3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1084CT-12#PBF
Analog Devices · Linear Voltage Regulators (LDO) · TO-220
LT1084CT-12#PBF from Analog Devices, in a TO-220. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground pin; the datasheet describes negative-side sensing as a true Kelvin connection, with this ground pin returned to the negative side of the load. |
| 2 | VOUT | power_out | Regulated output pin; the case/tab is electrically connected to the output, so the heat sink is at the output potential. |
| 3 | VIN | power_in | Unregulated input pin; the operating input voltage is limited to 25V for 12V devices, with transients up to 30V guaranteed and some specification degradation above the operating limit. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TO-220 |
| Category | Power Management ICs |
| Pins | 3 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1083/4/5-12, full load) | VOUT | 11.76 | 12 | 12.24 | V | 0 ≤ IOUT ≤ IFULL_LOAD, 13.5V ≤ VIN ≤ 25V (Notes 4, 6, 7, 9) | 5 |
| Line Regulation (LT1083/4/5-12) | 1 | 25 | mV | IOUT = 0mA, TJ = 25°C, 13.5V ≤ VIN ≤ 25V (Notes 2, 3) | 5 | ||
| Load Regulation (LT1083/4/5-12) | 12 | 36 | mV | VIN = 15V, 0 ≤ IOUT ≤ IFULL_LOAD, TJ = 25°C (Notes 2, 3, 4, 6) | 5 | ||
| Dropout Voltage (LT1084/5-12 column, 12V devices) | 1.3 | 1.5 | V | ΔVOUT = 120mV, IOUT = IFULL_LOAD (Notes 5, 6) | 5 | ||
| Current Limit (LT1084-12) | 5.5 | 6.5 | A | VIN = 17V | 5 | ||
| Quiescent Current (LT1083/4/5-12) | IQ | 5 | 10 | mA | VIN ≤ 25V | 6 | |
| Ripple Rejection (LT1083/4/5-12) | 54 | 60 | dB | VIN = 15V (Note 6) | 6 | ||
| Temperature Stability | 0.5 | % | Full operating temperature range (l) | 6 | |||
| Long Term Stability | 0.03 | 1 | % | TA = 125°C, 1000 Hrs. | 6 | ||
| Thermal Regulation (LT1084-3.3/5/12) | 0.003 | 0.015 | %/W | TA = 25°C, 30ms pulse | 6 | ||
| Input Voltage (absolute maximum, transient) | VIN | 30 | V | Transient input voltages (see Note *) | 2 | ||
| Operating Input Voltage (12V devices) | VIN | 25 | V | 12V devices | 2 | ||
| Operating Junction Temperature, Control Section (C-grade) | TJ | 0 | 125 | °C | C-grade control section | 2 | |
| Operating Junction Temperature, Power Transistor (C-grade) | TJ | 0 | 150 | °C | C-grade power transistor | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance Junction-to-Case, Control Circuitry (T Package) | 0.65 | °C/W | Control circuitry, junction-to-case (See Applications Information) | 6 | |||
| Thermal Resistance Junction-to-Case, Power Transistor (T Package) | 2.7 | °C/W | Power transistor, junction-to-case (See Applications Information) | 6 | |||
| Thermal Resistance Junction-to-Ambient (T Package) | θJA | 50 | °C/W | T package | 2 |
CAD (KiCad official)
- Symbol:
LT1084CT-12#PBF - Footprint:
Package_TO_SOT_THT:TO-220-3_Vertical - 3D model: TO-220 (KiCad packages3D, STEP)
- 3D model files:
lt1084ct-12-etched.step/lt1084ct-12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1084ct-12.step/lt1084ct-12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
d5e7714d2887fd47, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).