component
LSM6DSMTR
Public Made by Adomby adom
STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
← Commit history
README.mdadded+50@@ -0,0 +1,50 @@+# LSM6DSMTR++**STMicroelectronics** · Accelerometers · LGA-14(2.5x3)++LSM6DSMTR from STMicroelectronics, in a LGA-14(2.5x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | SDO/SA0 | output | SPI 4-wire interface serial data output (SDO) or I2C least significant bit of the device address (SA0). |+| 2 | SDx | bidirectional | I2C serial data master (MSDA) in Mode 2, Auxiliary SPI 3/4-wire interface serial data input (SDI) and 3-wire serial data output (SDO) in Modes 3/4, or connect to VDDIO or GND in Mode 1. |+| 3 | SCx | input | I2C serial clock master (MSCL) in Mode 2, Auxiliary SPI 3-wire interface serial port clock (SPC_Aux) in Modes 3/4, or connect to VDDIO or GND in Mode 1. |+| 4 | INT1 | output | Programmable interrupt 1 output. |+| 5 | VDDIO | power_in | Power supply for I/O pins with recommended 100 nF filter capacitor. |+| 6 | GND | power_in | Ground (0 V supply). |+| 7 | GND | power_in | Ground (0 V supply). |+| 8 | VDD | power_in | Power supply with recommended 100 nF filter capacitor. |+| 9 | INT2 | output | Programmable interrupt 2 (INT2) output, data enable (DEN) input, or I2C master external synchronization signal (MDRDY) input depending on mode and register configuration. |+| 10 | OCS_Aux | input | Auxiliary SPI 3/4-wire interface chip select enable; leave unconnected in Modes 1 and 2. |+| 11 | SDO_Aux | output | Auxiliary SPI 4-wire interface serial data output (SDO_Aux); leave unconnected in 3-wire mode and in Modes 1 and 2. |+| 12 | CS | input | I2C/SPI mode selection input (high = SPI idle mode / I2C communication enabled; low = SPI communication mode / I2C disabled). |+| 13 | SCL | bidirectional | I2C serial clock (SCL) or SPI serial port clock (SPC) depending on interface mode. |+| 14 | SDA | bidirectional | I2C serial data (SDA), SPI serial data input (SDI), or 3-wire interface serial data output (SDO) depending on interface mode. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | STMicroelectronics |+| Package | LGA-14(2.5x3) |+| Category | Sensors |+| Pins | 14 |++## CAD (KiCad official)++- Symbol: `LSM6DSMTR`+- Footprint: `Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mm`+- 3D model: LGA-14(2.5x3) (KiCad packages3D, STEP)+- 3D model files: `lsm6dsmtr-etched.step` / `lsm6dsmtr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lsm6dsmtr.step` / `lsm6dsmtr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [STMicroelectronics datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886385675264000) (126 pp, sha256 `2b2e7b28c7820f4f`, retrieved 2026-10-06, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/lsm6dsmtr-datasheet.pdf)
page.jsonadded+194@@ -0,0 +1,194 @@+{+ "slug": "lsm6dsmtr",+ "version": "0.1.0",+ "type": "component",+ "description": "STMicroelectronics Accelerometers, LGA-14(2.5x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "tags": [+ "component",+ "sensors",+ "lsm6dsmtr",+ "factory-2.0.0",+ "extractor-text"+ ],+ "dependencies": {},+ "hero": {+ "type": "image",+ "path": "docs/hero.png"+ },+ "files": [+ "page.json",+ "README.md",+ "lsm6dsmtr.kicad_sym",+ "lsm6dsmtr.kicad_mod",+ "lsm6dsmtr.glb",+ "lsm6dsmtr.step",+ "lsm6dsmtr.lbr",+ "docs/hero.png",+ "docs/lsm6dsmtr-datasheet.pdf",+ "viewers/symbol.html",+ "viewers/footprint.html",+ "lsm6dsmtr-hero.glb",+ "lsm6dsmtr-hero.overlay.json"+ ],+ "component": {+ "mpn": "LSM6DSMTR",+ "manufacturer": "STMicroelectronics",+ "package": "LGA-14(2.5x3)",+ "pin_count": 14,+ "category": "Sensors",+ "subcategory": "Accelerometers",+ "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886385675264000",+ "parts": {+ "symbol": "lsm6dsmtr.kicad_sym",+ "footprint": "lsm6dsmtr.kicad_mod",+ "model_3d": "lsm6dsmtr-hero.glb",+ "model_3d_plain": "lsm6dsmtr.glb",+ "model_3d_step": "lsm6dsmtr-etched.step",+ "model_3d_step_plain": "lsm6dsmtr.step",+ "lbr": "lsm6dsmtr.lbr"+ },+ "distributor_links": {+ "lcsc": 94048,+ "digikey": "497-16696-2-ND",+ "mouser": "511-LSM6DSMTR"+ },+ "distributor_check": {+ "checked_at": "2026-10-06T00:17:36Z",+ "source": "Component Ocean /api/assign-pns",+ "digikey": {+ "pn": "497-16696-2-ND",+ "status": "found",+ "lifecycle": "Active"+ },+ "mouser": {+ "pn": "511-LSM6DSMTR",+ "status": "found"+ }+ },+ "pins": [+ {+ "number": "1",+ "name": "SDO/SA0",+ "type": "output",+ "description": "SPI 4-wire interface serial data output (SDO) or I2C least significant bit of the device address (SA0)."+ },+ {+ "number": "2",+ "name": "SDx",+ "type": "bidirectional",+ "description": "I2C serial data master (MSDA) in Mode 2, Auxiliary SPI 3/4-wire interface serial data input (SDI) and 3-wire serial data output (SDO) in Modes 3/4, or connect to VDDIO or GND in Mode 1."+ },+ {+ "number": "3",+ "name": "SCx",+ "type": "input",+ "description": "I2C serial clock master (MSCL) in Mode 2, Auxiliary SPI 3-wire interface serial port clock (SPC_Aux) in Modes 3/4, or connect to VDDIO or GND in Mode 1."+ },+ {+ "number": "4",+ "name": "INT1",+ "type": "output",+ "description": "Programmable interrupt 1 output."+ },+ {+ "number": "5",+ "name": "VDDIO",+ "type": "power_in",+ "description": "Power supply for I/O pins with recommended 100 nF filter capacitor."+ },+ {+ "number": "6",+ "name": "GND",+ "type": "power_in",+ "description": "Ground (0 V supply)."+ },+ {+ "number": "7",+ "name": "GND",+ "type": "power_in",+ "description": "Ground (0 V supply)."+ },+ {+ "number": "8",+ "name": "VDD",+ "type": "power_in",+ "description": "Power supply with recommended 100 nF filter capacitor."+ },+ {+ "number": "9",+ "name": "INT2",+ "type": "output",+ "description": "Programmable interrupt 2 (INT2) output, data enable (DEN) input, or I2C master external synchronization signal (MDRDY) input depending on mode and register configuration."+ },+ {+ "number": "10",+ "name": "OCS_Aux",+ "type": "input",+ "description": "Auxiliary SPI 3/4-wire interface chip select enable; leave unconnected in Modes 1 and 2."+ },+ {+ "number": "11",+ "name": "SDO_Aux",+ "type": "output",+ "description": "Auxiliary SPI 4-wire interface serial data output (SDO_Aux); leave unconnected in 3-wire mode and in Modes 1 and 2."+ },+ {+ "number": "12",+ "name": "CS",+ "type": "input",+ "description": "I2C/SPI mode selection input (high = SPI idle mode / I2C communication enabled; low = SPI communication mode / I2C disabled)."+ },+ {+ "number": "13",+ "name": "SCL",+ "type": "bidirectional",+ "description": "I2C serial clock (SCL) or SPI serial port clock (SPC) depending on interface mode."+ },+ {+ "number": "14",+ "name": "SDA",+ "type": "bidirectional",+ "description": "I2C serial data (SDA), SPI serial data input (SDI), or 3-wire interface serial data output (SDO) depending on interface mode."+ }+ ],+ "provenance": {+ "extractor": "extract_pins 0.3",+ "factory_chain": {+ "factory": "2.0.0",+ "extractor": "extract_pins 0.3",+ "primary_model": "claude-haiku-4-5-20251001",+ "primary_mode": "text",+ "consensus_model": "claude-sonnet-5-5",+ "consensus": "agreed",+ "guards": "pin_guards 0.1: passed",+ "guard_notes": [],+ "pages_sent": 24,+ "cost_usd": 0.265,+ "at": "2026-10-06T00:17:23"+ },+ "datasheet": {+ "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886385675264000",+ "pages": 126,+ "sha256": "2b2e7b28c7820f4f",+ "source_tier": "lcsc"+ },+ "cad": "KiCad official (CC-BY-SA 4.0)",+ "pins": {+ "total": 14,+ "described": 14,+ "cites_pages": true,+ "refuses_to_fabricate": true+ }+ },+ "viewers": {+ "symbol": "viewers/symbol.html",+ "footprint": "viewers/footprint.html"+ }+ },+ "visibility": "public",+ "org": "adom",+ "author": {+ "name": "Ray",+ "email": "[email protected]"+ }+}