Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LT1363CS8#TRPBF

Analog Devices · Operational Amplifier · SO-8

LT1363CS8#TRPBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NULL passive Offset null pin, connected to pin 8 through a 10k potentiometer whose wiper goes to V+ in the suggested nulling circuit.
2 -IN input Inverting input of the voltage feedback amplifier; transient differential input up to ±10V and input voltage limited to ±VS.
3 +IN input Non-inverting input of the amplifier; transient differential input up to ±10V and input voltage limited to ±VS.
4 V- power_in Negative supply; total supply voltage V+ to V- is 36V maximum, specified at ±2.5V, ±5V and ±15V.
5 NC unconnected No internal connection.
6 VOUT output Amplifier output, drives 150Ω to ±7.5V on ±15V supplies with 50mA minimum output current and indefinite short-circuit duration, stable with any capacitive load.
7 V+ power_in Positive supply; total supply voltage V+ to V- is 36V maximum, with 7.5mA maximum supply current at ±15V.
8 NULL passive Offset null pin, connected to pin 1 through a 10k potentiometer whose wiper goes to V+ in the suggested nulling circuit.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Operational Amplifier/Comparator
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 0.5 1.5 mV VS=±15V, TA=25°C 2
Input Offset Voltage VOS 0.7 1.8 mV VS=±2.5V, TA=25°C 2
Input Offset Current IOS 120 350 nA VS=±2.5V to ±15V, TA=25°C 2
Input Bias Current IB 0.6 2 µA VS=±2.5V to ±15V, TA=25°C 2
Input Resistance RIN 12 50 MΩ VCM=±12V, VS=±15V 2
Input Voltage Range+ 12 13.4 V VS=±15V 2
Input Voltage Range+ 2.5 3.4 V VS=±5V 2
Input Voltage Range+ 0.5 1.1 V VS=±2.5V 2
Input Voltage Range- -13.2 -12 V VS=±15V 2
Input Voltage Range- -3.2 -2.5 V VS=±5V 2
Input Voltage Range- -0.9 -0.5 V VS=±2.5V 2
Common Mode Rejection Ratio CMRR 84 90 dB VCM=±12V, VS=±15V 2
Common Mode Rejection Ratio CMRR 76 81 dB VCM=±2.5V, VS=±5V 2
Common Mode Rejection Ratio CMRR 66 71 dB VCM=±0.5V, VS=±2.5V 2
Power Supply Rejection Ratio PSRR 90 100 dB VS=±2.5V to ±15V 2
Large-Signal Voltage Gain AVOL 4.5 9 V/mV VOUT=±12V, RL=1k, VS=±15V 2
Large-Signal Voltage Gain AVOL 3 6.5 V/mV VOUT=±10V, RL=500Ω, VS=±15V 2
Large-Signal Voltage Gain AVOL 2 3.8 V/mV VOUT=±7.5V, RL=150Ω, VS=±15V 2
Large-Signal Voltage Gain AVOL 3 6.4 V/mV VOUT=±2.5V, RL=500Ω, VS=±5V 2
Large-Signal Voltage Gain AVOL 2 5.6 V/mV VOUT=±2.5V, RL=150Ω, VS=±5V 2
Large-Signal Voltage Gain AVOL 2.5 5.2 V/mV VOUT=±1V, RL=500Ω, VS=±2.5V 2
Output Swing VOUT 13.5 14 ±V RL=1k, VIN=±40mV, VS=±15V 3
Output Swing VOUT 13 13.7 ±V RL=500Ω, VIN=±40mV, VS=±15V 3
Output Swing VOUT 3.5 4.1 ±V RL=500Ω, VIN=±40mV, VS=±5V 3
Output Swing VOUT 3.4 3.8 ±V RL=150Ω, VIN=±40mV, VS=±5V 3
Output Swing VOUT 1.3 1.7 ±V RL=500Ω, VIN=±40mV, VS=±2.5V 3
Output Current IOUT 50 60 mA VOUT=±7.5V, VS=±15V 3
Output Current IOUT 23 29 mA VOUT=±3.4V, VS=±5V 3
Short-Circuit Current ISC 70 105 mA VOUT=0V, VIN=±3V, VS=±15V 3
Slew Rate SR 750 1000 V/µs AV=-2, (Note 5), VS=±15V 3
Slew Rate SR 300 450 V/µs AV=-2, (Note 5), VS=±5V 3
Supply Current IS 6.3 7.5 mA VS=±15V, TA=25°C 3
Supply Current IS 6 7.2 mA VS=±5V, TA=25°C 3
Input Offset Voltage VOS 2 mV VS=±15V, 0°C≤TA≤70°C 3
Input VOS Drift 10 13 µV/°C VS=±2.5V to ±15V, 0°C≤TA≤70°C (Note 7) 3
Input Offset Current IOS 500 nA VS=±2.5V to ±15V, 0°C≤TA≤70°C 3
Input Bias Current IB 3 µA VS=±2.5V to ±15V, 0°C≤TA≤70°C 3
Supply Current IS 8.7 mA VS=±15V, 0°C≤TA≤70°C 4
Supply Current IS 8.4 mA VS=±5V, 0°C≤TA≤70°C 4
Input Offset Voltage VOS 2.5 mV VS=±15V, -40°C≤TA≤85°C 4
Input Offset Current IOS 600 nA VS=±2.5V to ±15V, -40°C≤TA≤85°C 4
Input Bias Current IB 3.6 µA VS=±2.5V to ±15V, -40°C≤TA≤85°C 4
Supply Current IS 9 mA VS=±15V, -40°C≤TA≤85°C 4
Total Supply Voltage 36 V V+ to V- 2
Differential Input Voltage -10 10 V Transient only (Note 2) 2
Operating Temperature Range -40 85 °C Note 8 2
Specified Temperature Range -40 85 °C Note 9 2
Maximum Junction Temperature TJMAX 150 °C Plastic package 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C Soldering, 10 sec 2
Thermal Resistance Junction to Ambient θJA 190 °C/W S8 package 2
Gain Bandwidth GBW 70 MHz f=1MHz, VS=±15V 3

CAD (KiCad official)

  • Symbol: LT1363CS8#TRPBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: lt1363cs8-trpbf-etched.step / lt1363cs8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1363cs8-trpbf.step / lt1363cs8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 78ad3691b101ab45, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF