component
LSM6DSRXTR
Public Made by Adomby adom
STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262
{
"schema_version": 1,
"type": "component",
"slug": "lsm6dsrxtr",
"title": "LSM6DSRXTR",
"brief": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"sensors",
"lsm6dsrxtr",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LSM6DSRXTR",
"manufacturer": "STMicroelectronics",
"package": "LGA-14(2.5x3)",
"pin_count": 14,
"category": "Sensors",
"subcategory": "Accelerometers",
"datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590445411237326848",
"parts": {
"symbol": "lsm6dsrxtr.kicad_sym",
"footprint": "lsm6dsrxtr.kicad_mod",
"model_3d": "lsm6dsrxtr-hero.glb",
"model_3d_plain": "lsm6dsrxtr.glb",
"model_3d_step": "lsm6dsrxtr-etched.step",
"model_3d_step_plain": "lsm6dsrxtr.step",
"lbr": "lsm6dsrxtr.lbr"
},
"distributor_links": {
"lcsc": "C2970339",
"digikey": "497-LSM6DSRXTR-ND",
"mouser": "511-LSM6DSRXTR"
},
"distributor_check": {
"checked_at": "2026-10-08T00:33:30Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "497-LSM6DSRXTR-ND",
"status": "found",
"lifecycle": "Last Time Buy"
},
"mouser": {
"pn": "511-LSM6DSRXTR",
"status": "found",
"lifecycle": "End of Life"
}
},
"pins": [
{
"number": "1",
"name": "SDO/SA0",
"type": "bidirectional",
"description": "Serial data output (SDO) for SPI 4-wire, and the I²C least significant address bit (SA0), which gives address 1101011b when tied to Vdd_IO and 1101010b when tied to GND."
},
{
"number": "2",
"name": "SDx",
"type": "bidirectional",
"description": "Must be connected to Vdd_IO or GND in Mode 1, carries the I²C master serial data (MSDA) in Mode 2, and carries the auxiliary SPI serial data input (SDI) and 3-wire SDO in Modes 3/4; it has no internal pull-up unless SHUB_PU_EN = 1."
},
{
"number": "3",
"name": "SCx",
"type": "bidirectional",
"description": "Must be connected to Vdd_IO or GND in Mode 1, carries the I²C master serial clock (MSCL) in Mode 2, and carries the auxiliary SPI serial port clock (SPC_Aux) in Modes 3/4."
},
{
"number": "4",
"name": "INT1",
"type": "bidirectional",
"description": "Programmable interrupt 1 output; it must be set to Vdd_IO when used as a MIPI I3CSM pure slave, and when left floating it has an internal pull-down and I²C/I3C are both active."
},
{
"number": "5",
"name": "Vdd_IO",
"type": "power_in",
"description": "Power supply for the I/O pins, with a 100 nF filter capacitor recommended."
},
{
"number": "6",
"name": "GND",
"type": "power_in",
"description": "0 V supply."
},
{
"number": "7",
"name": "GND",
"type": "power_in",
"description": "0 V supply."
},
{
"number": "8",
"name": "Vdd",
"type": "power_in",
"description": "Analog power supply, specified at 1.71 V to 3.6 V, with 100 nF decoupling capacitor placed as close to the pin as possible."
},
{
"number": "9",
"name": "INT2",
"type": "bidirectional",
"description": "Programmable interrupt 2 (INT2) or data enable (DEN); in Mode 2 it also serves as the I²C master external synchronization signal (MDRDY), and by default its output is forced to ground."
},
{
"number": "10",
"name": "OCS_Aux",
"type": "input",
"description": "Leave unconnected in Modes 1 and 2; in Modes 3 and 4 it is the auxiliary SPI 3/4-wire interface enable, with no internal pull-up by default."
},
{
"number": "11",
"name": "SDO_Aux",
"type": "output",
"description": "Connect to Vdd_IO or leave unconnected in Modes 1 and 2; in Mode 3 (3-wire aux SPI) leave unconnected, and in Mode 4 it is the auxiliary SPI 4-wire serial data output (SDO_Aux)."
},
{
"number": "12",
"name": "CS",
"type": "input",
"description": "I²C/SPI mode selection: 1 selects SPI idle mode with I²C communication enabled, and 0 selects SPI communication mode with I²C disabled; default has an internal pull-up."
},
{
"number": "13",
"name": "SCL",
"type": "bidirectional",
"description": "I²C/MIPI I3CSM serial clock (SCL) or SPI serial port clock (SPC) in all modes; for I²C it must be pulled up to Vdd_IO through external resistors."
},
{
"number": "14",
"name": "SDA",
"type": "bidirectional",
"description": "I²C/MIPI I3CSM serial data (SDA), SPI serial data input (SDI), or 3-wire SPI serial data output (SDO); for I²C it must be pulled up to Vdd_IO through an external resistor."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: Pin functions are mode-dependent (Mode 1, Mode 2, Mode 3/4). The pin names above are the primary fun; Operating voltage range for Vdd_IO is not in the supplied excerpt (it is in Table 3 on a page not in; Pin 1 (SDO/SA0) and pins 2, 3, 4, 9, 13, 14 are typed bidirectional because they change direction or",
"1/14 pins cited to the wrong page (name found elsewhere): ['8:Vdd@p1']"
],
"pages_sent": 29,
"cost_usd": 0.1285,
"at": "2026-10-08T00:33:15"
},
"datasheet": {
"url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590445411237326848",
"pages": 171,
"sha256": "11f685646ff7174a",
"source_tier": "lcsc"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 14,
"described": 14,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lsm6dsrxtr.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
2.5,
0.78
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lsm6dsrxtr-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
3,
2.5,
0.78
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "aee5d84b5b2e17ce927f10fd2a7cdc1a4992caf69629f4d70b7b80cd9ee303ad",
"checked": "2026-10-08",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "STMicroelectronics",
"Package": "LGA-14(2.5x3)",
"Category": "Sensors",
"Pins": "14"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lsm6dsrxtr"
],
"discovery_pitch": "LSM6DSRXTR (STMicroelectronics) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray",
"email": "[email protected]"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lsm6dsrxtr.kicad_sym",
"lsm6dsrxtr.kicad_mod",
"lsm6dsrxtr.glb",
"lsm6dsrxtr.step",
"lsm6dsrxtr.lbr",
"docs/hero.png",
"docs/lsm6dsrxtr-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lsm6dsrxtr-hero.glb",
"lsm6dsrxtr-hero.overlay.json"
],
"visibility": {
"public": true
}
}