component
LT1206CS8#PBF
Public Made by Adomby adom
Analog Devices Operational Amplifier, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT1206CS8#PBF
Analog Devices · Operational Amplifier · SO-8
LT1206CS8#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | V+ | power_in | Positive supply pin; the LT1206 operates from ±5V to ±15V supplies with an absolute maximum supply voltage of ±18V. |
| 2 | -IN | input | Inverting input of the current feedback amplifier, which requires resistive feedback from the output for stable operation and has a typical input current of ±10µA at ±15V. |
| 3 | +IN | input | Noninverting input; the common-mode input voltage range is ±12V for VS = ±15V and ±2V for VS = ±5V. |
| 4 | S/D | input | Shutdown pin that must be grounded or tied to V- when shutdown is not used; the amplifier shuts down when it is open or driven to V+, and its current sets the quiescent supply current. |
| 5 | COMP | passive | Optional compensation pin: a 0.01µF capacitor between OUT and COMP eliminates output-stage peaking with capacitive loads, and it must be left open for resistive loads. |
| 6 | V- | power_in | Negative supply pin; the LT1206 operates from ±5V to ±15V split supplies (10V to 30V total). |
| 7 | OUT | output | Output pin with a minimum output drive current of 250mA (typical 500mA at RL = 1Ω). |
| 8 | V+ | power_in | Positive supply pin; connect to the positive supply rail (operating range ±5V to ±15V, absolute maximum ±18V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | -10 | 3 | 10 | mV | 3 | |
| Input Offset Voltage | VOS | -15 | 15 | mV | over full operating temperature range (l) | 3 | |
| Noninverting Input Current | IIN+ | -8 | 2 | 8 | µA | 3 | |
| Noninverting Input Current | IIN+ | -25 | 25 | µA | over full operating temperature range (l) | 3 | |
| Inverting Input Current | IIN- | -60 | 10 | 60 | µA | 3 | |
| Inverting Input Current | IIN- | -100 | 100 | µA | over full operating temperature range (l) | 3 | |
| Input Resistance | RIN | 1.5 | 10 | MΩ | VIN = ±12V, VS = ±15V; over full operating temperature range (l) | 3 | |
| Input Resistance | RIN | 0.5 | 5 | MΩ | VIN = ±2V, VS = ±5V; over full operating temperature range (l) | 3 | |
| Input Voltage Range | -12 | 13.5 | V | VS = ±15V; over full operating temperature range (l) | 3 | ||
| Input Voltage Range | -2 | 3.5 | V | VS = ±5V; over full operating temperature range (l) | 3 | ||
| Common Mode Rejection Ratio | CMRR | 55 | 62 | dB | VS = ±15V, VCM = ±12V; over full operating temperature range (l) | 3 | |
| Common Mode Rejection Ratio | CMRR | 50 | 60 | dB | VS = ±5V, VCM = ±2V; over full operating temperature range (l) | 3 | |
| Inverting Input Current Common Mode Rejection | 0.1 | 10 | µA/V | VS = ±15V, VCM = ±12V; over full operating temperature range (l) | 3 | ||
| Power Supply Rejection Ratio | PSRR | 60 | 77 | dB | VS = ±5V to ±15V; over full operating temperature range (l) | 3 | |
| Noninverting Input Current Power Supply Rejection | 30 | 500 | nA/V | VS = ±5V to ±15V; over full operating temperature range (l) | 3 | ||
| Inverting Input Current Power Supply Rejection | 0.7 | 5 | µA/V | VS = ±5V to ±15V; over full operating temperature range (l) | 3 | ||
| Large-Signal Voltage Gain | AV | 55 | 71 | dB | VS = ±15V, VOUT = ±10V, RL = 50Ω; over full operating temperature range (l) | 3 | |
| Large-Signal Voltage Gain | AV | 55 | 68 | dB | VS = ±5V, VOUT = ±2V, RL = 25Ω; over full operating temperature range (l) | 3 | |
| Transresistance | ROL | 100 | 260 | kΩ | VS = ±15V, VOUT = ±10V, RL = 50Ω; over full operating temperature range (l) | 3 | |
| Transresistance | ROL | 75 | 200 | kΩ | VS = ±5V, VOUT = ±2V, RL = 25Ω; over full operating temperature range (l) | 3 | |
| Maximum Output Voltage Swing | VOUT | -11.5 | 12.5 | V | VS = ±15V, RL = 50Ω; over full operating temperature range (l) | 3 | |
| Maximum Output Voltage Swing | VOUT | -10 | V | VS = ±15V, RL = 50Ω; over full operating temperature range (l) | 3 | ||
| Maximum Output Voltage Swing | VOUT | -2.5 | 3 | V | VS = ±15V, RL = 25Ω; over full operating temperature range (l) | 3 | |
| Maximum Output Voltage Swing | VOUT | -2 | V | VS = ±15V, RL = 25Ω; over full operating temperature range (l) | 3 | ||
| Maximum Output Current | IOUT | 250 | 500 | 1200 | mA | RL = 1Ω; over full operating temperature range (l) | 3 |
| Supply Current | IS | 20 | 30 | mA | VS = ±15V, VS/D = 0V | 3 | |
| Supply Current | IS | 35 | mA | VS = ±15V, VS/D = 0V; over full operating temperature range (l) | 3 | ||
| Supply Current, RS/D = 51k (Note 4) | 12 | 17 | mA | VS = ±15V | 3 | ||
| Positive Supply Current, Shutdown | 200 | µA | VS = ±15V, VS/D = 15V; over full operating temperature range (l) | 3 | |||
| Output Leakage Current, Shutdown | 10 | µA | VS = ±15V, VS/D = 15V; over full operating temperature range (l) | 3 | |||
| Slew Rate | SR | 400 | 900 | V/µs | AV = 2 (Note 5) | 3 | |
| Supply Voltage | -18 | 18 | V | 2 | |||
| Input Current | -15 | 15 | mA | 2 | |||
| Specified Temperature Range | 0 | 70 | °C | Note 3 (commercial grade; not tested beyond this range) | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Split Supply Voltage (magnitude) | VS | 5 | 15 | V | split supplies ±5V to ±15V (Power Supplies section, text) | 11 | |
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 60 | °C/W | S8 8-lead plastic SO | 2 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 60 | °C/W | S8; topside 2500 sq. mm, backside 2500 sq. mm, board 2500 sq. mm | 12 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 62 | °C/W | S8; topside 1000 sq. mm, backside 2500 sq. mm, board 2500 sq. mm | 12 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 65 | °C/W | S8; topside 225 sq. mm, backside 2500 sq. mm, board 2500 sq. mm | 12 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 69 | °C/W | S8; topside 100 sq. mm, backside 2500 sq. mm, board 2500 sq. mm | 12 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 73 | °C/W | S8; topside 100 sq. mm, backside 1000 sq. mm, board 2500 sq. mm | 12 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 80 | °C/W | S8; topside 100 sq. mm, backside 225 sq. mm, board 2500 sq. mm | 12 | ||
| Thermal Resistance, junction-to-ambient, S8 package | θJA | 83 | °C/W | S8; topside 100 sq. mm, backside 100 sq. mm, board 2500 sq. mm | 12 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | COPPER | Table 1. R Package, 7-Lead DD COPPER AREA | 12 |
CAD (KiCad official)
- Symbol:
LT1206CS8#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1206cs8-pbf-etched.step/lt1206cs8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1206cs8-pbf.step/lt1206cs8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
19ca9b349b20a02a, retrieved 2026-10-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).