Generated by kicad-footprint-generator · KiCad file format 20260206
LT1085IT#PBF
Analog Devices · Linear Voltage Regulators (LDO) · TO-220
LT1085IT#PBF from Analog Devices, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | passive | Adjust pin sets the output voltage through the external divider; adjust pin current is 55µA typical and 120µA maximum at TJ = 25°C, and the reference is 1.250V typical (1.238V to 1.262V at 25°C). |
| 2 | VOUT | power_out | Regulated output, electrically connected to the metal tab; the datasheet requires a 10µF output capacitor for stability and gives a current limit of 3.2A minimum to 4.0A maximum at 5V input-to-output differential for the LT1085. |
| 3 | VIN | power_in | Unregulated input supply; the input-to-output differential must not exceed 30V for I-grade parts, and dropout is 1.5V maximum at full output current. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TO-220 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage | 1.238 | 1.25 | 1.262 | V | IOUT = 10mA, TJ = 25°C, (VIN, VOUT) = 3V | 5 | |
| Reference Voltage | 1.225 | 1.25 | 1.27 | V | 10mA ≤ IOUT ≤ IFULL_LOAD, 1.5V ≤ (VIN, VOUT) ≤ 25V (Notes 4, 6, 7), full operating temperature range | 5 | |
| Line Regulation | 0.015 | 0.2 | % | ILOAD = 10mA, 1.5V ≤ (VIN, VOUT) ≤ 15V, TJ = 25°C (Notes 2, 3) | 5 | ||
| Line Regulation | 0.035 | 0.2 | % | ILOAD = 10mA, 1.5V ≤ (VIN, VOUT) ≤ 15V (Notes 2, 3), full operating temperature range | 5 | ||
| Line Regulation | 0.05 | 0.5 | % | C-, I-Grades: 15V ≤ (VIN, VOUT) ≤ 30V (Notes 2, 3) | 5 | ||
| Load Regulation | 0.1 | 0.2 | % | (VIN, VOUT) = 3V, 10mA ≤ IOUT ≤ IFULL_LOAD, TJ = 25°C (Notes 2, 3, 4, 6) | 5 | ||
| Load Regulation | 0.3 | 0.4 | % | (VIN, VOUT) = 3V, 10mA ≤ IOUT ≤ IFULL_LOAD (Notes 2, 3, 4, 6), full operating temperature range | 5 | ||
| Dropout Voltage | 1.3 | 1.5 | V | ΔVREF = 1%, IOUT = IFULL_LOAD (Notes 5, 6, 8) | 5 | ||
| Current Limit (LT1085) | 3.2 | 4 | A | (VIN, VOUT) = 5V | 5 | ||
| Current Limit (LT1085) | 0.2 | 0.5 | A | (VIN, VOUT) = 25V | 5 | ||
| Minimum Load Current | 5 | 10 | mA | (VIN, VOUT) = 25V | 5 | ||
| Thermal Regulation (LT1085) | 0.004 | 0.02 | %/W | TA = 25°C, 30ms Pulse | 5 | ||
| Ripple Rejection | 60 | 75 | dB | f = 120Hz, CADJ = 25µF, COUT = 25µF Tantalum, IOUT = IFULL_LOAD, (VIN, VOUT) = 3V (Notes 6, 7, 8) | 5 | ||
| Adjust Pin Current | 55 | 120 | µA | TJ = 25°C | 5 | ||
| Adjust Pin Current Change | 0.2 | 5 | µA | 10mA ≤ IOUT ≤ IFULL_LOAD, 1.5V ≤ (VIN, VOUT) ≤ 25V (Note 6) | 5 | ||
| Temperature Stability | 0.5 | % | full operating temperature range | 5 | |||
| Long-Term Stability | 0.3 | 1 | % | TA = 125°C, 1000 Hrs | 5 | ||
| RMS Output Noise (% of VOUT) | 0.003 | % | TA = 25°C, 10Hz ≤ f ≤ 10kHz | 5 | |||
| Thermal Resistance Junction-to-Case, Control Circuitry (T Package) | 0.7 | °C/W | LT1085, M,T Package | 5 | |||
| Thermal Resistance Junction-to-Case, Power Transistor (T Package) | 3 | °C/W | LT1085, M,T Package | 5 | |||
| Thermal Resistance Junction-to-Ambient (T Package) | θJA | 50 | °C/W | T package | 2 | ||
| Input-to-Output Voltage Differential (I-Grades) | 30 | V | I-Grades | 2 | |||
| Operating Junction Temperature Range, Control Section (I-Grades) | -40 | 125 | °C | I-Grades: Control Section | 2 | ||
| Operating Junction Temperature Range, Power Transistor (I-Grades) | -40 | 150 | °C | I-Grades: Power Transistor | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 |
CAD (KiCad official)
- Symbol:
LT1085IT#PBF - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
lt1085it-etched.step/lt1085it-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1085it.step/lt1085it.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
bba88f90587a7cfb, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).