Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1461DHS8-5#PBF

Analog Devices · Voltage References · SO-8

LT1461DHS8-5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Do not connect.
2 VIN power_in Supply input, (VOUT + 0.3V) ≤ VIN ≤ 20V, with a bypass capacitor (1µF typical) required.
3 SHDN input Shutdown control: part operates normally with the pin open or ≥2.4V, and is shut down when pulled low (logic low ≤0.8V).
4 GND power_in Ground.
5 DNC unconnected Do not connect.
6 VOUT power_out Reference voltage output, sources at least 50mA and requires an output capacitor of 1µF for light loads or 2µF or greater for higher loads.
7 DNC unconnected Do not connect.
8 DNC unconnected Do not connect.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy VOUT -0.15 0.15 % LT1461DHS8, TA = 25°C 3
Output Voltage Temperature Coefficient TC 7 20 ppm/°C LT1461DHS8, over specified temperature range 3
Line Regulation 15 50 ppm/V LT1461DHS8, (VOUT + 0.5V) ≤ VIN ≤ 20V 4
Load Regulation Sourcing 50 ppm/mA LT1461DHS8, 0 ≤ IOUT ≤ 10mA, VIN = VOUT + 2.5V 4
Dropout Voltage VIN, VOUT 0.06 0.3 V VOUT Error = 0.1%, IOUT = 0mA 4
Dropout Voltage VIN, VOUT 0.13 0.4 V VOUT Error = 0.1%, IOUT = 1mA 4
Dropout Voltage VIN, VOUT 0.2 V VOUT Error = 0.1%, IOUT = 10mA 4
Shutdown Pin Logic High Input Voltage 2.4 V 4
Shutdown Logic High Input Current 2 15 µA Pin 3 = 2.4V 4
Shutdown Logic Low Input Voltage 0.5 0.8 V 4
Shutdown Logic Low Input Current 4 µA Pin 3 = 0.8V 4
Supply Current 35 50 µA No Load 4
Shutdown Current 25 35 µA RL = 1k 4
Output Short-Circuit Current 100 mA Short VOUT to GND 4
Output Voltage Noise 8 ppmP-P 0.1Hz ≤ f ≤ 10Hz 4
Output Voltage Noise 9.6 ppmRMS 10Hz ≤ f ≤ 1kHz 4
Long-Term Drift of Output Voltage 60 ppm/√kHr SO-8 Package 4
Thermal Hysteresis 120 ppm ∆T = -40°C to 125°C 4
Input Voltage VIN 20 V 2
Operating Temperature Range -40 125 °C 2
Storage Temperature Range -65 150 °C 2
Specified Temperature Range -40 125 °C High grade 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance Junction to Ambient θJA 190 °C/W S8 package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC to PC board stress because of the small amount of plastic 11

CAD (KiCad official)

  • Symbol: LT1461DHS8-5#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1461dhs8-5-pbf-etched.step / lt1461dhs8-5-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1461dhs8-5-pbf.step / lt1461dhs8-5-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (18 pp, sha256 dcc2277edeb5e99d, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF