component
LT1619EMS8#PBF
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
Generated by kicad-footprint-generator · KiCad file format 20260206
| Name | Last updated |
|---|---|
| docs | 10d ago |
| viewers | 10d ago |
| lt1619ems8-pbf-etched.glb | 10d ago |
| lt1619ems8-pbf-etched.step | 10d ago |
| lt1619ems8-pbf-hero.glb | 10d ago |
| lt1619ems8-pbf-hero.overlay.json | 10d ago |
| lt1619ems8-pbf.glb | 10d ago |
| lt1619ems8-pbf.kicad_mod | 10d ago |
| lt1619ems8-pbf.kicad_sym | 10d ago |
| lt1619ems8-pbf.lbr | 10d ago |
| lt1619ems8-pbf.step | 10d ago |
| package.json | 10d ago |
| page.json | 10d ago |
| README.md | 10d ago |
| verification.json | 10d ago |
LT1619EMS8#PBF
Analog Devices · Pre-ordered Chips · MSOP-8
LT1619EMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | S/S | input | Shutdown/synchronization pin with an absolute maximum of -0.3V to 20V, a shutdown threshold of 0.45V to 1.2V, and external synchronization of the oscillator up to 500kHz. |
| 2 | FB | input | Feedback pin where the 1.22V to 1.26V reference voltage is measured, with an absolute maximum of VIN. |
| 3 | VC | passive | Compensation voltage pin with an absolute maximum of 3V. |
| 4 | GND | power_in | Ground pin of the device. |
| 5 | SENSE | input | Current sense input with an absolute range of -0.5V to VIN, where the current limit threshold is 40mV to 66mV (53mV typical). |
| 6 | GATE | output | Gate drive output for an external low side N-channel MOSFET, rated for a gate drive output current of ±1.5A absolute maximum (1A rail-to-rail driver). |
| 7 | DRV | power_in | Gate driver supply pin with an absolute maximum of -0.3V to 20V, operating from the input in nonbootstrapped mode or from the output in bootstrapped operation. |
| 8 | VIN | power_in | Input supply pin with an absolute maximum of -0.3V to 20V and an operating input voltage range of 1.9V to 18V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage (VIN) | VIN | -0.3 | 20 | V | 2 | ||
| Gate Drive Supply Voltage (DRV) | DRV | -0.3 | 20 | V | 2 | ||
| Shutdown/Synch Voltage (S/S) | S/S | -0.3 | 20 | V | 2 | ||
| Compensation Voltage (VC) | VC | 3 | V | 2 | |||
| Gate Drive Output Current (GATE) | GATE | -1.5 | 1.5 | A | Printed as ±1.5A | 2 | |
| Current Sense Voltage (SENSE) | SENSE | -0.5 | V | Printed upper limit is VIN (not numeric) | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 2: LT1619E guaranteed to meet specifications 0°C to 70°C | 2 | ||
| Junction Temperature | 125 | °C | Note 3 | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec soldering | 2 | |||
| Thermal resistance junction to ambient, MS8 MSOP package | θJA | 200 | °C/W | TJMAX = 125°C; assigned to MS8 package, see review | 2 | ||
| Reference Voltage | 1.22 | 1.24 | 1.26 | V | Measured at the FB Pin; full operating temperature range (●) | 2 | |
| Reference Line Regulation | 0.004 | 0.05 | %/V | 1.9V ≤ VIN ≤ 18V | 2 | ||
| FB Input Bias Current | 10 | 25 | nA | VFB = VREF | 2 | ||
| Error Amplifier Transconductance | 80 | 170 | 260 | µΩ-1 | 2 | ||
| Error Amplifier Output Source Current | 4 | 8.7 | 14 | µA | VFB = 1V, VCOMP = 1V | 2 | |
| Error Amplifier Output Sink Current | 4 | 8.7 | 14 | µA | VFB = 1.5V, VCOMP = 1V | 2 | |
| Error Amplifier Clamp Voltage | 1.6 | 2.2 | V | VFB = 1V | 2 | ||
| Undervoltage Lockout Threshold | 1.65 | 1.85 | V | 2 | |||
| Input Voltage Range | 1.9 | 18 | V | full operating temperature range (●) | 2 | ||
| Switching Frequency | 220 | 300 | 360 | kHz | 1.9V ≤ VIN ≤ 18V; full operating temperature range (●) | 2 | |
| Synchronization Frequency Range | 370 | 500 | kHz | 2 | |||
| Maximum Duty Cycle | 88 | 92 | % | full operating temperature range (●) | 2 | ||
| Current Limit Threshold | 40 | 53 | 66 | mV | full operating temperature range (●) | 2 | |
| Current Sense Input Current | -90 | -120 | -150 | µA | VSENSE = 0V; full operating temperature range (●) | 3 | |
| Driver Output Low Level | 100 | 200 | mV | IOUT = 20mA | 3 | ||
| Driver Output Low Level | 0.5 | 0.7 | V | IOUT = 200mA | 3 | ||
| Shutdown Driver Output Level | 100 | 200 | mV | VS/S = 0V, IOUT = 20mA | 3 | ||
| Idle Mode Driver Output Level | 100 | 200 | mV | VS/S = VIN, VFB = 1.5V, IOUT = 20mA | 3 | ||
| Quiescent Supply Current | 140 | 220 | µA | VS/S = VIN, VFB = 1.5V; full operating temperature range (●) | 3 | ||
| Shutdown Supply Current | 15 | 19 | µA | VS/S = 0V | 3 | ||
| Shutdown Threshold | 0.45 | 1.2 | V | 3 | |||
| Shutdown Delay | 12 | 17 | 33 | µs | 3 |
CAD (KiCad official)
- Symbol:
LT1619EMS8#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt1619ems8-pbf-etched.step/lt1619ems8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1619ems8-pbf.step/lt1619ems8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
3c0b9f5368bd50e1, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).