LSM6DSV32XTR

{
  "slug": "lsm6dsv32xtr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMICROELECTRONICS Global Sourcing Parts, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "lsm6dsv32xtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lsm6dsv32xtr.kicad_sym",
    "lsm6dsv32xtr.kicad_mod",
    "lsm6dsv32xtr.glb",
    "lsm6dsv32xtr.step",
    "lsm6dsv32xtr.lbr",
    "docs/hero.png",
    "docs/lsm6dsv32xtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lsm6dsv32xtr-hero.glb",
    "lsm6dsv32xtr-hero.overlay.json",
    "lsm6dsv32xtr-etched.glb"
  ],
  "component": {
    "mpn": "LSM6DSV32XTR",
    "manufacturer": "STMICROELECTRONICS",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603009365653659648",
    "parts": {
      "symbol": "lsm6dsv32xtr.kicad_sym",
      "footprint": "lsm6dsv32xtr.kicad_mod",
      "model_3d": "lsm6dsv32xtr-hero.glb",
      "model_3d_plain": "lsm6dsv32xtr-etched.glb",
      "model_3d_step": "lsm6dsv32xtr-etched.step",
      "model_3d_step_plain": "lsm6dsv32xtr.step",
      "lbr": "lsm6dsv32xtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C22461202"
    },
    "distributor_check": {
      "checked_at": "2026-10-17T15:01:56Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "quota"
      },
      "mouser": {
        "pn": null,
        "status": "quota"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "bidirectional",
        "description": "Serves as SPI 4-wire serial data output (SDO) or as the I²C/MIPI I3C least significant bit of the device address (SA0), tied to Vdd_IO for address 1101011b or to GND for 1101010b; the default is an input without pull-up unless SDO_PU_EN is set."
      },
      {
        "number": "2",
        "name": "SDx/AH1/Qvar1",
        "type": "bidirectional",
        "description": "Connect to Vdd_IO or GND when the analog hub and Qvar are disabled, otherwise it is analog hub input 1 or Qvar electrode 1 (mode 1, I²C only), carries MSDA in mode 2, and carries SDI_Aux (with SDO_Aux in 3-wire) in mode 3."
      },
      {
        "number": "3",
        "name": "SCx/AH2/Qvar2",
        "type": "bidirectional",
        "description": "Connect to Vdd_IO or GND when the analog hub and Qvar are disabled, otherwise it is analog hub input 2 or Qvar electrode 2 (mode 1, I²C only), carries MSCL in mode 2, and carries the auxiliary SPI clock SPC_Aux in mode 3."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "output",
        "description": "Programmable interrupt 1 output for I²C and SPI, forced to ground by default."
      },
      {
        "number": "5",
        "name": "Vdd_IO",
        "type": "power_in",
        "description": "Power supply for the I/O pins, with a 100 nF filter capacitor recommended and an extended range of 1.08 V to 3.6 V."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "8",
        "name": "Vdd",
        "type": "power_in",
        "description": "Power supply for the device core, with an analog supply range of 1.71 V to 3.6 V and a 100 nF decoupling capacitor placed as near as possible to the pin."
      },
      {
        "number": "9",
        "name": "INT2",
        "type": "bidirectional",
        "description": "Programmable interrupt 2 (INT2) or data enable (DEN), and in mode 2 also the I²C master external synchronization input (MDRDY); forced to ground by default."
      },
      {
        "number": "10",
        "name": "OCS_Aux",
        "type": "input",
        "description": "Connect to Vdd_IO or leave unconnected in modes 1 and 2, and in mode 3 it enables the auxiliary SPI 3/4-wire interface."
      },
      {
        "number": "11",
        "name": "SDO_Aux",
        "type": "bidirectional",
        "description": "Connect to Vdd_IO or leave unconnected in modes 1 and 2, and in mode 3 it is the auxiliary SPI 4-wire serial data output (leave unconnected for 3-wire operation)."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "I²C/SPI mode selection: high selects SPI idle mode with I²C enabled, low selects SPI communication mode with I²C disabled; it has an internal pull-up that is disabled when I2C_I3C_disable = 1."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "input",
        "description": "I²C/MIPI I3C serial clock (SCL) or SPI serial port clock (SPC), which must be pulled up to Vdd_IO externally when used as I²C."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I²C/MIPI I3C serial data (SDA) line, which must be pulled up to Vdd_IO externally, or SPI serial data input (SDI), or 3-wire SPI serial data output (SDO)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin functions change with the connection mode (mode 1, 2 or 3) and several pins are input or output ; Table 23 gives default pin states (input with or without pull-up, output forced to ground) that depe; The text gives pin numbers and names but not the physical position of each pad on the LGA-14 land gr"
        ],
        "pages_sent": 30,
        "cost_usd": 0.1199,
        "at": "2026-10-17T15:00:03"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603009365653659648",
        "pages": 198,
        "sha256": "aaa818cafdb8a0ad",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lsm6dsv32xtr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lsm6dsv32xtr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1002de1d809bae57678a3b7f225ae6c06857f770cfffb6959397ba92d9226fc6",
        "checked": "2026-10-17",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}