← Commit history

lsm6dsv16xtr: factory component page (tier=lcsc)

Ray ·da3a5d1dbf · ·parent b6e7b26
1 file changed +152−8
page.json+152−8
@@ -1,13 +1,162 @@ {+  "schema_version": 1,+  "type": "component",   "slug": "lsm6dsv16xtr",+  "title": "LSM6DSV16XTR",+  "brief": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",   "version": "0.1.0",-  "type": "component",-  "description": "STMicroelectronics Attitude Sensor/Gyroscope, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "license": "CC-BY-SA-4.0",   "tags": [     "component",     "sensor",     "lsm6dsv16xtr"   ],+  "component": {+    "mpn": "LSM6DSV16XTR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensor",+    "subcategory": "Attitude Sensor/Gyroscope",+    "datasheet": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061516_STMicroelectronics-LSM6DSV16XTR_C5267406.pdf",+    "parts": {+      "symbol": "lsm6dsv16xtr.kicad_sym",+      "footprint": "lsm6dsv16xtr.kicad_mod",+      "model_3d": "lsm6dsv16xtr.glb",+      "model_3d_step": "lsm6dsv16xtr.step",+      "lbr": "lsm6dsv16xtr.lbr"+    },+    "distributor_links": {},+    "pins": [+      {+        "number": "1",+        "name": "SDO/SA0",+        "type": "bidirectional",+        "description": "SPI 4-wire interface serial data output (SDO) or I2C least-significant bit of the device address (SA0). Function selected by the active serial interface."+      },+      {+        "number": "2",+        "name": "SDx/AH1/Qvar1",+        "type": "bidirectional",+        "description": "Mode 1: analog hub input 1 (AH1) or Qvar electrode 1 when analog hub / Qvar is enabled; tie to Vdd_IO or GND if unused. Mode 2: I2C serial data master (MSDA). Mode 3: auxiliary SPI 3/4-wire serial data input (SDI_Aux) and 3-wire output (SDO_Aux)."+      },+      {+        "number": "3",+        "name": "SCx/AH2/Qvar2",+        "type": "bidirectional",+        "description": "Mode 1: analog hub input 2 (AH2) or Qvar electrode 2 when analog hub / Qvar is enabled; tie to Vdd_IO or GND if unused. Mode 2: I2C serial clock master (MSCL). Mode 3: auxiliary SPI 3/4-wire serial port clock (SPC_Aux)."+      },+      {+        "number": "4",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt 1, available in both I2C and SPI modes. Used for host-side event notification (data-ready, motion, free-fall, wake-up, FSM/MLC output, etc.)."+      },+      {+        "number": "5",+        "name": "Vdd_IO",+        "type": "power_in",+        "description": "Power supply for the digital I/O pins. Extended range 1.08 V to 3.6 V. Recommended 100 nF decoupling capacitor."+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "0 V supply (ground reference). Connect to system ground."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "0 V supply (ground reference). Connect to system ground."+      },+      {+        "number": "8",+        "name": "Vdd",+        "type": "power_in",+        "description": "Analog supply voltage: 1.71 V to 3.6 V (typ. 1.8 V). Recommended 100 nF decoupling capacitor."+      },+      {+        "number": "9",+        "name": "INT2",+        "type": "bidirectional",+        "description": "Programmable interrupt 2 (INT2) / data enable (DEN). In Mode 2, also functions as I2C master external synchronization signal (MDRDY). Direction depends on the selected function."+      },+      {+        "number": "10",+        "name": "OCS_Aux",+        "type": "input",+        "description": "Mode 1 & 2: connect to Vdd_IO or leave electrically unconnected. Mode 3: enable for the auxiliary SPI 3/4-wire interface (active-low chip select for aux SPI)."+      },+      {+        "number": "11",+        "name": "SDO_Aux",+        "type": "output",+        "description": "Mode 1 & 2: connect to Vdd_IO or leave electrically unconnected. Mode 3: auxiliary SPI 4-wire serial data output (SDO_Aux); leave unconnected when the auxiliary SPI is used in 3-wire mode."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "I2C / MIPI I3C / SPI mode selection (active-low chip select). CS = 1: SPI idle mode and I2C / MIPI I3C communication enabled. CS = 0: SPI communication enabled and I2C / MIPI I3C disabled."+      },+      {+        "number": "13",+        "name": "SCL",+        "type": "input",+        "description": "I2C / MIPI I3C serial clock (SCL) or SPI serial port clock (SPC). Shared clock line for the primary serial interface."+      },+      {+        "number": "14",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I2C / MIPI I3C serial data (SDA), SPI serial data input (SDI), or 3-wire SPI serial data output (SDO). Direction depends on the active protocol and transfer phase."+      }+    ],+    "provenance": {+      "extractor": "ds2sf",+      "datasheet": {+        "url": "https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2309061516_STMicroelectronics-LSM6DSV16XTR_C5267406.pdf",+        "pages": 198,+        "sha256": "ec53c0e5952fc0c9",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "metadata": {+    "specs": {+      "Manufacturer": "STMicroelectronics",+      "Package": "LGA-14(2.5x3)",+      "Category": "Sensor",+      "Pins": "14"+    }+  },+  "sections": [+    "hero",+    "viewers",+    "readme",+    "breadcrumbs",+    "info"+  ],+  "discovery_triggers": [+    "lsm6dsv16xtr"+  ],+  "discovery_pitch": "LSM6DSV16XTR (STMicroelectronics) component page with datasheet-verified CAD.",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  },   "dependencies": {},   "hero": {     "type": "image",@@ -25,10 +174,5 @@     "docs/lsm6dsv16xtr-datasheet.pdf",     "viewers/symbol.html",     "viewers/footprint.html"-  ],-  "visibility": "public",-  "author": {-    "name": "Ray",-    "email": "[email protected]"-  }+  ] }\ No newline at end of file