main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt1431cs8-pbf: viewers · Ray
lt1431cs8-pbf-etched.glb Publish 0.1.0 · Ray
lt1431cs8-pbf-etched.step lt1431cs8-pbf: factory component page (tier=mfr) · Ray
lt1431cs8-pbf-hero.glb lt1431cs8-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt1431cs8-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt1431cs8-pbf.glb Publish 0.1.0 · Ray
lt1431cs8-pbf.kicad_mod Publish 0.1.0 · Ray
lt1431cs8-pbf.kicad_sym Publish 0.1.0 · Ray
lt1431cs8-pbf.lbr Publish 0.1.0 · Ray
lt1431cs8-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray

LT1431CS8#PBF

Analog Devices · Voltage References · SO-8

LT1431CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 COLLECTOR output Open collector of the output transistor with a 36V maximum pin voltage and approximately 1V saturation voltage at 100mA.
2 COMP input Base of the output transistor driver for additional compensation or regulator shutdown, must be left open if unused, absolute maximum 6V.
3 V+ power_in Bias voltage for the entire shunt regulator with 36V maximum, minimum to operate equal to VREF (2.5V), and typical quiescent current of 0.6mA.
4 RTOP passive Top of the on-chip 5k-5k resistive divider, tied to COLL for self-contained 5V operation, may be left open if unused, absolute maximum 6V.
5 GND-S power_in Ground sense reference for the on-chip divider and shunt regulator circuitry except the output transistor, allowing external current limit with one resistor between GND-F and GND-S.
6 GND-F power_in Ground force: emitter of the output transistor and substrate connection for the die, with GND-F to GND-S limited to 0.7V.
7 RMID passive Middle of the on-chip resistive divider string between RTOP and GND-S, tied to REF for self-contained 5V operation, may be left open if unused, absolute maximum 6V.
8 REF input Control pin of the shunt regulator with a 2.5V threshold, input bias current typically 0.2µA when V+ > 3V, absolute maximum 6V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Voltage (over full operating temperature range) VREF 2.49 2.5 2.51 V VKA = 5V, IK = 2mA, (Note 3); l = full operating temperature range 3
Reference Voltage (25°C) VREF 2.48 2.5 2.52 V VKA = 5V, IK = 2mA, (Note 3); TA = 25°C 3
Collector Current Limit ILIM 100 260 mA VKA = VREF + 50mV; l 3
5V Reference Output 4.95 5 5.05 V Internal Divider Used, IK = 2mA 3
Minimum Operating Current IMIN 0.6 1 mA VKA = VREF to 36V 3
Off-State Collector Leakage Current /ILEAK/ 1 2 µA VCOLL = 36V, V+ = 5V, VREF = 2.4V; l 3
Off-State Cathode Current /IOFF/ 1 2 µA VKA = 36V, VREF = 0V; l 3
Reference Input Current (25°C) /IREF/ 0.2 1 µA VKA = 5V, TA = 25°C 3
Reference Input Current (over full operating temperature range) /IREF/ 1.2 µA VKA = 5V, TA = 25°C; l 3
Voltage Ratio, Reference to Cathode (Open-Loop Gain) ∆VREF/∆VKA 0.2 0.5 mV/V IK = 2mA, VKA = 3V to 36V; l 3
Reference Drift ∆VREF/∆T 30 ppm/°C VKA = 5V, IK = 2mA; l 3
Absolute maximum V+ and VCOLLECTOR V+, VCOLLECTOR 36 V 2
Absolute maximum VCOMP, RTOP, RMID, VREF VCOMP, RTOP, RMID, VREF 6 V 2
Storage Temperature Range -65 150 °C 2
Ambient Temperature Range (LT1431C) TA 0 70 °C LT1431C 2
Junction Temperature Range (LT1431C) TJ 0 100 °C LT1431C 2
Maximum Junction Temperature (S8 package) TJMAX 100 °C S8 package 2
Thermal Resistance Junction-to-Ambient (S8 package) θJA 170 °C/W S8 package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE OR TIN PLATE LEADS 11

CAD (KiCad official)

  • Symbol: LT1431CS8#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1431cs8-pbf-etched.step / lt1431cs8-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1431cs8-pbf.step / lt1431cs8-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 89b48b6ad7d6bd23, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF