shutdown pin; taking it 1.2V above V- reduces supply current to about 4µA and makes the output high impedance, and it can be taken up to 32V above V-.
6	OUT	output	Rail-to-rail output that drives 18mA, is unity-gain stable for capacitive loads up to 10,000pF with a 0.22µF and 150Ω compensation network, and can be pulled up to 27V beyond V+ with less than 1nA leakage when V+ is less than 0.5V.
7	V+	power_in	Positive supply; total supply V+ to V- is 2.7V to 44V maximum 44V, protected against reverse battery up to 27V, and should be bypassed with about 0.01µF within an inch of the pin.
8	NULL	passive	Input offset null pin; a 10k potentiometer between pins 1 and 8 with its wiper to V- nulls the offset by at least ±1mV.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SO-8
Category	Amplifiers
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Total Supply Voltage	V+ to V-			44	V		2
Input Differential Voltage				44	V		2
Input Current		-25		25	mA		2
Shutdown Pin Voltage Above V-				32	V		2
Shutdown Pin Current		-10		10	mA		2
Operating Temperature Range		-40		125	°C	LT1636H	2
Junction Temperature	TJMAX			150	°C		2
Storage Temperature Range		-65		150	°C		2
Lead Temperature				300	°C	Soldering, 10 sec	2
Thermal Resistance Junction-Ambient	θJA			190	°C/W	S8 package	2
Input Offset Voltage	VOS		50	325	µV	VS = 3V, 0V; 5V, 0V	5
Input Offset Voltage (full temp)	VOS			3	mV	VS = 3V, 0V; 5V, 0V; -40°C to 125°C	5
Input Offset Voltage Drift			3	10	µV/°C	VS = 3V, 0V; 5V, 0V	5
Input Offset Current	IOS			3	nA	VS = 3V, 0V; 5V, 0V	5
Input Offset Current	IOS			1	µA	VCM = 44V (Note 5)	5
Input Bias Current	IB			30	nA	VS = 3V, 0V; 5V, 0V	5
Input Bias Current	IB			10	µA	VCM = 44V (Note 5)	5
Input Voltage Range		0.3		44	V		5
Common Mode Rejection Ratio	CMRR	72			dB	VCM = 0.3V to VCC, 1V (Note 5)	5
Common Mode Rejection Ratio	CMRR	74			dB	VCM = 0.3V to 44V	5
Large-Signal Voltage Gain	AVOL	200	1300		V/mV	VS = 3V, VO = 500mV to 2.5V, RL = 10k	5
Large-Signal Voltage Gain (full temp)	AVOL	20			V/mV	VS = 3V, VO = 500mV to 2.5V, RL = 10k	5
Large-Signal Voltage Gain	AVOL	400	2000		V/mV	VS = 5V, VO = 500mV to 4.5V, RL = 10k	5
Large-Signal Voltage Gain (full temp)	AVOL	35			V/mV	VS = 5V, VO = 500mV to 4.5V, RL = 10k	5
Output Voltage Swing LOW	VOL			15	mV	No Load	5
Output Voltage Swing LOW	VOL			875	mV	ISINK = 2.5mA	5
Output Voltage Swing HIGH	VOH	2.925			V	VS = 3V, No Load	5
Output Voltage Swing HIGH	VOH	2.35			V	VS = 3V, ISOURCE = 5mA	5
Output Voltage Swing HIGH	VOH	4.925			V	VS = 5V, No Load	5
Output Voltage Swing HIGH	VOH	4.1			V	VS = 5V, ISOURCE = 10mA	5
Power Supply Rejection Ratio	PSRR	80			dB	VS = 2.7V to 12.5V, VCM = VO = 1V	5
Minimum Supply Voltage				2.7	V		5
Reverse Supply Voltage		25			V	IS = -100µA	6
Supply Current	IS		42	55	µA	VS = 3V, 0V; 5V, 0V (Note 6)	6
Supply Current (full temp)	IS			75	µA	VS = 3V, 0V; 5V, 0V (Note 6)	6
Supply Current, SHDN				15	µA	VPIN5 = 2V, No Load (Note 6)	6
Shutdown Pin Current	ISD			200	nA	VPIN5 = 0.3V, No Load (Note 6)	6
Shutdown Pin Current	ISD			7	µA	VPIN5 = 2V, No Load (Note 5)	6
Output Leakage Current, SHDN				5	µA	VPIN5 = 2V, No Load (Note 6)	6
Maximum Shutdown Pin Current				200	µA	VPIN5 = 32V, No Load (Note 5)	6
Gain Bandwidth Product	GBW	110	200		kHz	f = 1kHz (Note 5)	6
Gain Bandwidth Product (full temp)	GBW	60			kHz	f = 1kHz (Note 5)	6
Slew Rate	SR	0.035	0.07		V/µs	AV = -1, RL = ∞ (Note 7)	6
Slew Rate (full temp)	SR	0.015			V/µs	AV = -1, RL = ∞ (Note 7)	6
Input Offset Voltage	VOS		100	550	µV	VS = ±15V	6
Input Offset Voltage (full temp)	VOS			3.4	mV	VS = ±15V	6
Input Offset Voltage Drift			3	11	µV/°C	VS = ±15V	6
Input Offset Current	IOS			5	nA	VS = ±15V	6
Input Bias Current	IB			50	nA	VS = ±15V	6
Common Mode Rejection Ratio	CMRR	72			dB	VCM = -14.7V to 29V	6
Large-Signal Voltage Gain	AVOL	100	500		V/mV	VO = ±14V, RL = 10k	6
Large-Signal Voltage Gain (full temp)	AVOL	4			V/mV	VO = ±14V, RL = 10k	6
Output Voltage Swing	VO	14.8			V	No Load; printed ±14.8	6
Output Voltage Swing	VO	14.3			V	IOUT = ±2.5mA; printed ±14.3	6
Power Supply Rejection Ratio	PSRR	84			dB	VS = ±1.35V to ±22V	6
Minimum Supply Voltage				1.35	V	printed ±1.35V	6
Supply Current	IS		50	70	µA	VS = ±15V	6
Supply Current (full temp)	IS			100	µA	VS = ±15V	6
Positive Supply Current, SHDN				40	µA	VPIN5 = -20V, VS = ±22V, No Load	6
Shutdown Pin Current	ISHDN			10	µA	VPIN5 = -20V, VS = ±22V, No Load	6
Output Leakage Current, SHDN				100	µA	VPIN5 = -20V, VS = ±22V, No Load	6
Shutdown Pin Input Low Voltage	VL			-21.7	V	VS = ±22V	6
Shutdown Pin Input High Voltage	VH	-20			V	VS = ±22V	6
Gain Bandwidth Product	GBW	125	220		kHz	f = 1kHz	6
Gain Bandwidth Product (full temp)	GBW	75			kHz	f = 1kHz	6

CAD (KiCad official)

Symbol: LT1636HS8#PBF
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)
3D model files: lt1636hs8-pbf-etched.step / lt1636hs8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1636hs8-pbf.step / lt1636hs8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (16 pp, sha256 c1cff2013cd2e27e, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1636HS8#PBF

Verified LT1636HS8#PBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README