3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT1004CS8-2.5#PBF
Analog Devices · Voltage References · SO-8
LT1004CS8-2.5#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | No connect pin with no internal function stated in the datasheet. |
| 2 | NC | unconnected | No connect pin with no internal function stated in the datasheet. |
| 3 | NC | unconnected | No connect pin with no internal function stated in the datasheet. |
| 4 | GND | power_in | Ground (anode) terminal of the 2-terminal reference diode. |
| 5 | NC | unconnected | No connect pin marked DO NOT USE in the datasheet. |
| 6 | VOUT | passive | Reference voltage (cathode) terminal, 2.5V typical reverse breakdown, tied to pin 8 on the package. |
| 7 | NC | unconnected | No connect pin with no internal function stated in the datasheet. |
| 8 | VOUT | passive | Reference voltage (cathode) terminal, 2.5V typical reverse breakdown, tied to pin 6 on the package. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reverse Breakdown Voltage (0°C to 70°C) | VZ | 2.47 | 2.5 | 2.53 | V | IR = 100µA, 0°C ≤ TA ≤ 70°C | 3 |
| Reverse Breakdown Voltage (25°C) | VZ | 2.48 | 2.5 | 2.52 | V | IR = 100µA, TA = 25°C | 3 |
| Average Temperature Coefficient | ∆VZ/∆Temp | 20 | ppm/°C | IMIN ≤ IR ≤ 20mA (Note 3) | 3 | ||
| Minimum Operating Current | IMIN | 8 | 10 | µA | C, I suffixes; full operating temperature range (●) | 3 | |
| Reverse Breakdown Voltage Change with Current | ∆VZ/∆IR | 1 | 1.5 | mV | IMIN ≤ IR ≤ 1mA | 3 | |
| Reverse Breakdown Voltage Change with Current | ∆VZ/∆IR | 10 | 20 | mV | 1mA ≤ IR ≤ 20mA | 3 | |
| Reverse Dynamic Impedance | rZ | 0.2 | 0.6 | 1.5 | Ω | IR = 100µA | 3 |
| Wide Band Noise (RMS) | en | 60 | 120 | µV | IR = 100µA, 10Hz ≤ f ≤ 10kHz | 3 | |
| Long Term Stability | ∆VZ/∆Time | 20 | ppm/kHr | IR = 100µA, TA = 25°C ± 0.1°C | 3 | ||
| Operating Temperature Range (LT1004C) | TA | 0 | 70 | °C | LT1004C grade (CS8 suffix) | 2 | |
| Forward Current | IF | 10 | mA | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | TLEAD | 300 | °C | 10 sec soldering | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | S8 package | 2 | ||
| Thermal Resistance, Junction to Ambient | θJA | 120 | °C/W | S8 package | 2 |
CAD (KiCad official)
- Symbol:
LT1004CS8-2.5#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt1004cs8-2-5-pbf-etched.step/lt1004cs8-2-5-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt1004cs8-2-5-pbf.step/lt1004cs8-2-5-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
90469034ed2ed3a7, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).