← Commit history

Initial commit: component/lsm6dsv16bxtr

Ray ·2c7f5a9c14 ·
2 files changed +227
README.mdadded+50
@@ -0,0 +1,50 @@+# LSM6DSV16BXTR++**STMicroelectronics** · Accelerometers · LGA-14(2.5x3)++LSM6DSV16BXTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDO/SA0 | output | SPI 4-wire serial data output (SDO) or I²C device address least significant bit selection (SA0). |+| 2 | TDMout | output | TDM audio data output in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1. |+| 3 | BCLK | input | TDM bit clock input in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1. |+| 4 | INT1 | output | Programmable interrupt output for sensor events; available in both I²C and SPI modes. |+| 5 | Vdd_IO | power_in | Power supply for I/O pins (1.08 to 3.6 V); recommend 100 nF filter capacitor. |+| 6 | AH1/QVAR1 | input | Analog hub input 1 or Qvar electrode 1 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled. |+| 7 | GND | power_in | Ground supply (0 V). |+| 8 | Vdd | power_in | Core power supply (1.71 to 3.6 V); recommend 100 nF filter capacitor. |+| 9 | AH2/QVAR2 | input | Analog hub input 2 or Qvar electrode 2 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled. |+| 10 | INT2 | output | Programmable interrupt 2 output for sensor events; available in both I²C and SPI modes. |+| 11 | WCLK | input | TDM word clock input in Mode 2; connect to Vdd_IO or leave unconnected when TDM interface is not used in Mode 1. |+| 12 | CS | input | Communication mode selection: high enables SPI idle mode or I²C/MIPI I3C communication; low enables active SPI mode. |+| 13 | SCL | bidirectional | I²C/MIPI I3C serial clock (open-drain in I²C) or SPI serial port clock input. |+| 14 | SDA | bidirectional | I²C/MIPI I3C serial data (open-drain bidirectional), SPI serial data input (SDI) in 4-wire mode, or serial data output (SDO) in 3-wire mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `LSM6DSV16BXTR`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)+- 3D model files: `lsm6dsv16bxtr-etched.step` / `lsm6dsv16bxtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lsm6dsv16bxtr.step` / `lsm6dsv16bxtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906152630759424) (149 pp, sha256 `b68ff3a7d830e1a7`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lsm6dsv16bxtr-datasheet.pdf)
page.jsonadded+177
@@ -0,0 +1,177 @@+{+  "slug": "lsm6dsv16bxtr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "lsm6dsv16bxtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lsm6dsv16bxtr.kicad_sym",+    "lsm6dsv16bxtr.kicad_mod",+    "lsm6dsv16bxtr.glb",+    "lsm6dsv16bxtr.step",+    "lsm6dsv16bxtr.lbr",+    "docs/hero.png",+    "docs/lsm6dsv16bxtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LSM6DSV16BXTR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906152630759424",+    "parts": {+      "symbol": "lsm6dsv16bxtr.kicad_sym",+      "footprint": "lsm6dsv16bxtr.kicad_mod",+      "model_3d": "lsm6dsv16bxtr-etched.glb",+      "model_3d_plain": "lsm6dsv16bxtr.glb",+      "model_3d_step": "lsm6dsv16bxtr-etched.step",+      "model_3d_step_plain": "lsm6dsv16bxtr.step",+      "lbr": "lsm6dsv16bxtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C5267394"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDO/SA0",+        "type": "output",+        "description": "SPI 4-wire serial data output (SDO) or I²C device address least significant bit selection (SA0)."+      },+      {+        "number": "2",+        "name": "TDMout",+        "type": "output",+        "description": "TDM audio data output in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1."+      },+      {+        "number": "3",+        "name": "BCLK",+        "type": "input",+        "description": "TDM bit clock input in Mode 2; connect to GND or Vdd_IO when TDM interface is not used in Mode 1."+      },+      {+        "number": "4",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt output for sensor events; available in both I²C and SPI modes."+      },+      {+        "number": "5",+        "name": "Vdd_IO",+        "type": "power_in",+        "description": "Power supply for I/O pins (1.08 to 3.6 V); recommend 100 nF filter capacitor."+      },+      {+        "number": "6",+        "name": "AH1/QVAR1",+        "type": "input",+        "description": "Analog hub input 1 or Qvar electrode 1 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled."+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground supply (0 V)."+      },+      {+        "number": "8",+        "name": "Vdd",+        "type": "power_in",+        "description": "Core power supply (1.71 to 3.6 V); recommend 100 nF filter capacitor."+      },+      {+        "number": "9",+        "name": "AH2/QVAR2",+        "type": "input",+        "description": "Analog hub input 2 or Qvar electrode 2 when enabled; connect to Vdd or GND if analog hub and Qvar are disabled."+      },+      {+        "number": "10",+        "name": "INT2",+        "type": "output",+        "description": "Programmable interrupt 2 output for sensor events; available in both I²C and SPI modes."+      },+      {+        "number": "11",+        "name": "WCLK",+        "type": "input",+        "description": "TDM word clock input in Mode 2; connect to Vdd_IO or leave unconnected when TDM interface is not used in Mode 1."+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Communication mode selection: high enables SPI idle mode or I²C/MIPI I3C communication; low enables active SPI mode."+      },+      {+        "number": "13",+        "name": "SCL",+        "type": "bidirectional",+        "description": "I²C/MIPI I3C serial clock (open-drain in I²C) or SPI serial port clock input."+      },+      {+        "number": "14",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I²C/MIPI I3C serial data (open-drain bidirectional), SPI serial data input (SDI) in 4-wire mode, or serial data output (SDO) in 3-wire mode."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 27,+        "cost_usd": 0.2796,+        "at": "2026-09-21T19:54:51"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590906152630759424",+        "pages": 149,+        "sha256": "b68ff3a7d830e1a7",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file