LT1352CS8#TRPBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	OUT A	output	Output of amplifier A, which can drive a 1kΩ load to ±13V on ±15V supplies and is specified with indefinite output short-circuit duration.
2	-IN A	input	Inverting input of amplifier A; input voltage is limited to ±VS and transient differential input voltage up to ±10V is allowed.
3	+IN A	input	Non-inverting input of amplifier A; input voltage is limited to ±VS and transient differential input voltage up to ±10V is allowed.
4	V-	power_in	Negative supply rail; total supply voltage (V+ to V-) must not exceed 36V.
5	+IN B	input	Non-inverting input of amplifier B; input voltage is limited to ±VS and transient differential input voltage up to ±10V is allowed.
6	-IN B	input	Inverting input of amplifier B; input voltage is limited to ±VS and transient differential input voltage up to ±10V is allowed.
7	OUT B	output	Output of amplifier B, which can drive a 1kΩ load to ±13V on ±15V supplies and is specified with indefinite output short-circuit duration.
8	V+	power_in	Positive supply rail; total supply voltage (V+ to V-) must not exceed 36V.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	SO-8
Category	Operational Amplifier/Comparator
Pins	8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Input Offset Voltage	VOS		0.2	0.6	mV	VSUPPLY ±15V, TA = 25°C, VCM = 0V	2
Input Offset Voltage	VOS		0.3	0.8	mV	VSUPPLY ±2.5V, TA = 25°C, VCM = 0V	2
Input Offset Current	IOS		5	15	nA	VSUPPLY ±2.5V to ±15V, TA = 25°C	2
Input Bias Current	IB		20	50	nA	VSUPPLY ±2.5V to ±15V, TA = 25°C	2
Input Resistance	RIN		300	600	MΩ	VCM = ±12V, VSUPPLY ±15V	2
Positive Input Voltage Range		12	13.5		V	VSUPPLY ±15V	2
Negative Input Voltage Range		-13.5	-12		V	VSUPPLY ±15V	2
Common Mode Rejection Ratio	CMRR	80	94		dB	VCM = ±12V, VSUPPLY ±15V	2
Common Mode Rejection Ratio	CMRR	78	86		dB	VCM = ±2.5V, VSUPPLY ±5V	2
Common Mode Rejection Ratio	CMRR	68	77		dB	VCM = ±0.5V, VSUPPLY ±2.5V	2
Power Supply Rejection Ratio	PSRR	90	106		dB	VS = ±2.5V to ±15V	2
Large-Signal Voltage Gain	AVOL	40	80		V/mV	VOUT = ±12V, RL = 5k, VSUPPLY ±15V	3
Large-Signal Voltage Gain	AVOL	30	60		V/mV	VOUT = ±10V, RL = 2k, VSUPPLY ±15V	3
Large-Signal Voltage Gain	AVOL	20	40		V/mV	VOUT = ±10V, RL = 1k, VSUPPLY ±15V	3
Large-Signal Voltage Gain	AVOL	25	50		V/mV	VOUT = ±2.5V, RL = 2k, VSUPPLY ±5V	3
Output Swing	VOUT	13.5	14		±V	RL = 5k, VIN = ±10mV, VSUPPLY ±15V	3
Output Swing	VOUT	13.4	13.8		±V	RL = 2k, VIN = ±10mV, VSUPPLY ±15V	3
Output Swing	VOUT	13	13.4		±V	RL = 1k, VIN = ±10mV, VSUPPLY ±15V	3
Output Swing	VOUT	3.5	4		±V	RL = 1k, VIN = ±10mV, VSUPPLY ±5V	3
Output Swing	VOUT	3.4	3.8		±V	RL = 500Ω, VIN = ±10mV, VSUPPLY ±5V	3
Output Swing	VOUT	1.3	1.7		±V	RL = 5k, VIN = ±10mV, VSUPPLY ±2.5V	3
Output Current	IOUT	13	13.4		mA	VOUT = ±13V, VSUPPLY ±15V	3
Output Current	IOUT	6.8	7.6		mA	VOUT = ±3.4V, VSUPPLY ±5V	3
Short-Circuit Current	ISC	30	45		mA	VOUT = 0V, VIN = ±3V, VSUPPLY ±15V	3
Slew Rate	SR	120	200		V/µs	AV = -1, RL = 5k, VSUPPLY ±15V	3
Slew Rate	SR	30	50		V/µs	AV = -1, RL = 5k, VSUPPLY ±5V	3
Gain Bandwidth	GBW	2	3		MHz	f = 200kHz, RL = 10k, VSUPPLY ±15V	3
Gain Bandwidth	GBW	1.8	2.7		MHz	f = 200kHz, RL = 10k, VSUPPLY ±5V	3
Supply Current Each Amplifier	IS		250	320	µA	VSUPPLY ±15V	3
Supply Current Each Amplifier	IS		230	300	µA	VSUPPLY ±5V	3
Input Offset Voltage	VOS			0.8	mV	0°C ≤ TA ≤ 70°C, VSUPPLY ±15V, VCM = 0V	3
Input Offset Voltage	VOS			1	mV	0°C ≤ TA ≤ 70°C, VSUPPLY ±2.5V, VCM = 0V	3
Input VOS Drift			3	8	µV/°C	VSUPPLY ±2.5V to ±15V, 0°C ≤ TA ≤ 70°C (Note 6)	3
Input Offset Current	IOS			20	nA	VSUPPLY ±2.5V to ±15V, 0°C ≤ TA ≤ 70°C	3
Input Bias Current	IB			75	nA	VSUPPLY ±2.5V to ±15V, 0°C ≤ TA ≤ 70°C	3
Common Mode Rejection Ratio	CMRR	78			dB	0°C ≤ TA ≤ 70°C, VCM = ±12V, VSUPPLY ±15V	4
Common Mode Rejection Ratio	CMRR	77			dB	0°C ≤ TA ≤ 70°C, VCM = ±2.5V, VSUPPLY ±5V	4
Common Mode Rejection Ratio	CMRR	67			dB	0°C ≤ TA ≤ 70°C, VCM = ±0.5V, VSUPPLY ±2.5V	4
Power Supply Rejection Ratio	PSRR	89			dB	0°C ≤ TA ≤ 70°C, VS = ±2.5V to ±15V	4
Large-Signal Voltage Gain	AVOL	25			V/mV	0°C ≤ TA ≤ 70°C, VOUT = ±12V, RL = 5k, VSUPPLY ±15V	4
Large-Signal Voltage Gain	AVOL	20			V/mV	0°C ≤ TA ≤ 70°C, VOUT = ±10V, RL = 2k, VSUPPLY ±15V	4
Output Swing	VOUT	13.4			±V	0°C ≤ TA ≤ 70°C, RL = 5k, VIN = ±10mV, VSUPPLY ±15V	4
Output Swing	VOUT	12			±V	0°C ≤ TA ≤ 70°C, RL = 1k, VIN = ±10mV, VSUPPLY ±15V	4
Output Swing	VOUT	3.4			±V	0°C ≤ TA ≤ 70°C, RL = 1k, VIN = ±10mV, VSUPPLY ±5V	4
Output Current	IOUT	12			mA	0°C ≤ TA ≤ 70°C, VOUT = ±12V, VSUPPLY ±15V	4
Supply Current Each Amplifier	IS			350	µA	0°C ≤ TA ≤ 70°C, VSUPPLY ±15V	4
Total Supply Voltage (V+ to V-)				36	V		2
Differential Input Voltage (Transient Only)		-10		10	V	Transient only, Note 2	2
Operating Temperature Range		-40		85	°C		2
Maximum Junction Temperature, Plastic Package	TJMAX			150	°C	Plastic package	2
Storage Temperature Range		-65		150	°C		2
Lead Temperature (Soldering)				300	°C	10 sec soldering	2
Thermal Resistance Junction to Ambient	θJA		190		°C/W	S8 package	2

CAD (KiCad official)

Symbol: LT1352CS8#TRPBF
Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
3D model: SO-8 (KiCad packages3D, STEP)
3D model files: lt1352cs8-trpbf-etched.step / lt1352cs8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1352cs8-trpbf.step / lt1352cs8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (16 pp, sha256 5736c728a14903af, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

LT1352CS8#TRPBF

Verified LT1352CS8#TRPBF

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README