3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1084IT#PBF
Analog Devices · Linear Voltage Regulators (LDO) · TO-220-3
LT1084IT#PBF from Analog Devices, in a TO-220-3. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ADJ | input | The ADJ pin is the adjust terminal of the regulator, with an adjust pin current of 55µA typical and 120µA maximum at TJ = 25°C. |
| 2 | VOUT | power_out | The VOUT pin is the regulated output, with dropout guaranteed at a maximum of 1.5V at maximum output current. |
| 3 | VIN | power_in | The VIN pin is the unregulated input, with the input-to-output differential limited to 30V for I-grades. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TO-220-3 |
| Category | Power Supply Chip |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage | 1.225 | 1.25 | 1.27 | V | 10mA ≤ IOUT ≤ IFULL_LOAD, 1.5V ≤ (VIN, VOUT) ≤ 25V (Notes 4, 6, 7) | 5 | |
| Reference Voltage | 1.238 | 1.25 | 1.262 | V | IOUT = 10mA, TJ = 25°C, (VIN, VOUT) = 3V | 5 | |
| Line Regulation | 0.015 | 0.2 | % | ILOAD = 10mA, 1.5V ≤ (VIN, VOUT) ≤ 15V, TJ = 25°C (Notes 2, 3) | 5 | ||
| Line Regulation | 0.035 | 0.2 | % | ILOAD = 10mA, 1.5V ≤ (VIN, VOUT) ≤ 15V (Notes 2, 3) | 5 | ||
| Line Regulation | 0.05 | 0.5 | % | C-, I-Grades: 15V ≤ (VIN, VOUT) ≤ 30V (Notes 2, 3) | 5 | ||
| Load Regulation | 0.1 | 0.3 | % | (VIN, VOUT) = 3V, 10mA ≤ IOUT ≤ IFULL_LOAD, TJ = 25°C (Notes 2, 3, 4, 6) | 5 | ||
| Load Regulation | 0.2 | 0.4 | % | (VIN, VOUT) = 3V, 10mA ≤ IOUT ≤ IFULL_LOAD (Notes 2, 3, 4, 6) | 5 | ||
| Dropout Voltage | 1.3 | 1.5 | V | ΔVREF = 1%, IOUT = IFULL_LOAD (Notes 5, 6, 8) | 5 | ||
| Current Limit | 5.5 | 6.5 | A | (VIN, VOUT) = 5V | 5 | ||
| Current Limit | 0.3 | 0.6 | A | (VIN, VOUT) = 25V | 5 | ||
| Minimum Load Current | 5 | 10 | mA | (VIN, VOUT) = 25V | 5 | ||
| Ripple Rejection | 60 | 75 | dB | f = 120Hz, CADJ = 25µF, COUT = 25µF Tantalum, IOUT = IFULL_LOAD, (VIN, VOUT) = 3V (Notes 6, 7, 8) | 5 | ||
| Adjust Pin Current | 55 | 120 | µA | TJ = 25°C | 5 | ||
| Adjust Pin Current Change | 0.2 | 5 | µA | 10mA ≤ IOUT ≤ IFULL_LOAD, 1.5V ≤ (VIN, VOUT) ≤ 25V (Note 6) | 5 | ||
| Temperature Stability | 0.5 | % | 5 | ||||
| Long-Term Stability | 0.3 | 1 | % | TA = 125°C, 1000 Hrs | 5 | ||
| Thermal Regulation | 0.003 | 0.015 | %/W | TA = 25°C, 30ms Pulse | 5 | ||
| RMS Output Noise (% of VOUT) | 0.003 | % | TA = 25°C, 10Hz ≤ f ≤ 10kHz | 5 | |||
| Input-to-Output Voltage Differential (I-Grades) | 30 | V | I-Grades | 2 | |||
| Operating Junction Temperature Range, Control Section (I-Grades) | -40 | 125 | °C | I-Grades control section | 2 | ||
| Operating Junction Temperature Range, Power Transistor (I-Grades) | -40 | 150 | °C | I-Grades power transistor | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance Junction-to-Case, Control Circuitry | 0.65 | °C/W | LT1084 T Package | 5 | |||
| Thermal Resistance Junction-to-Case, Power Transistor | 2.7 | °C/W | LT1084 T Package | 5 | |||
| Thermal Resistance Junction-to-Ambient | θJA | 50 | °C/W | T Package | 2 |
CAD (KiCad official)
- Symbol:
LT1084IT#PBF - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220-3 (KiCad packages3D, STEP)
- 3D model files:
lt1084it-pbf-etched.step/lt1084it-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1084it-pbf.step/lt1084it-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
bba88f90587a7cfb, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).