main
Ray
Publish 0.1.0
b6f7c8e
LT1014DMDWREP
Texas Instruments · Precision OpAmps · SOIC-16-300mil
LT1014DMDWREP from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Amplifier 1 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
| 2 | 1IN− | input | Amplifier 1 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 3 | 1IN+ | input | Amplifier 1 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 4 | VCC+ | power_in | Positive supply for all four amplifiers, with a minimum operating supply of 3.4 V and a supply voltage absolute maximum of ±22 V. |
| 5 | 2IN+ | input | Amplifier 2 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 6 | 2IN− | input | Amplifier 2 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 7 | 2OUT | output | Amplifier 2 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | 3OUT | output | Amplifier 3 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
| 11 | 3IN− | input | Amplifier 3 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 12 | 3IN+ | input | Amplifier 3 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 13 | VCC-/GND | power_in | Negative supply or ground for all four amplifiers, which is tied to 0 V for single-supply operation, and the supply voltage absolute maximum is ±22 V. |
| 14 | 4IN+ | input | Amplifier 4 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 15 | 4IN− | input | Amplifier 4 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 16 | 4OUT | output | Amplifier 4 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Operational Amplifier/Comparator |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | -22 | 22 | V | 3 | ||
| Differential input voltage | -30 | 30 | V | 3 | |||
| Operating temperature range | TA | -55 | 125 | °C | 3 | ||
| Storage temperature range | Tstg | -65 | 150 | °C | 3 | ||
| Lead temperature | 260 | °C | 1,6 mm, at distance 1/16 inch from case for 10s | 3 | |||
| Power rating, DW package | 1025 | mV | TA ≤ 25°C (printed as 1025 mV) | 3 | |||
| Power rating, DW package | 656 | mW | TA = 70°C | 3 | |||
| Power rating, DW package | 369 | mW | TA = 105°C | 3 | |||
| Power rating, DW package | 205 | mW | TA = 125°C | 3 | |||
| Input offset voltage | VIO | 90 | 450 | µV | 25°C, RS = 50 Ω | 3 | |
| Input offset voltage | VIO | 400 | 1500 | µV | Full range | 3 | |
| Input offset voltage | VIO | 200 | 750 | µV | 125°C, RS = 50 Ω, VIC = 0.1 V | 3 | |
| Input offset current | IIO | 0.2 | 2 | nA | 25°C | 3 | |
| Input offset current | IIO | 10 | nA | Full range | 3 | ||
| Input bias current | IIB | -15 | -50 | nA | 25°C | 3 | |
| Input bias current | IIB | -120 | nA | Full range | 3 | ||
| Common-mode input voltage range | VICR | 0 | 3.5 | V | 25°C | 3 | |
| Common-mode input voltage range | VICR | 0.1 | 3 | V | Full range | 3 | |
| Maximum peak output voltage swing, output low | VOM | 15 | 25 | mV | 25°C, output low, no load | 3 | |
| Maximum peak output voltage swing, output low | VOM | 5 | 10 | mV | 25°C, output low, RL = 600 Ω to GND | 3 | |
| Maximum peak output voltage swing, output low | VOM | 18 | mV | Full range, output low, RL = 600 Ω to GND | 3 | ||
| Maximum peak output voltage swing, output low | VOM | 220 | 350 | mV | 25°C, output low, ISINK = 1 mA | 3 | |
| Maximum peak output voltage swing, output high | VOM | 4 | 4.4 | V | 25°C, output high, no load | 3 | |
| Maximum peak output voltage swing, output high | VOM | 3.4 | 4 | V | 25°C, output high, RL = 600 Ω to GND | 3 | |
| Maximum peak output voltage swing, output high | VOM | 3.1 | V | Full range, output high, RL = 600 Ω to GND | 3 | ||
| Large-signal differential voltage amplification | AVD | 1 | V/µV | 25°C, VO = 5 mV to 4 V, RL = 500 Ω | 3 | ||
| Supply current per amplifier | ICC | 0.3 | 0.5 | mA | 25°C | 3 | |
| Supply current per amplifier | ICC | 0.65 | mA | Full range | 3 | ||
| Slew rate | SR | 0.2 | 0.4 | V/µs | 4 | ||
| Equivalent input noise voltage | Vn | 24 | nV/√Hz | f = 10 Hz | 4 | ||
| Equivalent input noise voltage | Vn | 22 | nV/√Hz | f = 1kHz | 4 | ||
| Peak-to-peak equivalent input noise voltage | VN(PP) | 0.55 | µV | f = 0.1 Hz to 10 Hz | 4 | ||
| Equivalent input noise current | In | 0.07 | pA/√Hz | f = 10 Hz | 4 | ||
| Power dissipation derating factor, DW package | 8.2 | mW/°C | above TA = 25°C | 3 |
CAD (KiCad official)
- Symbol:
LT1014DMDWREP - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
lt1014dmdwrep-etched.step/lt1014dmdwrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1014dmdwrep.step/lt1014dmdwrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (25 pp, sha256
380445dc7df1ff52, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT1014DMDWREP
**Texas Instruments** · Precision OpAmps · SOIC-16-300mil
LT1014DMDWREP from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OUT | output | Amplifier 1 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
| 2 | 1IN− | input | Amplifier 1 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 3 | 1IN+ | input | Amplifier 1 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 4 | VCC+ | power_in | Positive supply for all four amplifiers, with a minimum operating supply of 3.4 V and a supply voltage absolute maximum of ±22 V. |
| 5 | 2IN+ | input | Amplifier 2 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 6 | 2IN− | input | Amplifier 2 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 7 | 2OUT | output | Amplifier 2 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
| 8 | NC | unconnected | No internal connection. |
| 9 | NC | unconnected | No internal connection. |
| 10 | 3OUT | output | Amplifier 3 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
| 11 | 3IN− | input | Amplifier 3 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 12 | 3IN+ | input | Amplifier 3 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 13 | VCC-/GND | power_in | Negative supply or ground for all four amplifiers, which is tied to 0 V for single-supply operation, and the supply voltage absolute maximum is ±22 V. |
| 14 | 4IN+ | input | Amplifier 4 noninverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 15 | 4IN− | input | Amplifier 4 inverting input, with a voltage range of VCC- - 5 V to VCC+ and a differential input limit of ±30 V. |
| 16 | 4OUT | output | Amplifier 4 output, which can swing to within a few millivolts of ground and can be shorted to either supply at TA ≤ 25°C. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Operational Amplifier/Comparator |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC supply voltage | VCC | -22 | | 22 | V | | 3 |
| Differential input voltage | | -30 | | 30 | V | | 3 |
| Operating temperature range | TA | -55 | | 125 | °C | | 3 |
| Storage temperature range | Tstg | -65 | | 150 | °C | | 3 |
| Lead temperature | | | | 260 | °C | 1,6 mm, at distance 1/16 inch from case for 10s | 3 |
| Power rating, DW package | | | | 1025 | mV | TA ≤ 25°C (printed as 1025 mV) | 3 |
| Power rating, DW package | | | | 656 | mW | TA = 70°C | 3 |
| Power rating, DW package | | | | 369 | mW | TA = 105°C | 3 |
| Power rating, DW package | | | | 205 | mW | TA = 125°C | 3 |
| Input offset voltage | VIO | | 90 | 450 | µV | 25°C, RS = 50 Ω | 3 |
| Input offset voltage | VIO | | 400 | 1500 | µV | Full range | 3 |
| Input offset voltage | VIO | | 200 | 750 | µV | 125°C, RS = 50 Ω, VIC = 0.1 V | 3 |
| Input offset current | IIO | | 0.2 | 2 | nA | 25°C | 3 |
| Input offset current | IIO | | | 10 | nA | Full range | 3 |
| Input bias current | IIB | | -15 | -50 | nA | 25°C | 3 |
| Input bias current | IIB | | | -120 | nA | Full range | 3 |
| Common-mode input voltage range | VICR | 0 | | 3.5 | V | 25°C | 3 |
| Common-mode input voltage range | VICR | 0.1 | | 3 | V | Full range | 3 |
| Maximum peak output voltage swing, output low | VOM | | 15 | 25 | mV | 25°C, output low, no load | 3 |
| Maximum peak output voltage swing, output low | VOM | | 5 | 10 | mV | 25°C, output low, RL = 600 Ω to GND | 3 |
| Maximum peak output voltage swing, output low | VOM | | | 18 | mV | Full range, output low, RL = 600 Ω to GND | 3 |
| Maximum peak output voltage swing, output low | VOM | | 220 | 350 | mV | 25°C, output low, ISINK = 1 mA | 3 |
| Maximum peak output voltage swing, output high | VOM | 4 | 4.4 | | V | 25°C, output high, no load | 3 |
| Maximum peak output voltage swing, output high | VOM | 3.4 | 4 | | V | 25°C, output high, RL = 600 Ω to GND | 3 |
| Maximum peak output voltage swing, output high | VOM | 3.1 | | | V | Full range, output high, RL = 600 Ω to GND | 3 |
| Large-signal differential voltage amplification | AVD | 1 | | | V/µV | 25°C, VO = 5 mV to 4 V, RL = 500 Ω | 3 |
| Supply current per amplifier | ICC | | 0.3 | 0.5 | mA | 25°C | 3 |
| Supply current per amplifier | ICC | | | 0.65 | mA | Full range | 3 |
| Slew rate | SR | | 0.2 | 0.4 | V/µs | | 4 |
| Equivalent input noise voltage | Vn | | 24 | | nV/√Hz | f = 10 Hz | 4 |
| Equivalent input noise voltage | Vn | | 22 | | nV/√Hz | f = 1kHz | 4 |
| Peak-to-peak equivalent input noise voltage | VN(PP) | | 0.55 | | µV | f = 0.1 Hz to 10 Hz | 4 |
| Equivalent input noise current | In | | 0.07 | | pA/√Hz | f = 10 Hz | 4 |
| Power dissipation derating factor, DW package | | | 8.2 | | mW/°C | above TA = 25°C | 3 |
## CAD (KiCad official)
- Symbol: `LT1014DMDWREP`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `lt1014dmdwrep-etched.step` / `lt1014dmdwrep-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt1014dmdwrep.step` / `lt1014dmdwrep.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/lt1014d-ep) (25 pp, sha256 `380445dc7df1ff52`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt1014dmdwrep-datasheet.pdf)