main
Ray Publish 0.1.0 c2e7ab2

LT1618EDD#TRPBF

Analog Devices · DC-DC Converters · DFN-10-EP(3x3)

LT1618EDD#TRPBF from Analog Devices, in a DFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB input Feedback pin that sets the output voltage via R1/R2 divider against the 1.263V reference (R1 = R2(VOUT/1.263 - 1)).
2 ISN input Current sense (-) pin, the inverting input to the current sense amplifier.
3 ISP input Current sense (+) pin, the noninverting input to the current sense amplifier.
4 IADJ input Current sense adjust pin; a DC voltage applied reduces the current sense voltage, tie to ground if not needed and do not leave floating.
5 GND power_in Ground pin, tie directly to the local ground plane.
6 SW passive Switch pin for the DD package, connect this pin to pin 7.
7 SW passive Collector of the internal NPN power switch; minimize the metal trace area connected to it to minimize EMI (36V max).
8 VIN power_in Input supply pin (1.6V to 18V), bypass with a capacitor to ground as close to the device as possible.
9 SHDN input Shutdown pin; tie higher than 1V to turn on the LT1618, below 0.3V to turn it off.
10 VC passive Compensation pin for the error amplifier; connect a series RC to ground, typically 2kΩ and 10nF.
11 Exposed Pad power_in Exposed pad is GND and must be soldered to the PCB GND for optimum thermal performance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-10-EP(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 1.6 18 V 2
Quiescent Current IQ 1.8 2.7 mA VSHDN = 1.6V, Not Switching 2
Quiescent Current (shutdown) IQ 0.1 1 µA VSHDN = 0V 2
Reference Voltage VFB 1.25 1.263 1.276 V Measured at FB Pin 2
Reference Voltage (full temp range) VFB 1.243 1.263 1.283 V Measured at FB Pin, over full operating temperature range 2
Reference Voltage Line Regulation 0.01 0.03 %/V 1.6V < VIN < 18V 2
FB Pin Bias Current -12 12 nA VFB = 1.263V, VIN = 1.8V, over full temperature range (typ ±2) 2
Current Sense Voltage (ISP, ISN) 47.5 50 52.5 mV VFB = 0V, VIADJ = 0V, over full temperature range 2
ISP, ISN Pin Bias Currents 50 80 µA VISP = 1.85V, VISN = 1.80V, VIADJ = 0V 2
Switching Frequency 1.25 1.4 1.6 MHz VFB = 1V 2
Maximum Switch Duty Cycle 88 92 % over full temperature range 2
Switch Current Limit 1.5 2.1 2.8 A Note 4 2
Switch VCESAT VCESAT 200 260 mV ISW = 1A (Note 4) 3
Switch Leakage Current 0.01 5 µA Switch Off, VSW = 5V 3
SHDN Pin Current 5 20 µA VSHDN = 1.6V 3
Error Amplifier Voltage Gain 180 V/V 2
Error Amplifier Transconductance 160 µmho ∆IC = ± 5µA 2
Error Amplifier Sink Current 15 µA VFB = 1.35V, VC = 1V 2
Error Amplifier Source Current 30 µA VFB = 1.10V, VC = 1V 2
ISP, ISN Common Mode Minimum Voltage 1.8 V 2
Switching Frequency (foldback) 550 kHz VFB = 0V 2
Shutdown Threshold (SHDN Pin) 0.3 V 3
Start-Up Threshold (SHDN Pin) 1 V 3
VIN, SHDN Voltage 18 V 2
SW Voltage 36 V 2
ISP, ISN Voltage 36 V 2
IADJ Voltage 6 V 2
FB Voltage 1.5 V 2
VC Voltage 1.5 V 2
Junction Temperature TJ 125 °C 2
Operating Temperature Range -40 85 °C Note 2 2
Storage Temperature Range (DFN) -65 125 °C DFN 2
Thermal Resistance Junction-Ambient θJA 43 °C/W DD package, TJMAX = 125°C 2
Thermal Resistance Junction-Case θJC 3 °C/W DD package, TJMAX = 125°C 2

CAD (KiCad official)

  • Symbol: LT1618EDD#TRPBF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: DFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt1618edd-trpbf-etched.step / lt1618edd-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1618edd-trpbf.step / lt1618edd-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 afff43abca3e3fd7, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF