main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs lt1054cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers lt1054cdwr: viewers · Ray
lt1054cdwr-etched.fit.json lt1054cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lt1054cdwr-etched.glb lt1054cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lt1054cdwr-etched.step lt1054cdwr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
lt1054cdwr.glb Publish 0.1.0 · Ray
lt1054cdwr.kicad_mod Publish 0.1.0 · Ray
lt1054cdwr.kicad_sym Publish 0.1.0 · Ray
lt1054cdwr.lbr Publish 0.1.0 · Ray
lt1054cdwr.step Publish 0.1.0 · Ray
package.json lt1054cdwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json lt1054cdwr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
README.md Initial commit: component/lt1054cdwr · Ray

LT1054CDWR

Texas Instruments · Charge Pumps · SOIC-16-300mil

LT1054CDWR from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected No internal connection.
2 NC unconnected No internal connection.
3 FB/SD input Shutdown input for low IQ operation or feedback input for error amplifier regulation; pull below threshold (≈0.45V) for shutdown; rated 0V to VCC.
4 CAP+ input Positive plate of the external charge-transfer capacitor (CIN).
5 GND power_in Ground reference terminal for the device.
6 CAP- input Negative plate of the external charge-transfer capacitor (CIN).
7 NC unconnected No internal connection.
8 NC unconnected No internal connection.
9 NC unconnected No internal connection.
10 NC unconnected No internal connection.
11 VOUT output Regulated output voltage; unregulated value approximately −VCC reduced by voltage loss, typically 1.1V at 100mA output current.
12 VREF power_in Internal reference voltage of 2.5V nominal; supplies the feedback divider network with maximum output current of approximately 60µA.
13 OSC input Oscillator control pin for adjusting or synchronizing the switching frequency; internal nominal frequency is 25kHz, rated 0V to VREF.
14 VCC power_in Device supply voltage input; operating range 3.5V to 15V.
15 NC unconnected No internal connection.
16 NC unconnected No internal connection.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Power Management (PMIC)
Pins 16

CAD (KiCad official)

  • Symbol: LT1054CDWR
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: lt1054cdwr-etched.step / lt1054cdwr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt1054cdwr.step / lt1054cdwr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 cb7fc2ff583618ff, retrieved 2026-09-24, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF