← Commit history

Initial commit: component/lsm6dso32xtr

Ray ·38f7d3b1e6 ·
2 files changed +227
README.mdadded+50
@@ -0,0 +1,50 @@+# LSM6DSO32XTR++**STMicroelectronics** · Accelerometers · LGA-14(2.5x3)++LSM6DSO32XTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDO/SA0 | bidirectional | SPI 4-wire serial data output (SDO) or I²C/MIPI I3CSM slave address least significant bit (SA0) |+| 2 | SDx | bidirectional | Sensor hub I²C serial data master (MSDA) in Mode 2; connect to Vdd_IO or GND in Mode 1 |+| 3 | SCx | bidirectional | Sensor hub I²C serial clock master (MSCL) in Mode 2; connect to Vdd_IO or GND in Mode 1 |+| 4 | INT1 | output | Programmable interrupt output 1; floating (internal pull-down) enables I²C/MIPI I3CSM coexistence, tied to Vdd_IO enables MIPI I3CSM only |+| 5 | Vdd_IO | power_in | I/O supply voltage with recommended 100 nF ceramic bypass capacitor to ground |+| 6 | GND | power_in | Ground reference (0 V) |+| 7 | GND | power_in | Ground reference (0 V) |+| 8 | Vdd | power_in | Analog core supply voltage 1.71-3.6 V with recommended 100 nF ceramic bypass capacitor to ground |+| 9 | INT2 | bidirectional | Programmable interrupt output 2, data enable (DEN), and I²C sensor hub external synchronization input (MDRDY in Mode 2) |+| 10 | NC | unconnected | No connection; leave unconnected or connect to Vdd_IO |+| 11 | NC | unconnected | No connection; leave unconnected or connect to Vdd_IO |+| 12 | CS | input | Serial interface mode selection: high selects I²C/MIPI I3CSM (SPI idle), low selects SPI communication mode |+| 13 | SCL | bidirectional | I²C/MIPI I3CSM serial clock (SCL) or SPI serial port clock (SPC); open-drain with internal pull-up |+| 14 | SDA | bidirectional | I²C/MIPI I3CSM serial data (SDA), SPI serial data input (SDI), or 3-wire SPI data output (SDO); open-drain with internal pull-up |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `LSM6DSO32XTR`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)+- 3D model files: `lsm6dso32xtr-etched.step` / `lsm6dso32xtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lsm6dso32xtr.step` / `lsm6dso32xtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838954963755008) (162 pp, sha256 `45325a3fe164a8aa`, retrieved 2026-09-21, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-4-6` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lsm6dso32xtr-datasheet.pdf)
page.jsonadded+177
@@ -0,0 +1,177 @@+{+  "slug": "lsm6dso32xtr",+  "version": "0.1.0",+  "type": "component",+  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "sensors",+    "lsm6dso32xtr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "lsm6dso32xtr.kicad_sym",+    "lsm6dso32xtr.kicad_mod",+    "lsm6dso32xtr.glb",+    "lsm6dso32xtr.step",+    "lsm6dso32xtr.lbr",+    "docs/hero.png",+    "docs/lsm6dso32xtr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "LSM6DSO32XTR",+    "manufacturer": "STMicroelectronics",+    "package": "LGA-14(2.5x3)",+    "pin_count": 14,+    "category": "Sensors",+    "subcategory": "Accelerometers",+    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838954963755008",+    "parts": {+      "symbol": "lsm6dso32xtr.kicad_sym",+      "footprint": "lsm6dso32xtr.kicad_mod",+      "model_3d": "lsm6dso32xtr-etched.glb",+      "model_3d_plain": "lsm6dso32xtr.glb",+      "model_3d_step": "lsm6dso32xtr-etched.step",+      "model_3d_step_plain": "lsm6dso32xtr.step",+      "lbr": "lsm6dso32xtr.lbr"+    },+    "distributor_links": {+      "lcsc": "C3663738"+    },+    "pins": [+      {+        "number": "1",+        "name": "SDO/SA0",+        "type": "bidirectional",+        "description": "SPI 4-wire serial data output (SDO) or I²C/MIPI I3CSM slave address least significant bit (SA0)"+      },+      {+        "number": "2",+        "name": "SDx",+        "type": "bidirectional",+        "description": "Sensor hub I²C serial data master (MSDA) in Mode 2; connect to Vdd_IO or GND in Mode 1"+      },+      {+        "number": "3",+        "name": "SCx",+        "type": "bidirectional",+        "description": "Sensor hub I²C serial clock master (MSCL) in Mode 2; connect to Vdd_IO or GND in Mode 1"+      },+      {+        "number": "4",+        "name": "INT1",+        "type": "output",+        "description": "Programmable interrupt output 1; floating (internal pull-down) enables I²C/MIPI I3CSM coexistence, tied to Vdd_IO enables MIPI I3CSM only"+      },+      {+        "number": "5",+        "name": "Vdd_IO",+        "type": "power_in",+        "description": "I/O supply voltage with recommended 100 nF ceramic bypass capacitor to ground"+      },+      {+        "number": "6",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V)"+      },+      {+        "number": "7",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference (0 V)"+      },+      {+        "number": "8",+        "name": "Vdd",+        "type": "power_in",+        "description": "Analog core supply voltage 1.71-3.6 V with recommended 100 nF ceramic bypass capacitor to ground"+      },+      {+        "number": "9",+        "name": "INT2",+        "type": "bidirectional",+        "description": "Programmable interrupt output 2, data enable (DEN), and I²C sensor hub external synchronization input (MDRDY in Mode 2)"+      },+      {+        "number": "10",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; leave unconnected or connect to Vdd_IO"+      },+      {+        "number": "11",+        "name": "NC",+        "type": "unconnected",+        "description": "No connection; leave unconnected or connect to Vdd_IO"+      },+      {+        "number": "12",+        "name": "CS",+        "type": "input",+        "description": "Serial interface mode selection: high selects I²C/MIPI I3CSM (SPI idle), low selects SPI communication mode"+      },+      {+        "number": "13",+        "name": "SCL",+        "type": "bidirectional",+        "description": "I²C/MIPI I3CSM serial clock (SCL) or SPI serial port clock (SPC); open-drain with internal pull-up"+      },+      {+        "number": "14",+        "name": "SDA",+        "type": "bidirectional",+        "description": "I²C/MIPI I3CSM serial data (SDA), SPI serial data input (SDI), or 3-wire SPI data output (SDO); open-drain with internal pull-up"+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-4-6",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 30,+        "cost_usd": 0.3173,+        "at": "2026-09-21T22:10:19"+      },+      "datasheet": {+        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589838954963755008",+        "pages": 162,+        "sha256": "45325a3fe164a8aa",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 14,+        "described": 14,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file