main
Ray
Publish 0.1.0
765efd2
LT1236AIS8-10#PBF
Analog Devices · Voltage References · SO-8
LT1236AIS8-10#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 2 | VIN | power_in | Input supply pin with an absolute maximum of 40V, a maximum input/output differential of 35V, and a minimum input/output differential of 1V. |
| 3 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 4 | GND | power_in | Ground pin, which carries only about 1mA in series mode and can be used as a sense line. |
| 5 | TRIM | passive | Output voltage trim pin with about 12kΩ impedance, about 5V nominal open-circuit voltage and 70:1 attenuation to the output on the LT1236-10, giving ±70mV trim range; absolute maximum trim-to-ground is VOUT positive and -20V negative. |
| 6 | VOUT | output | Reference output (10V for the LT1236-10) that sources and sinks up to 10mA, with an absolute maximum output-to-ground voltage of 16V in shunt mode. |
| 7 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 8 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1236A-10) | 9.995 | 10 | 10.005 | V | VIN = 10V, IOUT = 0, TA = 25°C | 3 | |
| Output Voltage Temperature Coefficient (LT1236A-10) | 2 | 5 | ppm/°C | TMIN ≤ TJ ≤ TMAX | 3 | ||
| Line Regulation | 1 | 4 | ppm/V | 11.5V ≤ VIN ≤ 14.5V | 3 | ||
| Line Regulation over temperature | 6 | ppm/V | 11.5V ≤ VIN ≤ 14.5V, over specified temperature range (●) | 3 | |||
| Line Regulation | 0.5 | 2 | ppm/V | 14.5V ≤ VIN ≤ 40V | 3 | ||
| Line Regulation over temperature | 4 | ppm/V | 14.5V ≤ VIN ≤ 40V, over specified temperature range (●) | 3 | |||
| Load Regulation (Sourcing Current) | 12 | 25 | ppm/mA | 0 ≤ IOUT ≤ 10mA | 3 | ||
| Load Regulation (Sourcing Current) over temperature | 40 | ppm/mA | 0 ≤ IOUT ≤ 10mA, over specified temperature range (●) | 3 | |||
| Load Regulation (Shunt Mode) | 50 | 100 | ppm/mA | 1.7mA ≤ ISHUNT ≤ 10mA (Notes 3, 4) | 3 | ||
| Load Regulation (Shunt Mode) over temperature | 150 | ppm/mA | 1.7mA ≤ ISHUNT ≤ 10mA, over specified temperature range (●) | 3 | |||
| Series Mode Supply Current | 1.2 | 1.7 | mA | VIN = 10V, IOUT = 0, TA = 25°C | 3 | ||
| Series Mode Supply Current over temperature | 2 | mA | VIN = 10V, IOUT = 0, over specified temperature range (●) | 3 | |||
| Shunt Mode Minimum Current | 1.1 | 1.5 | mA | VIN is Open | 3 | ||
| Shunt Mode Minimum Current over temperature | 1.7 | mA | VIN is Open, over specified temperature range (●) | 3 | |||
| Output Voltage Noise 0.1Hz to 10Hz | 6 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 | |||
| Output Voltage Noise 10Hz to 1kHz | 3.5 | 6 | µVRMS | 10Hz ≤ f ≤ 1kHz | 3 | ||
| Long-Term Stability of Output Voltage | 30 | ppm | ∆t = 1000Hrs Non-Cumulative | 3 | |||
| Temperature Hysteresis of Output | 5 | ppm | ∆T = ±25°C | 3 | |||
| Operating Temperature Range (LT1236AI) | -40 | 85 | °C | LT1236AI, BI, CI operating temperature range | 2 | ||
| Input Voltage | VIN | 40 | V | 2 | |||
| Input/Output Voltage Differential | 35 | V | 2 | ||||
| Output-to-Ground Voltage (Shunt Mode Current Limit) LT1236-10 | 16 | V | Shunt mode current limit, LT1236-10 | 2 | |||
| Trim Pin-to-Ground Voltage Negative | -20 | V | Trim pin-to-ground voltage, negative | 2 | |||
| Output Short-Circuit Duration | 10 | sec | VIN = 35V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | TJMAX as printed for the S8 and N8 thermal resistance rows | 3 |
CAD (KiCad official)
- Symbol:
LT1236AIS8-10#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1236ais8-10-pbf-etched.step/lt1236ais8-10-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1236ais8-10-pbf.step/lt1236ais8-10-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
048ffa4ce4e4ef17, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1236AIS8-10#PBF
**Analog Devices** · Voltage References · SO-8
LT1236AIS8-10#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 2 | VIN | power_in | Input supply pin with an absolute maximum of 40V, a maximum input/output differential of 35V, and a minimum input/output differential of 1V. |
| 3 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 4 | GND | power_in | Ground pin, which carries only about 1mA in series mode and can be used as a sense line. |
| 5 | TRIM | passive | Output voltage trim pin with about 12kΩ impedance, about 5V nominal open-circuit voltage and 70:1 attenuation to the output on the LT1236-10, giving ±70mV trim range; absolute maximum trim-to-ground is VOUT positive and -20V negative. |
| 6 | VOUT | output | Reference output (10V for the LT1236-10) that sources and sinks up to 10mA, with an absolute maximum output-to-ground voltage of 16V in shunt mode. |
| 7 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 8 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1236A-10) | | 9.995 | 10 | 10.005 | V | VIN = 10V, IOUT = 0, TA = 25°C | 3 |
| Output Voltage Temperature Coefficient (LT1236A-10) | | | 2 | 5 | ppm/°C | TMIN ≤ TJ ≤ TMAX | 3 |
| Line Regulation | | | 1 | 4 | ppm/V | 11.5V ≤ VIN ≤ 14.5V | 3 |
| Line Regulation over temperature | | | | 6 | ppm/V | 11.5V ≤ VIN ≤ 14.5V, over specified temperature range (●) | 3 |
| Line Regulation | | | 0.5 | 2 | ppm/V | 14.5V ≤ VIN ≤ 40V | 3 |
| Line Regulation over temperature | | | | 4 | ppm/V | 14.5V ≤ VIN ≤ 40V, over specified temperature range (●) | 3 |
| Load Regulation (Sourcing Current) | | | 12 | 25 | ppm/mA | 0 ≤ IOUT ≤ 10mA | 3 |
| Load Regulation (Sourcing Current) over temperature | | | | 40 | ppm/mA | 0 ≤ IOUT ≤ 10mA, over specified temperature range (●) | 3 |
| Load Regulation (Shunt Mode) | | | 50 | 100 | ppm/mA | 1.7mA ≤ ISHUNT ≤ 10mA (Notes 3, 4) | 3 |
| Load Regulation (Shunt Mode) over temperature | | | | 150 | ppm/mA | 1.7mA ≤ ISHUNT ≤ 10mA, over specified temperature range (●) | 3 |
| Series Mode Supply Current | | | 1.2 | 1.7 | mA | VIN = 10V, IOUT = 0, TA = 25°C | 3 |
| Series Mode Supply Current over temperature | | | | 2 | mA | VIN = 10V, IOUT = 0, over specified temperature range (●) | 3 |
| Shunt Mode Minimum Current | | | 1.1 | 1.5 | mA | VIN is Open | 3 |
| Shunt Mode Minimum Current over temperature | | | | 1.7 | mA | VIN is Open, over specified temperature range (●) | 3 |
| Output Voltage Noise 0.1Hz to 10Hz | | | | 6 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 |
| Output Voltage Noise 10Hz to 1kHz | | | 3.5 | 6 | µVRMS | 10Hz ≤ f ≤ 1kHz | 3 |
| Long-Term Stability of Output Voltage | | | | 30 | ppm | ∆t = 1000Hrs Non-Cumulative | 3 |
| Temperature Hysteresis of Output | | | | 5 | ppm | ∆T = ±25°C | 3 |
| Operating Temperature Range (LT1236AI) | | -40 | | 85 | °C | LT1236AI, BI, CI operating temperature range | 2 |
| Input Voltage | VIN | | | 40 | V | | 2 |
| Input/Output Voltage Differential | | | | 35 | V | | 2 |
| Output-to-Ground Voltage (Shunt Mode Current Limit) LT1236-10 | | | | 16 | V | Shunt mode current limit, LT1236-10 | 2 |
| Trim Pin-to-Ground Voltage Negative | | -20 | | | V | Trim pin-to-ground voltage, negative | 2 |
| Output Short-Circuit Duration | | | | 10 | sec | VIN = 35V | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | TJMAX as printed for the S8 and N8 thermal resistance rows | 3 |
## CAD (KiCad official)
- Symbol: `LT1236AIS8-10#PBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt1236ais8-10-pbf-etched.step` / `lt1236ais8-10-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1236ais8-10-pbf.step` / `lt1236ais8-10-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt1236.pdf) (12 pp, sha256 `048ffa4ce4e4ef17`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1236ais8-10-pbf-datasheet.pdf)