component
LT1027CCS8-5#TRPBF
Public Made by Adomby adom
Analog Devices Voltage Reference, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LT1027CCS8-5#TRPBF
Analog Devices · Voltage Reference · SO-8
LT1027CCS8-5#TRPBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input; the supply voltage (VIN) absolute maximum is 40V and the input-output differential is limited to 35V. |
| 2 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 3 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 4 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 5 | VOUT | power_out | 5V reference output that sources up to 15mA and sinks up to 10mA; output-to-ground voltage is limited to 7V, and short-circuit duration is 10 sec when VIN > 20V or indefinite when VIN ≤ 20V. |
| 6 | VTRIM | input | Output voltage trim pin (about 20kΩ impedance, 2.5V open-circuit); VTRIM-to-ground is limited to +5V positive and -0.3V negative, with a ±30mV guaranteed trim range. |
| 7 | GND | power_in | Ground return; the ground pin carries only 2mA and can be used as a low-side Kelvin sense line. |
| 8 | NR | passive | Noise reduction pin (positive input of the internal scaling amplifier) for a 1µF low-leakage Mylar capacitor to ground; it is the most sensitive pin, and 100nA of leakage causes a 150ppm output error. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1027B, C, D) | VOUT | 4.9975 | 5 | 5.0025 | V | 2 | |
| Output Voltage Temperature Coefficient (LT1027C) | TCVOUT | 2 | 3 | ppm/°C | ● full operating temperature range | 2 | |
| Line Regulation | 6 | 12 | ppm/V | 8V ≤ VIN ≤ 10V | 3 | ||
| Line Regulation (●) | 25 | ppm/V | ● full operating temperature range | 3 | |||
| Line Regulation | 3 | 6 | ppm/V | 10V ≤ VIN ≤ 40V | 3 | ||
| Line Regulation (●) | 8 | ppm/V | ● full operating temperature range | 3 | |||
| Load Regulation, sourcing current | -8 | -3 | 6 | ppm/mA | Sourcing Current | 3 | |
| Load Regulation, sourcing current (●) | -10 | 8 | ppm/mA | ● 0 ≤ IOUT ≤ 15mA | 3 | ||
| Load Regulation, sinking current (●) | 30 | 120 | ppm/mA | ● 0 ≥ IOUT ≥ -10mA | 3 | ||
| Supply Current | 2.2 | 3.1 | mA | 3 | |||
| Supply Current (●) | 3.5 | mA | ● full operating temperature range | 3 | |||
| VTRIM Adjust Range (●) | -30 | 30 | mV | ● full operating temperature range | 3 | ||
| VTRIM Adjust Range (●), second printed value | -50 | 50 | mV | ● full operating temperature range | 3 | ||
| Output Noise, 0.1Hz to 10Hz | en | 3 | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 | ||
| Output Noise, 10Hz to 1kHz | en | 2 | 6 | µVRMS | 10Hz ≤ f ≤ 1kHz | 3 | |
| Supply Voltage (VIN) | VIN | 40 | V | 2 | |||
| Input-Output Voltage Differential | 35 | V | 2 | ||||
| Output to Ground Voltage | 7 | V | 2 | ||||
| VTRIM to Ground Voltage, positive | VTRIM | 5 | V | 2 | |||
| VTRIM to Ground Voltage, negative | VTRIM | -0.3 | V | 2 | |||
| Output Short-Circuit Duration | 10 | sec | VIN > 20V | 2 | |||
| Operating Temperature Range (LT1027C) | 0 | 70 | °C | LT1027C | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | All devices | 2 | ||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 100 | °C | S8 package | 2 | ||
| Thermal Resistance, junction-to-ambient | θJA | 180 | °C/W | S8 package | 2 |
CAD (KiCad official)
- Symbol:
LT1027CCS8-5#TRPBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1027ccs8-5-trpbf-etched.step/lt1027ccs8-5-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1027ccs8-5-trpbf.step/lt1027ccs8-5-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (8 pp, sha256
2d0d683b94e97559, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1027CCS8-5#TRPBF
**Analog Devices** · Voltage Reference · SO-8
LT1027CCS8-5#TRPBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Supply input; the supply voltage (VIN) absolute maximum is 40V and the input-output differential is limited to 35V. |
| 2 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 3 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 4 | NC | unconnected | Connected internally; do not connect external circuitry to this pin. |
| 5 | VOUT | power_out | 5V reference output that sources up to 15mA and sinks up to 10mA; output-to-ground voltage is limited to 7V, and short-circuit duration is 10 sec when VIN > 20V or indefinite when VIN ≤ 20V. |
| 6 | VTRIM | input | Output voltage trim pin (about 20kΩ impedance, 2.5V open-circuit); VTRIM-to-ground is limited to +5V positive and -0.3V negative, with a ±30mV guaranteed trim range. |
| 7 | GND | power_in | Ground return; the ground pin carries only 2mA and can be used as a low-side Kelvin sense line. |
| 8 | NR | passive | Noise reduction pin (positive input of the internal scaling amplifier) for a 1µF low-leakage Mylar capacitor to ground; it is the most sensitive pin, and 100nA of leakage causes a 150ppm output error. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage (LT1027B, C, D) | VOUT | 4.9975 | 5 | 5.0025 | V | | 2 |
| Output Voltage Temperature Coefficient (LT1027C) | TCVOUT | | 2 | 3 | ppm/°C | ● full operating temperature range | 2 |
| Line Regulation | | | 6 | 12 | ppm/V | 8V ≤ VIN ≤ 10V | 3 |
| Line Regulation (●) | | | | 25 | ppm/V | ● full operating temperature range | 3 |
| Line Regulation | | | 3 | 6 | ppm/V | 10V ≤ VIN ≤ 40V | 3 |
| Line Regulation (●) | | | | 8 | ppm/V | ● full operating temperature range | 3 |
| Load Regulation, sourcing current | | -8 | -3 | 6 | ppm/mA | Sourcing Current | 3 |
| Load Regulation, sourcing current (●) | | -10 | | 8 | ppm/mA | ● 0 ≤ IOUT ≤ 15mA | 3 |
| Load Regulation, sinking current (●) | | 30 | | 120 | ppm/mA | ● 0 ≥ IOUT ≥ -10mA | 3 |
| Supply Current | | | 2.2 | 3.1 | mA | | 3 |
| Supply Current (●) | | | | 3.5 | mA | ● full operating temperature range | 3 |
| VTRIM Adjust Range (●) | | -30 | | 30 | mV | ● full operating temperature range | 3 |
| VTRIM Adjust Range (●), second printed value | | -50 | | 50 | mV | ● full operating temperature range | 3 |
| Output Noise, 0.1Hz to 10Hz | en | | 3 | | µVP-P | 0.1Hz ≤ f ≤ 10Hz | 3 |
| Output Noise, 10Hz to 1kHz | en | | 2 | 6 | µVRMS | 10Hz ≤ f ≤ 1kHz | 3 |
| Supply Voltage (VIN) | VIN | | | 40 | V | | 2 |
| Input-Output Voltage Differential | | | | 35 | V | | 2 |
| Output to Ground Voltage | | | | 7 | V | | 2 |
| VTRIM to Ground Voltage, positive | VTRIM | | | 5 | V | | 2 |
| VTRIM to Ground Voltage, negative | VTRIM | -0.3 | | | V | | 2 |
| Output Short-Circuit Duration | | | | 10 | sec | VIN > 20V | 2 |
| Operating Temperature Range (LT1027C) | | 0 | | 70 | °C | LT1027C | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | All devices | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Maximum Junction Temperature | TJMAX | | | 100 | °C | S8 package | 2 |
| Thermal Resistance, junction-to-ambient | θJA | | 180 | | °C/W | S8 package | 2 |
## CAD (KiCad official)
- Symbol: `LT1027CCS8-5#TRPBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt1027ccs8-5-trpbf-etched.step` / `lt1027ccs8-5-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1027ccs8-5-trpbf.step` / `lt1027ccs8-5-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588915515066888192) (8 pp, sha256 `2d0d683b94e97559`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1027ccs8-5-trpbf-datasheet.pdf)