LSM6DSO16ISTR

{
  "slug": "lsm6dso16istr",
  "version": "0.1.0",
  "type": "component",
  "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "sensors",
    "lsm6dso16istr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lsm6dso16istr.kicad_sym",
    "lsm6dso16istr.kicad_mod",
    "lsm6dso16istr.glb",
    "lsm6dso16istr.step",
    "lsm6dso16istr.lbr",
    "docs/hero.png",
    "docs/lsm6dso16istr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lsm6dso16istr-hero.glb",
    "lsm6dso16istr-hero.overlay.json"
  ],
  "component": {
    "mpn": "LSM6DSO16ISTR",
    "manufacturer": "STMicroelectronics",
    "package": "LGA-14(2.5x3)",
    "pin_count": 14,
    "category": "Sensors",
    "subcategory": "Accelerometers",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8551491705045209088",
    "parts": {
      "symbol": "lsm6dso16istr.kicad_sym",
      "footprint": "lsm6dso16istr.kicad_mod",
      "model_3d": "lsm6dso16istr-hero.glb",
      "model_3d_plain": "lsm6dso16istr.glb",
      "model_3d_step": "lsm6dso16istr-etched.step",
      "model_3d_step_plain": "lsm6dso16istr.step",
      "lbr": "lsm6dso16istr.lbr"
    },
    "distributor_links": {
      "lcsc": "C5267402",
      "digikey": "497-LSM6DSO16ISTR-ND",
      "mouser": "511-LSM6DSO16ISTR"
    },
    "distributor_check": {
      "checked_at": "2026-10-08T03:46:00Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "497-LSM6DSO16ISTR-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "511-LSM6DSO16ISTR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SDO/SA0",
        "type": "bidirectional",
        "description": "Mode 1: SPI 4-wire serial data output (SDO); Mode 2: I²C least significant bit of the device address (SA0), where SA0 tied to VDD selects address 1101011b and tied to GND selects 1101010b; default is input without pull-up, with pull-up enabled by SDO_PU_EN in PIN_CTRL (02h)."
      },
      {
        "number": "2",
        "name": "MSDA",
        "type": "bidirectional",
        "description": "Mode 1: connect to Vdd_IO or GND; Mode 2: I²C serial data line of the master interface (MSDA), default input without pull-up, with pull-up enabled by SHUB_PU_EN in MASTER_CONFIG (14h)."
      },
      {
        "number": "3",
        "name": "MSCL",
        "type": "bidirectional",
        "description": "Mode 1: connect to Vdd_IO or GND; Mode 2: I²C serial clock of the master interface (MSCL), default input without pull-up, with pull-up enabled by SHUB_PU_EN in MASTER_CONFIG (14h)."
      },
      {
        "number": "4",
        "name": "INT1",
        "type": "bidirectional",
        "description": "Programmable interrupt 1 in both modes; default is input with pull-down, and INT1 must be set to 0 or left unconnected during power-on."
      },
      {
        "number": "5",
        "name": "Vdd_IO",
        "type": "power_in",
        "description": "Power supply for the I/O pins; a 100 nF filter capacitor is recommended."
      },
      {
        "number": "6",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "0 V supply."
      },
      {
        "number": "8",
        "name": "Vdd",
        "type": "power_in",
        "description": "Power supply for the device core and analog circuitry; a 100 nF filter capacitor is recommended, placed as near as possible to the pin, and the analog supply range is stated as 1.71 V to 3.6 V."
      },
      {
        "number": "9",
        "name": "INT2",
        "type": "bidirectional",
        "description": "Mode 1: programmable interrupt 2 (INT2); Mode 2: programmable interrupt 2 (INT2) multiplexed with the I²C master external synchronization signal (MDRDY); default output is forced to ground."
      },
      {
        "number": "10",
        "name": "RES",
        "type": "unconnected",
        "description": "Reserved; leave electrically unconnected (pin is soldered to the PCB)."
      },
      {
        "number": "11",
        "name": "RES",
        "type": "passive",
        "description": "Reserved; connect to Vdd_IO or leave electrically unconnected (pin is soldered to the PCB)."
      },
      {
        "number": "12",
        "name": "CS",
        "type": "input",
        "description": "I²C/SPI mode selection: 1 selects SPI idle mode with I²C communication enabled, 0 selects SPI communication mode with I²C disabled; default input with pull-up."
      },
      {
        "number": "13",
        "name": "SCL",
        "type": "input",
        "description": "I²C serial clock (SCL) or SPI serial port clock (SPC); default input without pull-up."
      },
      {
        "number": "14",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I²C serial data (SDA), SPI serial data input (SDI), or 3-wire interface serial data output (SDO); default input without pull-up."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet names the package LGA-14L (2.5 x 3.0 x 0.86 mm, with 0.83 mm typical height in the fea; Pins 1, 2, 3, 9 and 14 have mode-dependent functions (Mode 1 vs Mode 2 connection). The type shown i; The datasheet does not give a numeric voltage range for Vdd_IO. The features list only 'independent "
        ],
        "pages_sent": 31,
        "cost_usd": 0.1187,
        "at": "2026-10-08T03:45:46"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8551491705045209088",
        "pages": 107,
        "sha256": "30f343bb97cd697d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 14,
        "described": 14,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lsm6dso16istr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "a441fc384db400c96db6affec2f9c22a5d76b0729e0f2fc46c53746be60b76ca",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lsm6dso16istr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          2.5,
          0.78
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f84839adedd2e12bfc6b41a6550588f78172231a54aacb7c6a6768b4b8bc34fc",
        "checked": "2026-10-08",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}