3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1236AIS8-5#PBF
Analog Devices · Voltage References · SO-8
LT1236AIS8-5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Internally connected pin; do not connect external circuitry to this pin. |
| 2 | VIN | power_in | Input supply pin; absolute maximum input voltage is 40V and the input/output differential must be at least 1V. |
| 3 | NC | unconnected | Internally connected pin; do not connect external circuitry to this pin. |
| 4 | GND | power_in | Ground reference pin for the reference output. |
| 5 | TRIM | passive | Output trim pin; on the LT1236-5 its input impedance is about 100kΩ with 13:1 attenuation to the output. |
| 6 | VOUT | power_out | Precision 5V reference output that sources and sinks up to 10mA in series mode. |
| 7 | NC | unconnected | Internally connected pin; do not connect external circuitry to this pin. |
| 8 | NC | unconnected | Internally connected pin; do not connect external circuitry to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Temperature Coefficient | 2 | 5 | ppm/°C | TMIN ≤ TJ ≤ TMAX (Note 2) | 2 | ||
| Line Regulation | 4 | 12 | ppm/V | 7.2V ≤ VIN ≤ 10V (Note 3) | 2 | ||
| Line Regulation | 20 | ppm/V | 7.2V ≤ VIN ≤ 10V (Note 3), ● over specified temperature range | 2 | |||
| Line Regulation | 2 | 6 | ppm/V | 10V ≤ VIN ≤ 40V (Note 3) | 2 | ||
| Line Regulation | 10 | ppm/V | 10V ≤ VIN ≤ 40V (Note 3), ● over specified temperature range | 2 | |||
| Load Regulation (Sourcing Current) | 10 | 20 | ppm/mA | 0 ≤ IOUT ≤ 10mA (Note 3) | 2 | ||
| Load Regulation (Sourcing Current) | 35 | ppm/mA | 0 ≤ IOUT ≤ 10mA (Note 3), ● over specified temperature range | 2 | |||
| Load Regulation (Sinking Current) | 60 | 100 | ppm/mA | 0 ≤ IOUT ≤ 10mA (Note 3) | 3 | ||
| Load Regulation (Sinking Current) | 150 | ppm/mA | 0 ≤ IOUT ≤ 10mA (Note 3), ● over specified temperature range | 3 | |||
| Supply Current | 0.8 | 1.2 | mA | VIN = 15V, IOUT = 0, TA = 25°C, unless otherwise noted | 3 | ||
| Supply Current | 1.5 | mA | VIN = 15V, IOUT = 0, ● over specified temperature range | 3 | |||
| Output Voltage Noise | 3 | µVP-P | 0.1Hz ≤ f ≤ 10Hz (Note 5) | 3 | |||
| Output Voltage Noise | 2.2 | 3.5 | µVRMS | 10Hz ≤ f ≤ 1kHz (Note 5) | 3 | ||
| Long-Term Stability of Output Voltage | 20 | ppm | ∆t = 1000Hrs Non-Cumulative (Note 6) | 3 | |||
| Temperature Hysteresis of Output | 10 | ppm | ∆T = ±25°C (Note 7) | 3 | |||
| Input Voltage | VIN | 40 | V | 2 | |||
| Input/Output Voltage Differential | 35 | V | 2 | ||||
| Output-to-Ground Voltage (Shunt Mode Current Limit) LT1236-5 | 10 | V | Shunt mode current limit | 2 | |||
| Trim Pin-to-Ground Voltage Negative | -20 | V | 2 | ||||
| Output Short-Circuit Duration | 10 | sec | VIN = 35V | 2 | |||
| Operating Temperature Range LT1236AI | TA | -40 | 85 | °C | LT1236AI, BI, CI | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance, Junction-to-Ambient | θJA | 130 | °C/W | S8 package, TJMAX = 125°C | 2 |
CAD (KiCad official)
- Symbol:
LT1236AIS8-5#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1236ais8-5-pbf-etched.step/lt1236ais8-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1236ais8-5-pbf.step/lt1236ais8-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
048ffa4ce4e4ef17, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).