main
Ray
Publish 0.1.0
d2d324d
LT1236ACS8-5#PBF
Analog Devices · Voltage References · SO-8
LT1236ACS8-5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 2 | VIN | power_in | Input supply, absolute maximum 40V, with minimum input/output differential of 1V and input/output differential limited to 35V. |
| 3 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 4 | GND | power_in | Ground pin, which carries only about 1mA in series mode and can be used as a sense line. |
| 5 | TRIM | passive | Output voltage trim pin of the LT1236-5 with about 100kΩ input impedance, 13:1 attenuation to the output and a nominal 4V open-circuit voltage (about -1.7mV/°C); the trim pin-to-ground voltage is limited to VOUT positive and -20V negative. |
| 6 | VOUT | output | Reference output (5V for the LT1236-5) that sources and sinks up to 10mA, stable with all capacitive loads, with output-to-ground voltage limited to 10V for the LT1236-5. |
| 7 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 8 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1236A-5) | VOUT | 4.9975 | 5 | 5.0025 | V | VIN = 10V, IOUT = 0, TA = 25°C | 2 |
| Output Voltage Temperature Coefficient (LT1236A-5) | 2 | 5 | ppm/°C | TMIN ≤ TJ ≤ TMAX | 2 | ||
| Line Regulation | 4 | 12 | ppm/V | 7.2V ≤ VIN ≤ 10V | 2 | ||
| Line Regulation (over temperature) | 20 | ppm/V | 7.2V ≤ VIN ≤ 10V, over specified temperature range | 2 | |||
| Line Regulation | 2 | 6 | ppm/V | 10V ≤ VIN ≤ 40V | 2 | ||
| Line Regulation (over temperature) | 10 | ppm/V | 10V ≤ VIN ≤ 40V, over specified temperature range | 2 | |||
| Load Regulation (Sourcing Current) | 10 | 20 | ppm/mA | 0 ≤ IOUT ≤ 10mA | 2 | ||
| Load Regulation (Sourcing Current, over temperature) | 35 | ppm/mA | 0 ≤ IOUT ≤ 10mA, over specified temperature range | 2 | |||
| Load Regulation (Sinking Current) | 60 | 100 | ppm/mA | 0 ≤ IOUT ≤ 10mA | 3 | ||
| Load Regulation (Sinking Current, over temperature) | 150 | ppm/mA | 0 ≤ IOUT ≤ 10mA, over specified temperature range | 3 | |||
| Supply Current | 0.8 | 1.2 | mA | 3 | |||
| Supply Current (over temperature) | 1.5 | mA | over specified temperature range | 3 | |||
| Output Voltage Noise (0.1Hz to 10Hz) | 3 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 | |||
| Output Voltage Noise (10Hz to 1kHz) | 2.2 | 3.5 | µVRMS | 10Hz ≤ f ≤ 1kHz | 3 | ||
| Long-Term Stability of Output Voltage | 20 | ppm | ∆t = 1000Hrs Non-Cumulative | 3 | |||
| Temperature Hysteresis of Output | 10 | ppm | ∆T = ±25°C | 3 | |||
| Input Voltage | 40 | V | 2 | ||||
| Input/Output Voltage Differential | 35 | V | 2 | ||||
| Output-to-Ground Voltage (Shunt Mode Current Limit), LT1236-5 | 10 | V | 2 | ||||
| Trim Pin-to-Ground Voltage, Negative | -20 | V | 2 | ||||
| Operating Temperature Range (LT1236AC) | 0 | 70 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Thermal Resistance, Junction to Ambient (S8) | θJA | 190 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT1236ACS8-5#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1236acs8-5-pbf-etched.step/lt1236acs8-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1236acs8-5-pbf.step/lt1236acs8-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
048ffa4ce4e4ef17, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1236ACS8-5#PBF
**Analog Devices** · Voltage References · SO-8
LT1236ACS8-5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 2 | VIN | power_in | Input supply, absolute maximum 40V, with minimum input/output differential of 1V and input/output differential limited to 35V. |
| 3 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 4 | GND | power_in | Ground pin, which carries only about 1mA in series mode and can be used as a sense line. |
| 5 | TRIM | passive | Output voltage trim pin of the LT1236-5 with about 100kΩ input impedance, 13:1 attenuation to the output and a nominal 4V open-circuit voltage (about -1.7mV/°C); the trim pin-to-ground voltage is limited to VOUT positive and -20V negative. |
| 6 | VOUT | output | Reference output (5V for the LT1236-5) that sources and sinks up to 10mA, stable with all capacitive loads, with output-to-ground voltage limited to 10V for the LT1236-5. |
| 7 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 8 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1236A-5) | VOUT | 4.9975 | 5 | 5.0025 | V | VIN = 10V, IOUT = 0, TA = 25°C | 2 |
| Output Voltage Temperature Coefficient (LT1236A-5) | | | 2 | 5 | ppm/°C | TMIN ≤ TJ ≤ TMAX | 2 |
| Line Regulation | | | 4 | 12 | ppm/V | 7.2V ≤ VIN ≤ 10V | 2 |
| Line Regulation (over temperature) | | | | 20 | ppm/V | 7.2V ≤ VIN ≤ 10V, over specified temperature range | 2 |
| Line Regulation | | | 2 | 6 | ppm/V | 10V ≤ VIN ≤ 40V | 2 |
| Line Regulation (over temperature) | | | | 10 | ppm/V | 10V ≤ VIN ≤ 40V, over specified temperature range | 2 |
| Load Regulation (Sourcing Current) | | | 10 | 20 | ppm/mA | 0 ≤ IOUT ≤ 10mA | 2 |
| Load Regulation (Sourcing Current, over temperature) | | | | 35 | ppm/mA | 0 ≤ IOUT ≤ 10mA, over specified temperature range | 2 |
| Load Regulation (Sinking Current) | | | 60 | 100 | ppm/mA | 0 ≤ IOUT ≤ 10mA | 3 |
| Load Regulation (Sinking Current, over temperature) | | | | 150 | ppm/mA | 0 ≤ IOUT ≤ 10mA, over specified temperature range | 3 |
| Supply Current | | | 0.8 | 1.2 | mA | | 3 |
| Supply Current (over temperature) | | | | 1.5 | mA | over specified temperature range | 3 |
| Output Voltage Noise (0.1Hz to 10Hz) | | | 3 | | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 |
| Output Voltage Noise (10Hz to 1kHz) | | | 2.2 | 3.5 | µVRMS | 10Hz ≤ f ≤ 1kHz | 3 |
| Long-Term Stability of Output Voltage | | | 20 | | ppm | ∆t = 1000Hrs Non-Cumulative | 3 |
| Temperature Hysteresis of Output | | | 10 | | ppm | ∆T = ±25°C | 3 |
| Input Voltage | | | | 40 | V | | 2 |
| Input/Output Voltage Differential | | | | 35 | V | | 2 |
| Output-to-Ground Voltage (Shunt Mode Current Limit), LT1236-5 | | | | 10 | V | | 2 |
| Trim Pin-to-Ground Voltage, Negative | | -20 | | | V | | 2 |
| Operating Temperature Range (LT1236AC) | | 0 | | 70 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | Soldering, 10 sec | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | | 2 |
| Thermal Resistance, Junction to Ambient (S8) | θJA | | 190 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `LT1236ACS8-5#PBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt1236acs8-5-pbf-etched.step` / `lt1236acs8-5-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1236acs8-5-pbf.step` / `lt1236acs8-5-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/lt1236.pdf) (12 pp, sha256 `048ffa4ce4e4ef17`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1236acs8-5-pbf-datasheet.pdf)