main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lt1054cp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lt1054cp: viewers · Ray
lt1054cp-etched.fit.json lt1054cp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lt1054cp-etched.glb lt1054cp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lt1054cp-etched.step lt1054cp: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lt1054cp.glb Publish 0.1.0 · Ray
lt1054cp.kicad_mod Publish 0.1.0 · Ray
lt1054cp.kicad_sym Publish 0.1.0 · Ray
lt1054cp.lbr Publish 0.1.0 · Ray
lt1054cp.step Publish 0.1.0 · Ray
package.json lt1054cp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lt1054cp: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lt1054cp · Ray

LT1054CP

Texas Instruments · DC-DC Converters · PDIP-8

LT1054CP from Texas Instruments, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB/SD input Feedback/shutdown pin for regulation via error amplifier or low-Iq shutdown when pulled below 0.45V threshold.
2 CAP+ passive Positive terminal connection for external input capacitor CIN.
3 GND power_in Ground reference and device substrate connection.
4 CAP- passive Negative terminal connection for external input capacitor CIN.
5 VOUT output Regulated negative output voltage with 1.1V typical loss at 100mA for 3.5V ≤ VCC ≤ 15V.
6 VREF power_in Internal 2.5V reference voltage output (2.25V-2.75V range) for regulator feedback with 60µA output current limit.
7 OSC input Oscillator control pin for switching frequency adjustment (nominal 25kHz, 15-35kHz range) or external synchronization.
8 VCC power_in Positive supply voltage input from 3.5V to 15V (maximum 20V for regulated circuits with VOUT ≤ 15V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package PDIP-8
Category Power Management (PMIC)
Pins 8

CAD (KiCad official)

  • Symbol: LT1054CP
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: PDIP-8 (KiCad packages3D, STEP)
  • 3D model files: lt1054cp-etched.step / lt1054cp-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1054cp.step / lt1054cp.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 cb7fc2ff583618ff, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF