LT1013CP

{
  "slug": "lt1013cp",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Precision Op Amps, DIP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "amplifiers-comparators",
    "lt1013cp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt1013cp.kicad_sym",
    "lt1013cp.kicad_mod",
    "lt1013cp.glb",
    "lt1013cp.step",
    "lt1013cp.lbr",
    "docs/hero.png",
    "docs/lt1013cp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt1013cp-hero.glb",
    "lt1013cp-hero.overlay.json"
  ],
  "component": {
    "mpn": "LT1013CP",
    "manufacturer": "Texas Instruments",
    "package": "DIP-8",
    "pin_count": 8,
    "category": "Amplifiers/Comparators",
    "subcategory": "Precision Op Amps",
    "datasheet": "https://www.ti.com/cn/lit/gpn/lt1013",
    "parts": {
      "symbol": "lt1013cp.kicad_sym",
      "footprint": "lt1013cp.kicad_mod",
      "model_3d": "lt1013cp-hero.glb",
      "model_3d_plain": "lt1013cp.glb",
      "model_3d_step": "lt1013cp-etched.step",
      "model_3d_step_plain": "lt1013cp.step",
      "lbr": "lt1013cp.lbr"
    },
    "distributor_links": {
      "lcsc": "C50523",
      "digikey": "296-1399-5-ND",
      "mouser": "595-LT1013CP"
    },
    "distributor_check": {
      "checked_at": "2026-10-07T23:03:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-1399-5-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-LT1013CP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "1OUT",
        "type": "output",
        "description": "Output for channel 1; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C."
      },
      {
        "number": "2",
        "name": "1IN–",
        "type": "input",
        "description": "Inverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."
      },
      {
        "number": "3",
        "name": "1IN+",
        "type": "input",
        "description": "Noninverting input for channel 1; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."
      },
      {
        "number": "4",
        "name": "VCC–",
        "type": "power_in",
        "description": "Negative supply voltage; the device is specified for supply voltage VCC+ - VCC- of 5 V to 30 V recommended, and can operate from a single 5-V supply or dual ±15-V supplies."
      },
      {
        "number": "5",
        "name": "2IN+",
        "type": "input",
        "description": "Noninverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."
      },
      {
        "number": "6",
        "name": "2IN–",
        "type": "input",
        "description": "Inverting input for channel 2; any input voltage must stay between VCC- - 5 V and VCC+ V per the absolute maximum ratings, and differential input voltage is limited to ±30 V."
      },
      {
        "number": "7",
        "name": "2OUT",
        "type": "output",
        "description": "Output for channel 2; the output may be shorted to either supply, with short-circuit duration unlimited at or below 25°C."
      },
      {
        "number": "8",
        "name": "VCC+",
        "type": "power_in",
        "description": "Positive supply voltage; the absolute maximum supply voltage VCC+ - VCC- is 44 V, and the recommended range is 5 V to 30 V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet's pin function table gives no electrical type for the supply pins (shown as '—'). VCC+; The pin-number mapping comes from the 'LT1013 and LT1013D P Package, 8-Pin CDIP or PDIP' top view an"
        ],
        "pages_sent": 9,
        "cost_usd": 0.0579,
        "at": "2026-10-07T23:03:43"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/lt1013",
        "pages": 38,
        "sha256": "2d0a7a135db528c5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 8,
        "described": 8,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt1013cp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "4a377a56a8d9e9c0b86c095ef9ecc1869ac19e7f5069a3247b294250bf4f235d",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt1013cp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          9.27,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "045ecc860a94730c42778333db38529cd2b7aca6f13394ae9e3e8e7b97459731",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}