LT1495CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT A	output	Amplifier A output, rail-to-rail, sources and sinks 500µA load current with short-circuit current of 0.7mA min typical-limit at 5V.
2	-IN A	input	Amplifier A inverting input, rail-to-rail with input range -0.3V to 36V and 250pA typical bias current.
3	+IN A	input	Amplifier A non-inverting input, rail-to-rail with Over-The-Top operation above V+ up to 36V.
4	V-	power_in	Negative supply (ground in single-supply use); total supply V+ to V- is 2.2V to 36V and reverse battery protected to 18V.
5	+IN B	input	Amplifier B non-inverting input, rail-to-rail with Over-The-Top operation above V+ up to 36V.
6	-IN B	input	Amplifier B inverting input, rail-to-rail with input range -0.3V to 36V and 250pA typical bias current.
7	OUT B	output	Amplifier B output, rail-to-rail, sources and sinks 500µA load current.
8	V+	power_in	Positive supply; total supply V+ to V- is 2.2V to 36V maximum 36V, with supply current of 1.5µA max per amplifier at 25°C.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SO-8
Category	Operational Amplifier/Comparator
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS		150	375	µV	VS = 5V, TA = 25°C	3
Input Offset Voltage	VOS		200	475	µV	VS = 3V, TA = 25°C	3
Input Bias Current	IB		250	1000	pA	TA = 25°C, VS = 5V, 0V (Note 5)	3
Input Bias Current	IB		180	360	nA	VCM = 10V (Note 6), TA = 25°C	3
Input Offset Current	IOS		20	100	pA	TA = 25°C (Note 5)	3
Large-Signal Voltage Gain	AVOL	100	500		V/mV	VS = 5V, VO = 0.25V to 4.5V, RL = 100k, TA = 25°C	3
Large-Signal Voltage Gain	AVOL	50	250		V/mV	VS = 3V, VO = 0.25V to 2.5V, RL = 100k, TA = 25°C	3
Input Voltage Range		0		36	V	TA = 25°C	3
Common Mode Rejection Ratio	CMRR	90	106		dB	VCM = 0V to 4V, VS = 5V, TA = 25°C	3
Common Mode Rejection Ratio	CMRR	74	95		dB	VCM = 0V to 10V, VS = 5V, TA = 25°C	3
Power Supply Rejection Ratio	PSRR	90	99		dB	VS = 2.2V to 12V, VCM = VO = 0.5V, TA = 25°C	3
Minimum Operating Supply Voltage			2.1	2.2	V	TA = 25°C	3
Output Voltage Swing LOW	VOL		50	100	mV	No Load, TA = 25°C	3
Output Voltage Swing LOW	VOL		210	410	mV	ISINK = 100µA, TA = 25°C	3
Short-Circuit Current	ISC	0.7	1.3		mA	TA = 25°C (Note 5)	3
Supply Current per Amplifier	IS		1	1.5	µA	TA = 25°C (Note 6)	3
Reverse Supply Voltage		-18			V	IS = 10µA per Amplifier	3
Slew Rate	SR	0.4	1		V/ms	AV = -1, VS = ±5V	3
Input Noise Voltage			4		µVP-P	0.1Hz to 10Hz	3
Input Noise Voltage Density	en		185		nV/√Hz	f = 100Hz	3
Input Noise Current Density	in		10		fA/√Hz	f = 100Hz	3
Gain Bandwidth Product	GBW		2.7		kHz	f = 100Hz	3
Input Offset Voltage	VOS		175	425	µV	VS = 5V, 0°C ≤ TA ≤ 70°C	4
Input Offset Voltage	VOS		225	525	µV	VS = 3V, 0°C ≤ TA ≤ 70°C	4
Input Offset Voltage Drift	VOS TC		0.4	2	µV/°C	(Note 4), 0°C ≤ TA ≤ 70°C	4
Input Bias Current	IB		250	1200	pA	(Note 5), 0°C ≤ TA ≤ 70°C	4
Input Offset Current	IOS		20	120	pA	(Note 5), 0°C ≤ TA ≤ 70°C	4
Large-Signal Voltage Gain	AVOL	75	280		V/mV	VS = 5V, VO = 0.25V to 4.5V, RL = 100k, 0°C ≤ TA ≤ 70°C	4
Common Mode Rejection Ratio	CMRR	89	106		dB	VCM = 0.2V to 4V, VS = 5V, 0°C ≤ TA ≤ 70°C	4
Power Supply Rejection Ratio	PSRR	89	99		dB	VS = 2.4V to 12V, VCM = VO = 0.5V, 0°C ≤ TA ≤ 70°C	4
Minimum Operating Supply Voltage			2.3	2.4	V	0°C ≤ TA ≤ 70°C	4
Output Voltage Swing LOW	VOL		55	110	mV	No Load, 0°C ≤ TA ≤ 70°C	4
Short-Circuit Current	ISC	0.6	1.1		mA	(Note 5), 0°C ≤ TA ≤ 70°C	4
Supply Current per Amplifier	IS		1.2	1.8	µA	(Note 6), 0°C ≤ TA ≤ 70°C	4
Input Offset Voltage	VOS		200	575	µV	VS = ±15V, VCM = VO = 0V, TA = 25°C	5
Input Bias Current	IB		25	1000	pA	VS = ±15V, TA = 25°C	5
Input Offset Current	IOS		20	100	pA	VS = ±15V, TA = 25°C	5
Large-Signal Voltage Gain	AVOL	100	360		V/mV	VO = ±10V, RL = 100k, VS = ±15V, TA = 25°C	5
Common Mode Rejection Ratio	CMRR	100	120		dB	VCM = -15V to 14V, VS = ±15V, TA = 25°C	5
Power Supply Rejection Ratio	PSRR	96	120		dB	VS = ±5V to ±15V, TA = 25°C	5
Output Voltage Swing LOW	VOL	-14.85	-14.7		V	RL = 1M, VS = ±15V, TA = 25°C	5
Output Voltage Swing LOW	VOL	-14.75	-14.5		V	RL = 100k, VS = ±15V, TA = 25°C	5
Output Voltage Swing HIGH	VOH	14.78	14.89		V	RL = 1M, VS = ±15V, TA = 25°C	5
Output Voltage Swing HIGH	VOH	14.62	14.81		V	RL = 100k, VS = ±15V, TA = 25°C	5
Short-Circuit Current	ISC	0.7	1.5		mA	VS = ±15V, TA = 25°C	5
Supply Current per Amplifier	IS		1.4	2	µA	VS = ±15V, TA = 25°C	5
Input Offset Voltage	VOS		225	625	µV	VS = ±15V, 0°C ≤ TA ≤ 70°C	6
Input Bias Current	IB		250	1200	pA	VS = ±15V, 0°C ≤ TA ≤ 70°C	6
Input Offset Current	IOS		20	120	pA	VS = ±15V, 0°C ≤ TA ≤ 70°C	6
Large-Signal Voltage Gain	AVOL	60	240		V/mV	VO = ±10V, RL = 100k, VS = ±15V, 0°C ≤ TA ≤ 70°C	6
Common Mode Rejection Ratio	CMRR	98	120		dB	VCM = -14.8V to 14V, VS = ±15V, 0°C ≤ TA ≤ 70°C	6
Power Supply Rejection Ratio	PSRR	94	120		dB	VS = ±5V to ±15V, 0°C ≤ TA ≤ 70°C	6
Supply Current per Amplifier	IS		1.6	2.4	µA	VS = ±15V, 0°C ≤ TA ≤ 70°C	6
Total Supply Voltage (V+ to V-)				36	V		2
Differential Input Voltage				36	V		2
Input Current		-10		10	mA		2
Operating Temperature Range		-40		85	°C	LT1495C	2
Specified Temperature Range		-40		85	°C	LT1495C (Note 3: guaranteed 0°C to 70°C)	2
Storage Temperature Range		-65		150	°C		2
Junction Temperature	TJMAX			150	°C		2
Lead Temperature (Soldering, 10 sec)				300	°C		2
Thermal Resistance Junction to Ambient	θJA		190		°C/W	S8 package	2

CAD (KiCad official)

Symbol: LT1495CS8#PBF
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)
3D model files: lt1495cs8-pbf-etched.step / lt1495cs8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1495cs8-pbf.step / lt1495cs8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (16 pp, sha256 061ae1e62b8b2377, retrieved 2026-10-31, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1495CS8#PBF

Verified LT1495CS8#PBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README