Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

main

Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206

Name	Last commit message	Last updated
docs	Publish 0.1.0 · Ray	2d ago
viewers	lsm6dsmtr: viewers · Ray	2d ago
lsm6dsmtr-etched.glb	lsm6dsmtr: factory component page (tier=lcsc) · Ray	2d ago
lsm6dsmtr-etched.step	lsm6dsmtr: factory component page (tier=lcsc) · Ray	2d ago
lsm6dsmtr-hero.glb	Publish 0.1.0 · Ray	2d ago
lsm6dsmtr-hero.overlay.json	Publish 0.1.0 · Ray	2d ago
lsm6dsmtr.glb	Publish 0.1.0 · Ray	2d ago
lsm6dsmtr.kicad_mod	Publish 0.1.0 · Ray	2d ago
lsm6dsmtr.kicad_sym	Publish 0.1.0 · Ray	2d ago
lsm6dsmtr.lbr	Publish 0.1.0 · Ray	2d ago
lsm6dsmtr.step	Publish 0.1.0 · Ray	2d ago
package.json	lsm6dsmtr: LCSC part number C94048 (was published as the bare integer) · Ray	1d ago
page.json	lsm6dsmtr: LCSC part number C94048 (was published as the bare integer) · Ray	1d ago
README.md	Initial commit: component/lsm6dsmtr · Ray	2d ago

LSM6DSMTR

STMicroelectronics · Accelerometers · LGA-14(2.5x3)

LSM6DSMTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	SDO/SA0	output	SPI 4-wire interface serial data output (SDO) or I2C least significant bit of the device address (SA0).
2	SDx	bidirectional	I2C serial data master (MSDA) in Mode 2, Auxiliary SPI 3/4-wire interface serial data input (SDI) and 3-wire serial data output (SDO) in Modes 3/4, or connect to VDDIO or GND in Mode 1.
3	SCx	input	I2C serial clock master (MSCL) in Mode 2, Auxiliary SPI 3-wire interface serial port clock (SPC_Aux) in Modes 3/4, or connect to VDDIO or GND in Mode 1.
4	INT1	output	Programmable interrupt 1 output.
5	VDDIO	power_in	Power supply for I/O pins with recommended 100 nF filter capacitor.
6	GND	power_in	Ground (0 V supply).
7	GND	power_in	Ground (0 V supply).
8	VDD	power_in	Power supply with recommended 100 nF filter capacitor.
9	INT2	output	Programmable interrupt 2 (INT2) output, data enable (DEN) input, or I2C master external synchronization signal (MDRDY) input depending on mode and register configuration.
10	OCS_Aux	input	Auxiliary SPI 3/4-wire interface chip select enable; leave unconnected in Modes 1 and 2.
11	SDO_Aux	output	Auxiliary SPI 4-wire interface serial data output (SDO_Aux); leave unconnected in 3-wire mode and in Modes 1 and 2.
12	CS	input	I2C/SPI mode selection input (high = SPI idle mode / I2C communication enabled; low = SPI communication mode / I2C disabled).
13	SCL	bidirectional	I2C serial clock (SCL) or SPI serial port clock (SPC) depending on interface mode.
14	SDA	bidirectional	I2C serial data (SDA), SPI serial data input (SDI), or 3-wire interface serial data output (SDO) depending on interface mode.

Key specifications

Parameter	Value
Manufacturer	STMicroelectronics
Package	LGA-14(2.5x3)
Category	Sensors
Pins	14

CAD (KiCad official)

Symbol: LSM6DSMTR
Footprint: Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm
3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)
3D model files: lsm6dsmtr-etched.step / lsm6dsmtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lsm6dsmtr.step / lsm6dsmtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: STMicroelectronics datasheet (126 pp, sha256 2b2e7b28c7820f4f, retrieved 2026-10-06, tier: lcsc)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF