component
LSP5526-S8A
Public Made by Adomby adom
Diodes Incorporated DC-DC Converters, SOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LSP5526-S8A
Diodes Incorporated · DC-DC Converters · SOP-8
LSP5526-S8A from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | power_out | Bootstrap pin that acts as the positive rail for the high-side switch gate driver; connect a 0.01uF capacitor between BS and SW. |
| 2 | VIN | power_in | Input supply pin that should be bypassed to GND with a low ESR capacitor placed close to the pin. |
| 3 | SW | output | Switch output pin that connects to the switching end of the inductor. |
| 4 | GND | power_in | Ground pin. |
| 5 | FB | input | Feedback input regulated to 0.925V; connect to the resistor divider between output and ground to set the output voltage. |
| 6 | COMP | passive | Compensation pin for the error amplifier; stability compensation network is connected here (RCOMP, CCOMP1, and CCOMP2 if a high ESR output capacitor is used). |
| 7 | EN | input | Enable input: above 2.7V turns the IC on, below 1.1V turns it off, and it should not be left open. |
| 8 | SS | input | Soft-start control input; a capacitor from SS to GND sets the soft-start period (0.1uF gives 15ms), and leaving SS unconnected disables soft-start. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 0.9 | 0.925 | 0.95 | V | 4.5V ≤VIN ≤23V | 5 |
| High-Side Switch Leakage | 10 | uA | VEN = 0V, VSW = 0V | 5 | |||
| Upper Switch Current Limit | 2.7 | 3.5 | A | Minimum Duty Cycle | 5 | ||
| EN Shutdown Threshold Voltage | 1.1 | 1.4 | 2 | V | VEN Rising | 5 | |
| EN Lockout Threshold Voltage | 2.2 | 2.5 | 2.7 | V | 5 | ||
| Supply Current in Shutdown | 0.3 | 3 | uA | VEN = 0 | 5 | ||
| IC Supply Current in Operation | 1.3 | 1.5 | mA | VEN = 3V, VFB = 1.0V | 5 | ||
| Input UVLO Threshold Rising | UVLO | 3.8 | 4.05 | 4.4 | V | VEN Rising | 5 |
| Input Supply Voltage | 4.5 | 23 | V | 4 | |||
| Operating Junction Temperature | -20 | 125 | °C | 4 | |||
| Input Supply Voltage | -0.3 | 25 | V | TA=25°C | 4 | ||
| SW Voltage | -0.3 | V | TA=25°C | 4 | |||
| EN Voltage | -0.3 | 8 | V | TA=25°C | 4 | ||
| FB, COMP Voltage | -0.3 | 5 | V | TA=25°C | 4 | ||
| Maximum Junction Temperature | 150 | °C | TA=25°C | 4 | |||
| Storage Temperature Range | -65 | 150 | °C | TA=25°C | 4 | ||
| SOP-8L Thermal Resistance (Junction to Case) | 60 | °C/W | 4 | ||||
| SOP-8L Thermal Resistance (Junction to Ambient) | 150 | °C/W | 4 | ||||
| SOP-8L Power dissipation | 810 | mW | TA=25°C | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.076 grams (Approximate) | 16 |
CAD (KiCad official)
- Symbol:
LSP5526-S8A - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
lsp5526-s8a-etched.step/lsp5526-s8a-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lsp5526-s8a.step/lsp5526-s8a.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (17 pp, sha256
5a2d7af97b50ac58, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LSP5526-S8A
**Diodes Incorporated** · DC-DC Converters · SOP-8
LSP5526-S8A from Diodes Incorporated, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BS | power_out | Bootstrap pin that acts as the positive rail for the high-side switch gate driver; connect a 0.01uF capacitor between BS and SW. |
| 2 | VIN | power_in | Input supply pin that should be bypassed to GND with a low ESR capacitor placed close to the pin. |
| 3 | SW | output | Switch output pin that connects to the switching end of the inductor. |
| 4 | GND | power_in | Ground pin. |
| 5 | FB | input | Feedback input regulated to 0.925V; connect to the resistor divider between output and ground to set the output voltage. |
| 6 | COMP | passive | Compensation pin for the error amplifier; stability compensation network is connected here (RCOMP, CCOMP1, and CCOMP2 if a high ESR output capacitor is used). |
| 7 | EN | input | Enable input: above 2.7V turns the IC on, below 1.1V turns it off, and it should not be left open. |
| 8 | SS | input | Soft-start control input; a capacitor from SS to GND sets the soft-start period (0.1uF gives 15ms), and leaving SS unconnected disables soft-start. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Voltage | VFB | 0.9 | 0.925 | 0.95 | V | 4.5V ≤VIN ≤23V | 5 |
| High-Side Switch Leakage | | | | 10 | uA | VEN = 0V, VSW = 0V | 5 |
| Upper Switch Current Limit | | 2.7 | 3.5 | | A | Minimum Duty Cycle | 5 |
| EN Shutdown Threshold Voltage | | 1.1 | 1.4 | 2 | V | VEN Rising | 5 |
| EN Lockout Threshold Voltage | | 2.2 | 2.5 | 2.7 | V | | 5 |
| Supply Current in Shutdown | | | 0.3 | 3 | uA | VEN = 0 | 5 |
| IC Supply Current in Operation | | | 1.3 | 1.5 | mA | VEN = 3V, VFB = 1.0V | 5 |
| Input UVLO Threshold Rising | UVLO | 3.8 | 4.05 | 4.4 | V | VEN Rising | 5 |
| Input Supply Voltage | | 4.5 | | 23 | V | | 4 |
| Operating Junction Temperature | | -20 | | 125 | °C | | 4 |
| Input Supply Voltage | | -0.3 | | 25 | V | TA=25°C | 4 |
| SW Voltage | | -0.3 | | | V | TA=25°C | 4 |
| EN Voltage | | -0.3 | | 8 | V | TA=25°C | 4 |
| FB, COMP Voltage | | -0.3 | | 5 | V | TA=25°C | 4 |
| Maximum Junction Temperature | | | | 150 | °C | TA=25°C | 4 |
| Storage Temperature Range | | -65 | | 150 | °C | TA=25°C | 4 |
| SOP-8L Thermal Resistance (Junction to Case) | | | 60 | | °C/W | | 4 |
| SOP-8L Thermal Resistance (Junction to Ambient) | | | 150 | | °C/W | | 4 |
| SOP-8L Power dissipation | | | 810 | | mW | TA=25°C | 4 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | | tin | Terminals: Finish, Matte Tin Plated Leads, Solderable per MIL-STD-202, Method 208 Weight: 0.076 grams (Approximate) | 16 |
## CAD (KiCad official)
- Symbol: `LSP5526-S8A`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files: `lsp5526-s8a-etched.step` / `lsp5526-s8a-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lsp5526-s8a.step` / `lsp5526-s8a.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603047709780041728) (17 pp, sha256 `5a2d7af97b50ac58`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lsp5526-s8a-datasheet.pdf)