component
LT1114S#TRPBF
Public Made by Adomby adom
Analog Devices Precision OpAmps, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLT1114S#TRPBF
Analog Devices · Precision OpAmps · SOIC-16
LT1114S#TRPBF from Analog Devices, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Output of amplifier A, which swings to ±13.0V typical with a 10kΩ load. |
| 2 | -IN A | input | Inverting input of amplifier A. |
| 3 | +IN A | input | Noninverting input of amplifier A, with common-mode range of ±13.5V minimum. |
| 4 | V+ | power_in | Positive supply pin; the device operates from ±1.0V minimum to ±20V maximum supplies. |
| 5 | +IN B | input | Noninverting input of amplifier B, with common-mode range of ±13.5V minimum. |
| 6 | -IN B | input | Inverting input of amplifier B. |
| 7 | OUT B | output | Output of amplifier B, which swings to ±13.0V typical with a 10kΩ load. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | OUT C | output | Output of amplifier C, which swings to ±13.0V typical with a 10kΩ load. |
| 11 | -IN C | input | Inverting input of amplifier C. |
| 12 | +IN C | input | Noninverting input of amplifier C, with common-mode range of ±13.5V minimum. |
| 13 | V- | power_in | Negative supply pin; the device operates from ±1.0V minimum to ±20V maximum supplies. |
| 14 | +IN D | input | Noninverting input of amplifier D, with common-mode range of ±13.5V minimum. |
| 15 | -IN D | input | Inverting input of amplifier D. |
| 16 | OUT D | output | Output of amplifier D, which swings to ±13.0V typical with a 10kΩ load. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOIC-16 |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 25 | 75 | µV | VS = ±15V, VCM = 0V, TA = 25°C | 3 | |
| Input Offset Voltage at ±1.0V supplies | VOS | 45 | 130 | µV | VS = ±1.0V | 3 | |
| Input Offset Current LT1114S | IOS | 75 | 330 | pA | VS = ±15V, TA = 25°C | 3 | |
| Input Bias Current LT1114S | IB | 100 | 450 | pA | VS = ±15V, TA = 25°C | 3 | |
| Common Mode Rejection Ratio | CMRR | 115 | 136 | dB | VCM = ±13.5V | 3 | |
| Power Supply Rejection Ratio | PSRR | 114 | 126 | dB | VS = ±1.0V to ±20V | 3 | |
| Differential Input Resistance | RIN | 15 | 40 | MΩ | Differential mode, guaranteed by design (Note 4) | 3 | |
| Large-Signal Voltage Gain | AVOL | 800 | 5000 | V/mV | VO = ±12V, RL = 10kΩ | 3 | |
| Large-Signal Voltage Gain | AVOL | 600 | 1300 | V/mV | VO = ±10V, RL = 2kΩ | 3 | |
| Output Voltage Swing | VOUT | 13 | 14 | V | RL = 10kΩ | 3 | |
| Output Voltage Swing | VOUT | 11 | 12.4 | V | RL = 2kΩ | 3 | |
| Slew Rate | SR | 0.16 | 0.3 | V/µs | 3 | ||
| Gain-Bandwidth Product | GBW | 450 | 750 | kHz | fO = 10kHz | 3 | |
| Supply Current per Amplifier | IS | 350 | 450 | µA | VS = ±15V, TA = 25°C | 3 | |
| Offset Voltage Match | ∆VOS | 40 | 130 | µV | Notes 6 | 3 | |
| Noninverting Bias Current Match LT1114S | ∆IB+ | 120 | 680 | pA | Notes 6, 7 | 3 | |
| Common Mode Rejection Ratio Match | ∆CMRR | 113 | 136 | dB | Notes 6, 8 | 3 | |
| Power Supply Rejection Ratio Match | ∆PSRR | 112 | 130 | dB | Notes 6, 8 | 3 | |
| Input Voltage Range | VCM | 13.5 | 14.3 | V | VS = ±15V | 3 | |
| Supply Voltage | 20 | V | Supply Voltage ±20V | 2 | |||
| Differential Input Current | 10 | mA | Note 2, ±10mA | 2 | |||
| Input Voltage | 20 | V | Equal to supply voltage, ±20V | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Operating Temperature Range LT1114S | -40 | 85 | °C | LT1114S; specified 0°C to 70°C, functional -40°C to 85°C (Note 11) | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | NOTE: LEAD DIMENSIONS APPLY TO SOLDER DIP/PLATE (1.143, 1.651) OR TIN PLATE LEADS | 13 |
CAD (KiCad official)
- Symbol:
LT1114S#TRPBF - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
lt1114s-trpbf-etched.step/lt1114s-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1114s-trpbf.step/lt1114s-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
d068255ad19a80f1, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).