LSM6DSOWTR

{
  "slug": "lsm6dsowtr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lsm6dsowtr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lsm6dsowtr.kicad_sym",
    "lsm6dsowtr.kicad_mod",
    "lsm6dsowtr.glb",
    "lsm6dsowtr.step",
    "lsm6dsowtr.lbr",
    "docs/hero.png",
    "docs/lsm6dsowtr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lsm6dsowtr-hero.glb",
    "lsm6dsowtr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LSM6DSOWTR",
    "manufacturer": "STMicroelectronics",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Sensors",
    "subcategory": "Accelerometers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039619942203392",
    "parts": {
      "symbol": "lsm6dsowtr.kicad_sym",
      "footprint": "lsm6dsowtr.kicad_mod",
      "model_3d": "lsm6dsowtr-hero.glb",
      "model_3d_plain": "lsm6dsowtr.glb",
      "model_3d_step": "lsm6dsowtr-etched.step",
      "model_3d_step_plain": "lsm6dsowtr.step",
      "lbr": "lsm6dsowtr.lbr"
    },
    "distributor_links": {
      "lcsc": "C2829074",
      "mouser": "511-LSM6DSOWTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-06T01:18:15Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": "511-LSM6DSOWTR",
        "status": "found",
        "lifecycle": "Obsolete"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "output",
        "description": "SPI serial data output (SDO) or I2C device address least significant bit (SA0); high when connected to VDDIO, low when connected to GND."
      },
      {
        "number": "2",
        "name": "SDx",
        "type": "output",
        "description": "Mode 1: must be connected to VDDIO or GND; Mode 2: I2C master serial data (MSDA)."
      },
      {
        "number": "3",
        "name": "SCx",
        "type": "output",
        "description": "Mode 1: must be connected to VDDIO or GND; Mode 2: I2C master serial clock (MSCL)."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "output",
        "description": "Programmable interrupt 1 output; must be pulled high when device operates as MIPI I3CSM pure slave."
      },
      {
        "number": "5",
        "name": "VDDIO",
        "type": "power_in",
        "description": "I/O power supply (1.62 V minimum independent IO supply) with recommended 100 nF filter capacitor."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (0 V supply)."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground (0 V supply)."
      },
      {
        "number": "8",
        "name": "VDD",
        "type": "power_in",
        "description": "Analog power supply (1.71 V to 3.6 V) with recommended 100 nF filter capacitor."
      },
      {
        "number": "9",
        "name": "INT2",
        "type": "output",
        "description": "Programmable interrupt 2 (INT2) / Data Enable (DEN) in Mode 1 or I2C master external synchronization signal (MDRDY) in Mode 2."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; leave electrically unconnected and soldered to PCB."
      },
      {
        "number": "11",
        "name": "NC",
        "type": "unconnected",
        "description": "No connection; leave electrically unconnected and soldered to PCB."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "I2C/MIPI I3CSM/SPI mode selection: logic 1 enables I2C/MIPI I3CSM, logic 0 enables SPI."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "bidirectional",
        "description": "I2C/MIPI I3CSM serial clock (SCL) with open-drain operation or SPI serial port clock (SPC) slave input."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C/MIPI I3CSM serial data (SDA) with open-drain operation, SPI serial data input (SDI), or 3-wire serial data output."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 24,
        "cost_usd": 0.2362,
        "at": "2026-10-06T01:18:02"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589039619942203392",
        "pages": 152,
        "sha256": "18f450de45bf02e8",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    }
  }
}